8-Speed Automatic Transmission Assembly for 2011-2012 Audi Q5
Product Notes Read before buying
This is an 8-speed automatic transmission for an all-wheel drive (AWD) vehicle. It fits only models with a 2.0L engine and a matching transmission ID of 'NXX'. Please verify your vehicle's specifications before ordering.
Voice or type your vehicle details and Wrenchy will confirm fitment in seconds.
Vehicle Fitment Guide
This part fits the following vehicles:
| SubmodelSUB- MODEL |
Body Style | Years | Engine | Attributes |
|---|---|---|---|---|
| Base | SUV | 2011 | L4 2.0L Turbo | AWD | Automatic |
| Premium | SUV | 2011 - 2012 | L4 2.0L Turbo | AWD | Automatic |
| Premium Plus | SUV | 2011 - 2012 | L4 2.0L Turbo | AWD | Automatic |
| Elite | SUV | 2012 | L4 2.0L Turbo | AWD | Automatic |
| Luxury | SUV | 2012 | L4 2.0L Turbo | AWD | Automatic |
| Trendy | SUV | 2012 | L4 2.0L Turbo | AWD | Automatic |
Know This Transmission Before You Buy
The research behind our purchase interview — recalls, bulletins and real install economics for this transmission family:
A quick look at your own vehicle makes sure the right transmission shows up:
- Verify the three-letter transmission code is NXX on the spare tire well build sticker or the transmission case ID plate.
- Confirm the engine is a 2.0L TFSI 4-cylinder (engine code CAEB).
- Confirm the vehicle has Quattro All-Wheel Drive.
What the install really takes — plan and budget with confidence:
Special tools this job needs:
- Triple Square (XZN) socket set (specifically M12 and M14)
- Torx T40 socket
- Hex/Allen sockets (5mm and 10mm)
- Fluid filling pump with curved hook adapter
- OBD2 diagnostic scan tool (Ross-Tech VCDS, OBDeleven, or ODIS)
- Engine support bar
- Transmission jack
Budget for these consumables at install:
- OE-spec G 060 162 A2 transmission fluid (e.g., ZF LifeguardFluid 8)
- Integrated transmission fluid filter and pan gasket kit
- Single-use aluminum transmission pan stretch bolts
- Subframe X-brace stretch bolts
- Torque converter / input shaft hub seal
- Axle seals
- Driveshaft and mount stretch bolts
- Transmission cooler line flush solvent
What your vehicle’s computers will need after the swap:
What’s involved: Immobilizer synchronization (Component Protection unlock) and basic settings/adaptation run
The transmission is tied to the vehicle's immobilizer system (Component Protection). After installation, the vehicle will display a 'transmission lock' message and remain in safe mode until it is electronically married to the car using Audi's online ODIS software. Alternatively, the original mechatronic unit can be cloned onto the replacement unit, or the original functioning mechatronic unit can be physically swapped into the replacement transmission to bypass programming.
Pro tips for a smooth first start-up — hand them to whoever does the install:
- Torque Converter Seating: Ensure the torque converter is fully seated (three distinct clicks/drops) before bolting the transmission to the engine to avoid crushing the internal oil pump.
- Subframe X-Brace Alignment: Reinstall the subframe brace using new stretch bolts and torque to factory specifications to maintain structural alignment.
- Strict Temperature-Based Fluid Fill: Fluid level must be checked only when the transmission fluid temperature is between 30°C and 50°C (or 30°C and 40°C depending on spec) with the engine running at idle in Park.
- Mechatronic Cleanliness: If swapping the original mechatronic unit, the work area must be surgically clean to prevent sensitive solenoid clogging.
- Mechatronics Connector Sleeve: Replace this common leak point sleeve while the pan is off.
Easy to get right once you know them:
- Assuming the transmission is plug-and-play and failing to plan for the Component Protection programming/unlock.
- Reusing the single-use aluminum pan bolts, which leads to bolt breakage or fluid leaks.
- Checking the transmission fluid level with the engine turned off, which causes severe underfilling.
- Using generic multi-vehicle ATF instead of the required ZF Lifeguard 8 / Audi G 060 162 A2 spec fluid.
- Skipping the professional transmission cooler and line flush, which can contaminate the replacement unit with debris from the failed transmission.
- Ordering the transmission without verifying the specific three-letter 'NXX' code on the original unit's ID plate.
Not issues with the units on this page — the manufacturer documented these for every transmission of this family, wherever you buy one. Handy for your installer:
🔎 Recommended at install: TCM software update performed at an authorized service center using SVM code 02A072 (TSB 37-12-65 / 2030007/4)
🔎 Recommended at install: Replace single-use aluminum stretch bolts and pan gasket; torque correctly to prevent warping
🔎 Recommended at install: Replace torque converter
🔎 Recommended at install: Replace mechatronics unit or solenoids; address internal cross-leakage
🔎 Recommended at install: TCM software update to optimize shift points
Researched from factory recalls, TSBs and OEM service data (reference unit 400-63006-1995855). Unit-specific details — mileage, condition, warranty, freight — are covered in the checkout interview.
Policies, in plain English.
Shipping & Handling
- Ships by LTL freight on a pallet — a real freight truck, not a parcel van
- Your checkout freight quote covers delivery to your door (liftgate service included for residential addresses)
- The carrier calls ahead to schedule a delivery window — someone must be present to receive it
- Typically palletized and picked up within 2–3 business days; transit time depends on distance
120-Day Warranty
This part includes a 120-day warranty.
- If the part fails within the warranty window, we'll replace it or refund per the coverage terms
- Coverage is parts-only — installation labor is not included
- Warranty covers defects — not installation errors, misuse, or damage after installation
Your pre-purchase interview reviews these exact terms with you before anything is charged.
Returns (30 Days)
We accept returns of uninstalled parts within 30 days of delivery for this part.
- Defective parts: We will replace the part or issue a refund at our discretion
- Programming: "Needs to be programmed to my vehicle" is not a valid return reason. Many modules require dealer programming — we're happy to help connect you with resources if your dealer says it's not programmable
- Return shipping: This part ships by freight (LTL) — the part price is refundable per the terms above, but shipping costs are non-refundable and return freight follows the seller's return terms. Your pre-purchase interview walks through the exact numbers before you buy
- Parts must be returned in original packaging and unmodified condition
- Poorly packaged returns that arrive damaged will not be credited
Damaged in Shipping?
Freight damage is rare — and you're fully protected when you do two things at delivery:
- Inspect before you sign — you're allowed time to look the pallet over while the driver waits
- Write any damage on the delivery receipt before signing — that one line is what makes a freight claim succeed
- Severe damage? Refuse the delivery — it goes back at no cost to you and we make it right
- Photograph the pallet before unwrapping; report concealed damage within 24 hours of delivery
We handle the carrier claim — you just help document it. Your pre-purchase interview walks through this checklist too.
Order Cancellation
Cancel before shipment for a full refund. Once the pallet has been built, a preparation charge may apply — and once the freight carrier picks it up, shipping costs are non-refundable and standard return terms apply. Your pre-purchase interview shows the exact numbers before you pay.
Expert Guides
2011-2012 Audi Q5 ZF 8HP55A: Problems, Identification, and Used Replacement
Identify the NXX transmission code, understand common mechatronic failures, and learn when to buy used.
Read Full Guide →Related Trouble Codes (OBD-II)
6 matching guidesIf your scan tool is showing one of these trouble codes, this part is a common fix. Each guide explains the code, how to diagnose it, and exactly what to replace.
Miscellaneous Information
OEM Part Numbers:
Audi: 0BK-300-039-H-002, 0BK300039H, 0BK300039H002
Other: NXX
Fits Years: 2011 2012
Your Go-To Place
for auto parts.
In operation since 2007. Trusted by over a million DIYers, mechanics, and body shops across all 50 states.
Confirmed Before It Ships
Every freight order is confirmed through a short guided interview — fitment, condition, delivery and warranty terms, e-signed before you're charged.
Trusted Since 2007
Nearly two decades of shipping parts to professionals & enthusiasts.
Backed By The Selling Yard
This unit ships with the selling yard's 120-day warranty. Longer plans can be requested during checkout.
What buyers are saying.
Racing Partner Videos
