Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.

1.6L DOHC 16-Valve Engine Complete Assembly for 2020-2025 Nissan Kicks, Versa

Out of Stock
Pay-by-bank price
$ 390
or $402 paying by card
🏦 3% bank discount on your entire order — arranged at checkout

Product Notes Read before buying

Odometer 48,400 miles 🛡 120-day warranty included
This is a used engine assembly for vehicles with a 1.6L 4-cylinder engine (HR16DE) and an automatic transmission. This engine produces 122 horsepower and 114 lb-ft of torque. It includes the engine block up to the flywheel. You may need to swap your original electrical and induction systems. Built for the US market; verify your vehicle's 4th VIN digit is C.

This engine assembly fits vehicles with a 1.6L (HR16DE) engine and a 'C' in the 4th position of the VIN. It is for use with an Automatic CVT transmission only.
Wrenchy the Robot
Not sure? Ask WrenchyYour Parts Assistant.

Voice or type your vehicle details and Wrenchy will confirm fitment in seconds.

Vehicle Fitment Guide

This part fits the following vehicles:

Nissan 2 models(tapclick to expand)(tapclick to hide)
Kicks 2020-2025 (tapclick to expand)(tapclick to hide)
Swipe left/right to see more info
SubmodelSUB-
MODEL
Body Style Years Engine Attributes
Advance SUV 2020 - 2024 L4 1.6L FWD | Automatic CVT
Exclusive SUV 2020 - 2024 L4 1.6L FWD | Automatic CVT
S SUV 2020 - 2024 L4 1.6L FWD | Automatic CVT
SR SUV 2020 - 2024 L4 1.6L FWD | Automatic CVT
SV SUV 2020 - 2024 L4 1.6L FWD | Automatic CVT
Platinum SUV 2021 - 2024 L4 1.6L FWD | Automatic CVT
Play Advance SUV 2024 L4 1.6L FWD | Automatic CVT
2022 - 2023, 2025
Applies to every configuration above: Hollander: KICKS 20-24 (1.6L, VIN C, 4th digit, HR16DE) | KICKS 25 1.6L (VIN C, 4th digit, HR16DE); engine_size: include 1.6L; engine_code: include HR16DE; vin_digit_4: include C; transmission: include Automatic CVT; drive_type: include FWD; fuel_type: include GAS; engine_config: include L4 [inferred]
Versa 2020-2025 (tapclick to expand)(tapclick to hide)
Swipe left/right to see more info
SubmodelSUB-
MODEL
Body Style Years Engine Attributes
Advance Sedan 2020 - 2025 L4 1.6L FWD | Automatic CVT
Exclusive Sedan 2020 - 2025 L4 1.6L FWD | Automatic CVT
Platinum Sedan 2020 - 2022 L4 1.6L FWD | Automatic CVT
S Sedan 2020 - 2025 L4 1.6L FWD | Automatic CVT
Sense Sedan 2020 - 2025 L4 1.6L FWD | Automatic CVT
SR Sedan 2020 - 2025 L4 1.6L FWD | Automatic CVT
SV Sedan 2020 - 2025 L4 1.6L FWD | Automatic CVT
2021, 2023 - 2024
Applies to every configuration above: Hollander: VERSA 20-25 (1.6L, VIN C, 4th digit, HR16DE), CVT; engine_size: include 1.6L; engine_code: include HR16DE; vin_digit_4: include C; transmission: include Automatic CVT; drive_type: include FWD; fuel_type: include GAS; engine_config: include L4 [inferred]
Verify before ordering — please confirm your vehicle's year, make, model and sub-model specifications before placing your order. If anything is unclear, our customer service team is available to help.

Know This Engine Before You Buy

The research behind our purchase interview — recalls, bulletins and real install economics for this engine family:

A quick look at your own vehicle makes sure the right engine shows up:

  • Verify the 4th digit of the VIN is 'C'.
  • Confirm the vehicle has a CVT automatic transmission.
  • Verify the engine block stamping reads 'HR16'.
  • Ensure the current engine has the plastic intake manifold that wraps over the top of the engine to the front.
🔎 Where to look: Check the 17-digit VIN plate on the dashboard or driver's door jamb for 'C' in the 4th position.

What the install really takes — plan and budget with confidence:

10 to 15 hoursshop labor$1,200 to $2,600typical shop bill, on top of the partAdvancedDIY difficulty

Special tools this job needs:

  • Engine hoist/crane and load leveler
  • Subframe support fixture
  • Professional OBD2 scan tool (Nissan CONSULT-III+ or equivalent)
🔌 Wiring harness: While the engine may ship with its wiring harness, it is highly recommended to swap your vehicle's original wiring harness onto the replacement engine to ensure 100% pinout and connector compatibility.

Budget for these consumables at install:

  • Engine Oil (0W-20 full synthetic, approx. 4.3 to 4.6 quarts)
  • Oil Filter
  • Coolant (Nissan Blue Long Life Antifreeze/Coolant 50/50)
  • Spark Plugs (Iridium, gap checked to factory spec)
  • Intake manifold gasket set
  • Exhaust manifold gasket
  • Thermostat gasket
  • Serpentine accessory drive belt
  • Timing chain, tensioners, and guides (optional/best practice)

What your vehicle’s computers will need after the swap:

⚠️ Model-dependentprogramming / calibration⚠️ Yesdealer tool needed✅ NoECU/PCM re-marriage

What’s involved: Idle Air Volume Learning (IAVL), Crankshaft Position (CKP) Sensor Relearn, and Immobilizer Re-marriage (if swapping ECU)

Sources differ on programming requirements. Arm 1 states programming is only required for components (IAVL, CKP) and no ECU remarriage is needed if reusing the original ECU. Arm 2 states immobilizer re-marriage is likely required. Cautious value 'model_dependent' selected.

Pro tips for a smooth first start-up — hand them to whoever does the install:

  • Intake Manifold Removal for Spark Plugs: The plastic intake manifold completely covers the ignition coils and spark plugs. Replace these on the engine stand before installing the engine.
  • CVT Torque Converter Alignment: Ensure the torque converter is fully seated in the CVT pump gear before bolting the engine and transmission together to avoid destroying the pump.
  • Fragile Plastic Connectors: Wiring harness connectors for coils, injectors, and VTC solenoids become brittle from heat and break easily.
  • Ground Straps: Ensure all engine-to-chassis ground straps are clean and secure to prevent limp mode and sensor communication codes.

Easy to get right once you know them:

  • Reusing the old rubber intake manifold gasket, which causes vacuum leaks and rough idle.
  • Failing to perform the electronic Idle Air Volume Learning (IAVL) procedure after installation.
  • Not fully seating the torque converter into the CVT splines before tightening bellhousing bolts, cracking the transmission pump.
  • Ordering this 2020-2025 engine for a 2012-2019 Versa (N17 vs N18 generation).
  • Assuming bolt-on accessories like the alternator or A/C compressor are included.

Not issues with the units on this page — the manufacturer documented these for every engine of this family, wherever you buy one. Handy for your installer:

severeManual Transmission Limp Mode2022-2024 Nissan Versa (Manual Transmission)

🔎 Recommended at install: Replace the Valve Timing Control (VTC) unit and update the Engine Control Module (ECM) software.

minorCheck Engine Light with MAF or Idle Codes (P0101 / P0507)2020-2021 Nissan Versa and 2018-2021 Nissan Kicks

🔎 Recommended at install: Test and charge/replace the 12V battery, clear codes, and perform the Idle Air Volume Learning (IAVL) procedure.

moderateIntermittent Rough Idle & Oil Consumption2020-2025 Nissan Kicks and Versa

🔎 Recommended at install: Replace failing ignition coils; high-mileage units may require addressing stuck piston rings.

moderateFuel Tank Insufficient Wall ThicknessCertain 2020 Nissan Versa models

🔎 Recommended at install: Fuel tank replacement.

moderateRod KnockOlder HR16DE engines (noted in 2015)

🔎 Recommended at install: Engine replacement in severe cases.

Researched from factory recalls, TSBs and OEM service data (reference unit 300-10341-4828970). Unit-specific details — mileage, condition, warranty, freight — are covered in the checkout interview.

Policies, in plain English.

Shipping & Handling

  • Ships by LTL freight on a pallet — a real freight truck, not a parcel van
  • Your checkout freight quote covers delivery to your door (liftgate service included for residential addresses)
  • The carrier calls ahead to schedule a delivery window — someone must be present to receive it
  • Typically palletized and picked up within 2–3 business days; transit time depends on distance

120-Day Warranty

This part includes a 120-day warranty.

  • If the part fails within the warranty window, we'll replace it or refund per the coverage terms
  • Coverage is parts-only — installation labor is not included
  • Warranty covers defects — not installation errors, misuse, or damage after installation

Your pre-purchase interview reviews these exact terms with you before anything is charged.

Returns (30 Days)

We accept returns of uninstalled parts within 30 days of delivery for this part.

  • Defective parts: We will replace the part or issue a refund at our discretion
  • Programming: "Needs to be programmed to my vehicle" is not a valid return reason. Many modules require dealer programming — we're happy to help connect you with resources if your dealer says it's not programmable
  • Return shipping: This part ships by freight (LTL) — the part price is refundable per the terms above, but shipping costs are non-refundable and return freight follows the seller's return terms. Your pre-purchase interview walks through the exact numbers before you buy
  • Parts must be returned in original packaging and unmodified condition
  • Poorly packaged returns that arrive damaged will not be credited

Damaged in Shipping?

Freight damage is rare — and you're fully protected when you do two things at delivery:

  • Inspect before you sign — you're allowed time to look the pallet over while the driver waits
  • Write any damage on the delivery receipt before signing — that one line is what makes a freight claim succeed
  • Severe damage? Refuse the delivery — it goes back at no cost to you and we make it right
  • Photograph the pallet before unwrapping; report concealed damage within 24 hours of delivery

We handle the carrier claim — you just help document it. Your pre-purchase interview walks through this checklist too.

Order Cancellation

Cancel before shipment for a full refund. Once the pallet has been built, a preparation charge may apply — and once the freight carrier picks it up, shipping costs are non-refundable and standard return terms apply. Your pre-purchase interview shows the exact numbers before you pay.

Expert Guides

2020-2025 Nissan Versa & Kicks 1.6L HR16DE: Problems, Identification, and Used Replacement

Identify the 3rd-generation 1.6L HR16DE, learn what causes catastrophic failure, and discover when swapping in a used OEM engine is the smartest fix.

Read Full Guide →

Related Trouble Codes (OBD-II)

2 matching guides

If your scan tool is showing one of these trouble codes, this part is a common fix. Each guide explains the code, how to diagnose it, and exactly what to replace.

↑ A single part can trigger multiple related trouble codes. Each guide is vehicle- and code-specific.

Miscellaneous Information

OEM Part Numbers:
Nissan: 101025EE0B

Fits Years: 2020 2021 2022 2023 2024 2025

Why Millions Choose Go-Parts

Your Go-To Place
for auto parts.

In operation since 2007. Trusted by over a million DIYers, mechanics, and body shops across all 50 states.

100%
Interview-Verified Orders

Confirmed Before It Ships

Every freight order is confirmed through a short guided interview — fitment, condition, delivery and warranty terms, e-signed before you're charged.

19
Years of Excellence

Trusted Since 2007

Nearly two decades of shipping parts to professionals & enthusiasts.

120DAY
Yard Warranty

Backed By The Selling Yard

This unit ships with the selling yard's 120-day warranty. Longer plans can be requested during checkout.

What buyers are saying.

★★★★★ 4.9 1,451 verified reviews

Racing Partner Videos

Added to cart · Part