Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.

1.2L Turbo Engine Complete Assembly for 2024 Buick & Chevrolet • Envista, Trax

Out of Stock
Pay-by-bank price
$ 1,082
or $1,115 paying by card
🏦 3% bank discount on your entire order — arranged at checkout

Product Notes Read before buying

Odometer 7,300 miles 🛡 120-day warranty included
⚠ turbo NOT included ✓ runs nice
This is a used engine assembly in good condition. It is a 1.2L 3-cylinder turbo engine (LIH) with dual overhead cams (DOHC), direct injection (DI), and variable valve timing. It produces 137 horsepower and 162 lb-ft of torque. This engine is for vehicles with an automatic transmission. It does not include the turbocharger. You may need to swap your original induction, exhaust, electrical, and fuel system components. Built for the US market; verify your vehicle's 8th VIN digit is 2.

This is a 1.2L turbocharged engine (engine code LIH, 8th VIN digit '2'). To ensure proper installation, the turbocharger assembly and other external components must be transferred from your original engine. This engine fits Front-Wheel Drive (FWD) models only.
Wrenchy the Robot
Not sure? Ask WrenchyYour Parts Assistant.

Voice or type your vehicle details and Wrenchy will confirm fitment in seconds.

Vehicle Fitment Guide

This part fits the following vehicles:

Buick 1 model(tapclick to expand)(tapclick to hide)
Envista 2024 (tapclick to expand)(tapclick to hide)
Swipe left/right to see more info
SubmodelSUB-
MODEL
Body Style Years Engine Attributes
Avenir SUV 2024 L3 1.2L Turbo FWD | Automatic
Avenir Sport Utility Coupe 2024 L3 1.2L Turbo FWD | Automatic
Preferred Sport Utility Coupe 2024 L3 1.2L Turbo FWD | Automatic
Sport Touring SUV 2024 L3 1.2L Turbo FWD | Automatic
Sport Touring Sport Utility Coupe 2024 L3 1.2L Turbo FWD | Automatic
Applies to every configuration above: Hollander: ENVISTA 24 (1.2L, VIN 2, 8th digit, opt LIH); engine_size: include 1.2L; engine_code: include LIH (VIN 2); aspiration: include Turbocharged; fuel_type: include GAS; drive_type: include FWD [inferred]
Chevrolet 1 model(tapclick to expand)(tapclick to hide)
Trax 2024 (tapclick to expand)(tapclick to hide)
Swipe left/right to see more info
SubmodelSUB-
MODEL
Body Style Years Engine Attributes
ACTIV SUV 2024 L3 1.2L Turbo FWD | Automatic
LS SUV 2024 L3 1.2L Turbo FWD | Automatic
LT SUV 2024 L3 1.2L Turbo FWD | Automatic
RS SUV 2024 L3 1.2L Turbo FWD | Automatic
Applies to every configuration above: Hollander: TRAX 24 (1.2L, VIN 2, 8th digit, opt LIH); engine_size: include 1.2L; engine_code: include LIH (VIN 2); aspiration: include Turbocharged; fuel_type: include GAS; drive_type: include FWD [inferred]
Verify before ordering — please confirm your vehicle's year, make, model and sub-model specifications before placing your order. If anything is unclear, our customer service team is available to help.

Know This Engine Before You Buy

The research behind our purchase interview — recalls, bulletins and real install economics for this engine family:

A quick look at your own vehicle makes sure the right engine shows up:

  • Confirm the 8th digit of the VIN is '2'.
  • Confirm the Engine Option Code (RPO) is 'LIH'.
  • Confirm the vehicle is Front-Wheel Drive (FWD).
🔎 Where to look: The broadcast code is printed on a barcode label located on the front engine cover, positioned between the Camshaft Position (CMP) Actuators.

What the install really takes — plan and budget with confidence:

10 to 18 hoursshop labor$1,200 to $3,000typical shop bill, on top of the partExpertDIY difficulty

Special tools this job needs:

  • EN-52458 Variable Camshaft Phaser Holding Tool
  • EN-52455 (or Tool 122920) Camshaft Turning Wrench
  • EN-52476 Flywheel Locking Tool
  • EN-52432 Front Crankshaft Seal Installation Tool
  • EN-955-A / EN-955-10-A Timing belt and chain tensioner fixing pins
🔌 Wiring harness: Ensure harness routing around the oil pressure sensor and connector X125 is secure to prevent wiring issues noted in TSB PIP5932.

Budget for these consumables at install:

  • GM-approved dexos1 Gen 3 Full Synthetic 0W-20 or 5W-30 oil (4.2 quarts)
  • New OEM ACDelco oil filter (PF64 or equivalent)
  • GM-approved Dex-Cool coolant
  • Three (3) new OE-spec spark plugs
  • Intake manifold gasket set
  • Exhaust manifold gasket
  • Turbocharger mounting gasket and oil feed/return line seals
  • Front crankshaft seal
  • GM-approved high-temperature RTV sealant

What your vehicle’s computers will need after the swap:

⚠️ Requiredprogramming / calibration⚠️ Yesdealer tool needed⚠️ YesECU/PCM re-marriage

What’s involved: Crankshaft Position (CKP) Sensor Variation Relearn & ECM Software Update

A GM-compatible diagnostic scan tool (such as GDS2 / Techline Connect / MDI 2) is required to perform the CKP relearn, flash the ECM for Recall A242435780, and re-marry the ECM to the vehicle's immobilizer system.

Pro tips for a smooth first start-up — hand them to whoever does the install:

  • Inspect the wet timing belt through the oil fill port for cracking, fraying, or swelling before installation.
  • Apply a precise 4 mm bead of RTV centered exactly on the oil pan groove; excess RTV will clog the oil pump pickup screen.
  • Replace all turbo oil feed and return line seals to prevent oil starvation and immediate turbo failure.
  • Inspect the transferred mechanical vacuum pump for smooth operation and debris to prevent camshaft or timing belt breakage.

Easy to get right once you know them:

  • Using generic, non-dexos1 Gen 3 certified oil, which chemically degrades the wet timing belt and causes catastrophic engine failure.
  • Reusing single-use Torque-to-Yield (TTY) bolts (cylinder head, harmonic balancer, and camshaft phaser bolts).
  • Neglecting the Crankshaft Position (CKP) Relearn, resulting in severe misfires and rough idling.
  • Failing to thoroughly flush the intercooler/charge air cooler of metal debris and oil from a previous engine failure.

Not issues with the units on this page — the manufacturer documented these for every engine of this family, wherever you buy one. Handy for your installer:

severeVoluntary Emission Recall A242435780: Engine Spark Timing Following Auto Stop Event2024

🔎 Recommended at install: ECM must be reprogrammed with updated software by a dealer.

severeWet Timing Belt (Belt-in-Oil) Degradation2020–present

🔎 Recommended at install: Strict adherence to oil change intervals and the use of GM-certified Dexos1 Gen 3 oil is mandatory.

moderateTSB PIP5932 / 24-NA-021: Oil Pressure Sensor & Solenoid Valve Debris2023–2024

🔎 Recommended at install: Inspect solenoid valve for debris, check harness terminal tension, and perform engine oil pump screening test.

moderateTSB PIP5739: Oil Pan RTV Sealant Placement2020–present

🔎 Recommended at install: Apply a precise 4 mm (0.16 in) bead of RTV centered exactly on the groove of the lower crankcase extension.

minorTSB 20-NA-084: Normal Engine Thudding Noise2020–2024

🔎 Recommended at install: None required; documented as a normal operating characteristic under 2,000 RPM during cold acceleration.

minorSpecial Coverage N232395310: Evaporative Purge Pump Failure2021–2024

🔎 Recommended at install: Replace the evaporative emissions purge pump under GM's special extended warranty program.

moderateCarbon Buildup on Intake Valves2019–present

🔎 Recommended at install: Perform intake valve cleaning to resolve rough idling or misfires.

Researched from factory recalls, TSBs and OEM service data (reference unit 300-10889-5090689). Unit-specific details — mileage, condition, warranty, freight — are covered in the checkout interview.

Policies, in plain English.

Shipping & Handling

  • Ships by LTL freight on a pallet — a real freight truck, not a parcel van
  • Your checkout freight quote covers delivery to your door (liftgate service included for residential addresses)
  • The carrier calls ahead to schedule a delivery window — someone must be present to receive it
  • Typically palletized and picked up within 2–3 business days; transit time depends on distance

120-Day Warranty

This part includes a 120-day warranty.

  • If the part fails within the warranty window, we'll replace it or refund per the coverage terms
  • Coverage is parts-only — installation labor is not included
  • Warranty covers defects — not installation errors, misuse, or damage after installation

Your pre-purchase interview reviews these exact terms with you before anything is charged.

Returns (30 Days)

We accept returns of uninstalled parts within 30 days of delivery for this part.

  • Defective parts: We will replace the part or issue a refund at our discretion
  • Programming: "Needs to be programmed to my vehicle" is not a valid return reason. Many modules require dealer programming — we're happy to help connect you with resources if your dealer says it's not programmable
  • Return shipping: This part ships by freight (LTL) — the part price is refundable per the terms above, but shipping costs are non-refundable and return freight follows the seller's return terms. Your pre-purchase interview walks through the exact numbers before you buy
  • Parts must be returned in original packaging and unmodified condition
  • Poorly packaged returns that arrive damaged will not be credited

Damaged in Shipping?

Freight damage is rare — and you're fully protected when you do two things at delivery:

  • Inspect before you sign — you're allowed time to look the pallet over while the driver waits
  • Write any damage on the delivery receipt before signing — that one line is what makes a freight claim succeed
  • Severe damage? Refuse the delivery — it goes back at no cost to you and we make it right
  • Photograph the pallet before unwrapping; report concealed damage within 24 hours of delivery

We handle the carrier claim — you just help document it. Your pre-purchase interview walks through this checklist too.

Order Cancellation

Cancel before shipment for a full refund. Once the pallet has been built, a preparation charge may apply — and once the freight carrier picks it up, shipping costs are non-refundable and standard return terms apply. Your pre-purchase interview shows the exact numbers before you pay.

Expert Guides

2024 Trax & Envista 1.2L E-Turbo: Problems, Identification, and Used Replacement

Identifying the 1.2L LIH engine, what causes catastrophic failure, and when to swap in a used OEM assembly.

Read Full Guide →

Related Trouble Codes (OBD-II)

2 matching guides

If your scan tool is showing one of these trouble codes, this part is a common fix. Each guide explains the code, how to diagnose it, and exactly what to replace.

↑ A single part can trigger multiple related trouble codes. Each guide is vehicle- and code-specific.

Miscellaneous Information

OEM Part Numbers:
GM: 25206528, 55514764

Fits Years: 2024

Why Millions Choose Go-Parts

Your Go-To Place
for auto parts.

In operation since 2007. Trusted by over a million DIYers, mechanics, and body shops across all 50 states.

100%
Interview-Verified Orders

Confirmed Before It Ships

Every freight order is confirmed through a short guided interview — fitment, condition, delivery and warranty terms, e-signed before you're charged.

19
Years of Excellence

Trusted Since 2007

Nearly two decades of shipping parts to professionals & enthusiasts.

120DAY
Yard Warranty

Backed By The Selling Yard

This unit ships with the selling yard's 120-day warranty. Longer plans can be requested during checkout.

What buyers are saying.

★★★★★ 4.9 1,451 verified reviews

Racing Partner Videos

Added to cart · Part