Volkswagen Golf Wheel Bearing and Hub Assembly Replacement

32mm Bearing ID

32 mm Bearing

30 mm Bearing

Wheel Hub Assembly Axle Nut Torque Spec: 129 ft-lbs / 175Nm

with 32mm Bearing Inside Diameter 32mm Inside Diameter

Grade: Aftermarket Diameter: 30 mm

with 32mm Bearing Inside Diameter 32mm Inside Diameter

Rectangular 4-Bolt Hole Mounting Flange

w/ 30mm bearing Wheel Hub Assembly Axle Nut Torque Spec: Hex head bolt - 133 ft-lbs / 180Nm, turn additional 180 degrees

Triangular 3-Bolt Hole Mounting Flange

without Hardware

Grade: Aftermarket Description: For vehicles with ABS 30mm With OE No. 1K0598611

30mm I.D.

w/ 4 Hole Flange Wheel Hub Assembly Axle Nut Torque Spec: Tighten bolt to 52 ft-lbs / 70Nm, turn additional 90 degrees. Replace bolt after removal.

with ABS Ring 4.4094 in. Bolt Circle Diameter with 1.0787 in. Bearing Inside Diameter without ABS Sensor ; w/ 3 Bolt Mounting Flange

Axle Nut Included

with ABS Ring Flange Not Included 3.720 in. Bolt Circle Diameter without ABS Sensor 30 Inside Diameter

Grade: Aftermarket Description: For vehicles with ABS 32mm With OE No. 1T0598611B

4 BOLT MOUNTING FLANGE; NSK IS THE O.E. MANUFACTURER

w/ 32mm bearing Wheel Hub Assembly Axle Nut Torque Spec: Hex head bolt - 133 ft-lbs /180Nm, turn additional 180 degrees

with ABS Ring Flange Not Included 4.409 in. Bolt Circle Diameter without ABS Sensor

1LV or 1ZB Brakes

FAG Global Number 574076

FAG Global Number 713 6109 800

3 BOLT MOUNTING FLANGE, 80MM; NSK IS THE O.E. MANUFACTURER

Bearing ID is 32mm FAG Global Number 574191.06

w/ 85mm Bearing Diameter

Production: -03/14/2011, w/ 15" Wheels w/ 1ZF Build Code

w/16 In. Wheels

Grade: Aftermarket Description: For vehicles with ABS Brake Code-1ZF

4 Bolt mounting flange FAG Global Number 805657A 4 Hole Mounting Flange

32 Inside Diameter

Includes Hub, Bearing, and Dust Shield Loaded Knuckle

Includes Hub, Bearing, and Dust Shield Loaded Knuckle

Includes Hub, Bearing, and Dust Shield Loaded Knuckle

Includes Hub, Bearing, and Dust Shield Loaded Knuckle

with 280 (mm) Rotors Vehicles With Integral Caliper Bracket Contains Snap Ring, Bearing, Knuckle, Hub Assembly, Backing Plate, Backing Plate Mounting Bolts, and Axle Nut. with 280 (mm) Rotors

with 280 (mm) Rotors Vehicles With Integral Caliper Bracket Contains Snap Ring, Bearing, Knuckle, Hub Assembly, Backing Plate, Backing Plate Mounting Bolts, and Axle Nut. with 280 (mm) Rotors

w/ 80mm Bearing Diameter

FAG Global Number 713 6109 600

4 Bolt Mounting Flange - Non Brake Code 1ZF

4.4094 in. Bolt Circle Diameter with 1.0039 in. Bearing Inside Diameter without ABS Sensor Hardware Not Included with ABS Ring ; w/ 4 Bolt Mounting Flange

FAG Global Number 713 6109 900

32mm Bearing

Grade: Aftermarket Description: For vehicles with ABS Brake Code-1LJ,1ZA,1ZD,1ZE,1ZP

w/ 80mm Bearing Diameter

3 Bolt Mounting Flange - Brake Code 1ZF

w/ 85mm Bearing Diameter

32mm wide bearing

with brake code 1LJ or 1ZA or 1ZD or 1ZE or 1ZP 0.50in knuckle bolt hole size

85mm

80mm

Production: -03/14/2011, w/ 15" Wheels w/ 1ZF Build Code

with 85 (mm) Outside Diameter Bearing(s)