Toyota Tundra Exhaust Muffler Replacement

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

2.5 Offset In/2.5 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

Universal; Oval; 4.25 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25.5 in. Overall Length

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Production: 08/01/2004-

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel

2.50 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Production: 08/2002-, 50 states

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required~Adapters Needed For OEM Exhaust

Production: -07/2002, Exc. California

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Production: 08/01/2004-

2.5 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Duel Inlet/Outlet; Universal; Oval; 4.5 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25 in. Overall Length; T409 Stainless Steel Before July 2008

Universal; Oval; 2.5 in. Inlet/Outlet; 4.25 H in. x 9.75 in. W x 20 in. Muffler L/25 in. Overall L; Offset/Center; Reversible; Stainless Steel

Production: 10/2003-

Production: 08/01/2004-