Nissan Quest Disc Brake Caliper Replacement

1993-2002 Nissan Quest Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97-00544A

$41.54 View part →

1993-2002 Nissan Quest Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97P00544B

$46.22 View part →

1993-2002 Nissan Quest Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97P00544A

$46.22 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.42561

$47.23 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Left (Centric)

Partslink #: 141.42562

$47.23 View part →

2005-2017 Nissan Quest Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-59907R

It was removed from a 4-door van.

Condition: Excellent (A)
Mileage: 157,000 miles

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 3512/4311, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.682, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

Abutment Clips Included: Yes, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 48 03, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.867, Piston Material: Steel, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2004-2009 Nissan Quest Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B2792

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$57.63 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (Cardone)

Partslink #: 19-B3107

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$59.13 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 3512/4311, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.682, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Raybestos)

Partslink #: FRC12389

$61.85 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B2793

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$59.83 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-00569A

Supplied w/ Mounting Bracket

$62.66 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 3519;4312, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.683, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-00569B

Supplied w/ Mounting Bracket

$62.66 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B6036

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$65.47 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.42593

$67.04 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 3519;4312, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.683, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Centric)

Partslink #: 141.42594

$67.04 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B6037

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$68.12 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P00569A

Supplied w/ Mounting Bracket

$68.75 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 48 03, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.867, Piston Material: Steel, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P00569B

Supplied w/ Mounting Bracket

$68.75 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Left (Cardone)

Partslink #: 19-B3106

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$72.17 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-00640B

Supplied w/ Mounting Bracket

$72.33 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-00640A

Supplied w/ Mounting Bracket

$72.33 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.42129

$74.24 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Left (Raybestos)

Partslink #: FRC11637

$72.84 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P00640B

Supplied w/ Mounting Bracket

$78.14 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.42130

$74.24 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L6037

$83.25 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P00640A

Supplied w/ Mounting Bracket

$78.14 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M7x1.0, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: No, Caliper Type: Floating, Casting Number: 4319, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.42, Mounting Hole Thread Diameter: 0.42, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.683, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-00564B

Supplied w/ Mounting Bracket

$83.49 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-6036

Installation Hardware Included with Metal Piston Supplied without Mounting Bracket

$79.24 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (Centric)

Partslink #: 142.42561

$84.11 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-00564A

Supplied w/ Mounting Bracket

$83.49 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3364702

Production: 05/2003-

$94.21 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L6036

$92.60 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-67648

$94.40 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3428871

Production: 05/2003-

$94.21 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (WBR)

Partslink #: W0133-1902248

Production: 05/2003-

$95.12 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-67649

$94.40 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L2793

$95.40 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L2792

$95.40 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-67668

$96.49 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-67669

$96.49 View part →

2004-2009 Nissan Quest Disc Brake Caliper - Rear Right (Cardone)

Partslink #: W0133-1824635

$96.57 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-3402881

$111.96 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-3488310

$110.92 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L3106

$130.01 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L3107

$141.78 View part →

2004-2017 Nissan Quest Disc Brake Caliper - Front Right (Cardone)

Partslink #: W0133-2231386

Production: 05/2003-

$145.50 View part →

2011-2017 Nissan Quest Standard Single-Piston Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 39,000 miles

2011-2017 Nissan Quest Standard Single-Piston Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 56,000 miles

2011-2017 Nissan Quest Standard Single-Piston Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 58,000 miles

2011-2017 Nissan Quest Standard Single-Piston Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 67,000 miles

2011-2017 Nissan Quest Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 39,000 miles

2011-2017 Nissan Quest Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 56,000 miles

2011-2017 Nissan Quest Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 58,000 miles

2011-2017 Nissan Quest Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

It fits 4-door SUV models.

Condition: Excellent (A)
Mileage: 67,000 miles

2004-2009 Nissan Quest Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-59427L

Condition: Excellent (A)
Mileage: 181,000 miles

$79.95 View part →

2011-2017 Nissan Quest Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-50814

Condition: Excellent (A)
Mileage: 19,000 miles

$89.95 View part →

2005-2017 Nissan Quest Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-59908L

Condition: Excellent (A)
Mileage: 157,000 miles