2014-2018 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-61312R

This part comes complete with the bracket.

Condition: Excellent (A)
Mileage: 115,000 miles

$79.95 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-50577L

It was removed from a 4-door van.

Condition: Excellent (A)
Mileage: 156,000 miles

$39.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-10916R

Condition: Excellent (A)
Mileage: 61,000 miles

$105.95 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-61313L

Condition: Excellent (A)
Mileage: 61,000 miles

$89.95 View part →

✓ In Stock

2019-2025 Mazda 3 Front Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-MZ1324

It fits vehicles with a 2.5L engine, automatic transmission, and all-wheel drive.

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-10917L

Condition: Excellent (A)
Mileage: 61,000 miles

$105.95 View part →

✓ In Stock

2020 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-11084

For vehicles with the 2.5L engine and All-Wheel Drive (AWD).

Condition: Excellent (A)
Mileage: 27,000 miles

$139.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-MZ1324

It fits vehicles with a 2.5L engine, automatic transmission, and all-wheel drive.

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2020 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-11084

For vehicles with the 2.5L engine and front-wheel drive.

Condition: Excellent (A)
Mileage: 60,000 miles

$169.95 View part →

✓ In Stock

2019-2025 Mazda 3 Front Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-MZ1324

It fits vehicles with a 2.5L engine, automatic transmission, and all-wheel drive.

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2020 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-11084

Condition: Excellent (A)
Mileage: 37,000 miles

$222.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-MZ1324

It is compatible with vehicles equipped with a 2.5L engine, automatic transmission, and all-wheel drive (AWD).

Condition: Excellent (A)
Mileage: 3,000 miles

$124.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-10915

Condition: Excellent (A)
Mileage: 12,000 miles

$179.95 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.25, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 814, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.24, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Right (Cardone)

Partslink #: 19-B2943E

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$63.14 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Screw Thread Size: M8x1.25, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Powder Coated, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 813, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.24, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2004 Mazda 3 Disc Brake Caliper - Front Left (Cardone)

Partslink #: 19-P2942

Installation Hardware Included with Metal Piston Obsolete Supplied with Mounting Bracket

$63.77 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.45085

$66.79 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: K1900, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Thread size: M14x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.124, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (Cardone)

Partslink #: 19-B7158

Installation Hardware Included Japan Built with Phenolic Piston Supplied with Mounting Bracket

$65.29 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.45121

Made in Mexico

$66.95 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.25, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 736 & 278;827, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.75, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.24, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2004 Mazda 3 Disc Brake Caliper - Front Left (Cardone)

Partslink #: 19-B2942

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$70.61 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: K1900, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Thread size: M14x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.124, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (Cardone)

Partslink #: 19-B7159

Installation Hardware Included Japan Built with Phenolic Piston Supplied with Mounting Bracket

$67.01 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-09351A

Supplied w/ Mounting Bracket

$71.13 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-09351B

Supplied w/ Mounting Bracket

$71.13 View part →

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01190A

Supplied w/ Mounting Bracket

$71.66 View part →

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01190B

Supplied w/ Mounting Bracket

$71.66 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 699 Ate 15, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B2954

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$72.08 View part →

✓ In Stock

2017-2018 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P02011A

Supplied w/ Mounting Bracket Supplied wo/ Parking Brake Motor

$72.31 View part →

✓ In Stock

2004-2007 Mazda 3 Disc Brake Caliper - Front Left (Raybestos)

Partslink #: FRC11805

$72.24 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01199B

Supplied w/ Mounting Bracket Mfd in Japan

$73.63 View part →

✓ In Stock

2017-2018 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P02011B

Supplied w/ Mounting Bracket Supplied wo/ Parking Brake Motor

$72.31 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01198B

Supplied w/ Mounting Bracket Mfd in Japan

$73.69 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01199A

Supplied w/ Mounting Bracket Mfd in Japan

$73.63 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P01199B

Supplied w/ Mounting Bracket Mfd in Japan

$75.48 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01198A

Supplied w/ Mounting Bracket Mfd in Japan

$73.69 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-02004A

Supplied w/ Mounting Bracket Mfd in Mexico

$76.27 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-02004B

Supplied w/ Mounting Bracket Mfd in Mexico

$76.27 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-02003B

Supplied w/ Mounting Bracket Mfd in Mexico

$76.27 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-02003A

Supplied w/ Mounting Bracket Mfd in Mexico

$76.27 View part →

✓ In Stock

Installation Hardware Included Mexico Built with Metal Piston Supplied with Mounting Bracket

$77.68 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P01198A

Supplied w/ Mounting Bracket Mfd in Japan

$77.95 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P01198B

Supplied w/ Mounting Bracket Mfd in Japan

$77.95 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (Centric)

Partslink #: 141.45536

$78.07 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.45535

$78.07 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01168A

Supplied w/ Mounting Bracket

$79.45 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01168B

Supplied w/ Mounting Bracket

$79.45 View part →

✓ In Stock

2006-2013 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01189A

Supplied w/ Mounting Bracket

$80.20 View part →

✓ In Stock

2006-2013 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01189B

Supplied w/ Mounting Bracket

$80.20 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P02003A

Supplied w/ Mounting Bracket Mfd in Mexico

$82.04 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 698 Ate,280, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B6285A

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$80.94 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 698 Ate,280, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B6284A

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$82.13 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P02003B

Supplied w/ Mounting Bracket Mfd in Mexico

$82.04 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P02004B

Supplied w/ Mounting Bracket Mfd in Mexico

$83.13 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P02004A

Supplied w/ Mounting Bracket Mfd in Mexico

$83.13 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-61311L

It is compatible with vehicles equipped with a 2.0L engine, automatic transmission, and front-wheel drive (FWD).

Condition: Excellent (A)
Mileage: 292,000 miles

$83.95 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 699 Ate 15, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B2955

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$84.81 View part →

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Left (Raybestos)

Partslink #: FRC12651

$84.27 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P01168B

Supplied w/ Mounting Bracket

$85.24 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 54, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.415, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B7155

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$84.28 View part →

✓ In Stock

2006-2013 Mazda 3 Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P01189B

Supplied w/ Mounting Bracket

$85.98 View part →

✓ In Stock

2004-2005 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P01168A

Supplied w/ Mounting Bracket

$85.24 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.45577

Made in Mexico

$86.68 View part →

✓ In Stock

2006-2013 Mazda 3 Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P01189A

Supplied w/ Mounting Bracket

$85.98 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P09342B

Supplied w/ Mounting Bracket

$89.83 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Rear Left (Centric)

Partslink #: 141.45578

Made in Mexico

$86.68 View part →

✓ In Stock

2004-2006 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-01186B

Supplied w/ Mounting Bracket w/ 280mm Disc

$93.71 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P09342A

Supplied w/ Mounting Bracket

$89.83 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-02000A

Supplied w/ Mounting Bracket Mfd in Japan

$94.98 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 698 Ate, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2004-2008 Mazda 3 Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B2954A

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$91.79 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 699 Ate 15,271, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2010-2013 Mazda 3 Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B6285

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$94.99 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 699 Ate 15,271, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.492, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2010-2013 Mazda 3 Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B6284

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$93.42 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P01169B

Supplied w/ Mounting Bracket

$95.06 View part →

✓ In Stock

2004-2006 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-01186A

Supplied w/ Mounting Bracket w/ 280mm Disc

$93.71 View part →

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L2943B

$96.04 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-02000B

Supplied w/ Mounting Bracket Mfd in Japan

$94.98 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-09342B

Supplied w/ Mounting Bracket

$100.46 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P01169A

Supplied w/ Mounting Bracket

$95.06 View part →

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L2943E

$100.87 View part →

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L2942B

$96.04 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-01169B

Supplied w/ Mounting Bracket

$102.24 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (Centric)

Partslink #: 142.45536

$98.22 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Front Right (Pagid)

Partslink #: 355791501

$102.80 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-09342A

Supplied w/ Mounting Bracket

$100.46 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P02000A

Supplied w/ Mounting Bracket Mfd in Japan

$104.33 View part →

✓ In Stock

2008-2013 Mazda 3 Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L2942E

$100.87 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-10914R

Condition: Excellent (A)
Mileage: 54,000 miles

$105.95 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-01169A

Supplied w/ Mounting Bracket

$102.24 View part →

✓ In Stock

2004-2008 Mazda 3 Disc Brake Caliper - Rear Right (Raybestos)

Partslink #: RC12840C

$107.79 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Front Left (Pagid)

Partslink #: 355791491

$102.80 View part →

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L6285

From 02/27/2008

$112.90 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P02000B

Supplied w/ Mounting Bracket Mfd in Japan

$104.33 View part →

✓ In Stock

2008-2009 Mazda 3 Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-80094

$117.01 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-10915L

Condition: Excellent (A)
Mileage: 54,000 miles

$105.95 View part →

✓ In Stock

2004-2007 Mazda 3 Disc Brake Caliper - Front Right (Raybestos)

Partslink #: FRC11806N

$118.51 View part →

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L6284

From 02/27/2008

$112.90 View part →

✓ In Stock

2006-2007 Mazda 3 Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-80086

$119.06 View part →

✓ In Stock

2008-2009 Mazda 3 Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-80095

$117.01 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3451829

$123.92 View part →

✓ In Stock

2006-2007 Mazda 3 Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-80087

$119.06 View part →

✓ In Stock

2004-2007 Mazda 3 Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L2943

$124.59 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3344771

$123.92 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-MZ1A24

For vehicles with the 2.5L engine, automatic transmission, and All-Wheel Drive (AWD).

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-MZ1A24

For vehicles with the 2.5L engine, automatic transmission, and All-Wheel Drive (AWD).

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-MZ1A24

For vehicles with the 2.5L engine, automatic transmission, and All-Wheel Drive (AWD).

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2019-2025 Mazda 3 Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-MZ1A24

For vehicles with the 2.5L engine, automatic transmission, and All-Wheel Drive (AWD).

Condition: Excellent (A)

$124.95 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-80626

$128.19 View part →

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L2954

$126.90 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-80102

Japan Build

$133.01 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-80627

$128.19 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-80650

$137.83 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L2954A

$128.73 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L2955A

$140.37 View part →

✓ In Stock

2004-2007 Mazda 3 Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L2942

$131.94 View part →

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L2955

$142.91 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-4088648

w/ Mexico Built Vehicle

$135.73 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3501788

w/ Japan Built Vehicle

$147.17 View part →

✓ In Stock

2019-2024 Mazda 3 Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-10925L

It fits front-wheel drive vehicles with a 2.5L engine and automatic transmission.

Condition: Excellent (A)
Mileage: 36,000 miles

$139.95 View part →

✓ In Stock

2019-2024 Mazda 3 Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-10924R

Condition: Excellent (A)
Mileage: 33,000 miles

$149.95 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-80663

Japan Build

$150.51 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-80662

Manual Parking Brake Japan Build

$150.51 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3398082

w/ Japan Built Vehicle

$152.40 View part →

✓ In Stock

2004-2008 Mazda 3 Disc Brake Caliper - Rear Right (Raybestos)

Partslink #: FRC12840N

$154.91 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-80665

Mexico Build

$155.19 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-80664

Mexico Build

$155.19 View part →

✓ In Stock

2004-2008 Mazda 3 Disc Brake Caliper - Rear Left (Pagid)

Partslink #: 355782671

$155.30 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-4088663

w/ Mexico Built Vehicle

$172.64 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Anodized, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 1.49, Piston Material: Steel, Piston Quantity: 1, Product Condition: New, Rust Resistant Coating: Yes

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 2C-2954

Installation Hardware Included with Metal Piston Obsolete Supplied with Mounting Bracket

$160.10 View part →

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Right (Raybestos)

Partslink #: FRC12652N

$173.13 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-4088646

w/ Mexico Built Vehicle

$172.64 View part →

✓ In Stock

2004-2007 Mazda 3 Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L2943C

$179.64 View part →

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Left (Raybestos)

Partslink #: FRC12651N

$173.13 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper - Front Right (Cardone)

Partslink #: W0133-1892948

$188.48 View part →

✓ In Stock

2009-2013 Mazda 3 Disc Brake Caliper - Rear Left (Raybestos)

Partslink #: FRC12653N

Replaces FRC12805N

$173.13 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-3391726

$200.85 View part →

✓ In Stock

2004-2007 Mazda 3 Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L2942C

$179.64 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Anodized, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 1.49, Piston Material: Steel, Piston Quantity: 1, Product Condition: New, Rust Resistant Coating: Yes

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 2C-2955

Installation Hardware Included with Metal Piston Obsolete Supplied with Mounting Bracket

$201.30 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L7158

Except Mexico Built

$210.62 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L7159

Except Mexico Built

$210.62 View part →

✓ In Stock

2014-2016 Mazda 3 Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-3361681

$214.91 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper with Bracket - Front, Right (Passenger) (Used OEM)

Partslink #: 536-50576R

It was removed from a 4-door van.

Condition: Excellent (A)
Mileage: 130,000 miles

$39.95 View part →

✓ In Stock

2004-2013 Mazda 3 Disc Brake Caliper with Bracket - Front, Right (Passenger) (Used OEM)

Partslink #: 536-50576R

For 4-door van models.

Condition: Excellent (A)
Mileage: 156,000 miles

$39.95 View part →

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-59639R

Condition: Excellent (A)
Mileage: 82,000 miles

$79.95 View part →

✓ In Stock

2004-2009 Mazda 3 Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-59640L

Condition: Excellent (A)
Mileage: 82,000 miles

$79.95 View part →

✓ In Stock

2010-2013 Mazda 3 Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-51051L

Condition: Excellent (A)
Mileage: 52,000 miles

$79.95 View part →

✓ In Stock

2010-2013 Mazda 3 Disc Brake Caliper with Bracket - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-51050R

Condition: Excellent (A)
Mileage: 52,000 miles

$79.95 View part →

✓ In Stock

2014-2018 Mazda 3 Disc Brake Caliper Assembly - Front, Right (Passenger) (Used OEM)

Partslink #: 536-61310R

It is compatible with front-wheel drive vehicles equipped with a 2.0L engine and automatic transmission.

Condition: Excellent (A)
Mileage: 292,000 miles

$83.95 View part →