Jeep Wrangler JK Drive Axle Shaft Replacement

Dana 44; Repl. Axle; 32.54 in. Length; 32 Spline; Brake Pilot Surface 2.828 in.; Bearing 1.565 in.; RH[Passenger Side]

Mileage: 73,800 miles

Mileage: 133,700 miles

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Driver; Tork Axles Designed To Work w/Aftermarket Differentials

Dana 30; 30 Spline; Driver Uses Large 5-7166X U-Joints

Dana 30; 30 Spline; U-Joint; Passenger Uses Large 5-7166X U-Joints

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Passenger; Tork Axles Designed To Work w/Aftermarket Differentials

Uni-Ball For 3-Links; Fits JL/JT Aftermarket Diffs [Only] And All JK/TJ/LJ/XJ/MJ/ZJ Stock And Aftermarket Diffs

with 32 Splines with 5-760X Universal Joint - Required 6.33in Length Requires 5-760X U-Joint with 1310 Series Universal Joint - Required with Dana 30 Axle

Dana 44;Chromoly Inner 30 Spline; Stock Length; Accepts 5-760X U-Joint; RH[Passenger Side]

Incl. Retainer/Bearing/Seal And Ring; w/Tru-Lok Differential; For Use w/Dana 44

w/Tru-Lok Differential; For Use w/Dana 44

Does Include Bearing, Seal, or Hardware w/Sales Code DSE (Tru-Lok Differential Front and Rear Axle) or w/Sales Code DSH (Locker Rear Axle)

18.8 in.; 30 Spline; Left Hand Side Dana 30; Aftermarket 30 spline upgrade; Uses 1350 Serier Joint

with Axle Shaft Assembly with Axle Bearing and Seal with Dana Super 44 Rear Axle with 31.18in Length with 31.18in Shaft Length with 32 Splines With Electronic Locking Differential

34.5 in.; 30 Spline Right Dana 30; Aftermarket 30 spline upgrade; Uses 1350 Serier Joint

with 30 Splines with 5-7166X U-Joint(s) Aftermarket Design with 1350 Series Universal Joint - Required with 19.10in Axle with Dana 44 or Ultimate Dana 44 Axle(s) with Locking Differential

Does Include Bearing, Seal, or Hardware w/Sales Code DSA (Anti Spin Differential Rear Axle) or w/Sales Code DS8 (Conventional Differential Rear Axle)

Dana 44 Rear; 31 1/4 in. Long Dana 44. JK Rubicon; Left Rear Axle Kit; 4340 Chromoly; 31 1/4 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

with 30 Splines with 5-7166X U-Joint(s) 34.19in Length Aftermarket Design with 1350 Series Universal Joint - Required with Dana 44 or Ultimate Dana 44 Axle(s) with Locking Differential

with Ultimate Dana 60 Axle

Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset Dana 44; Aftermarket 35 Spline Axle; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bearing Offset

with Ultimate Dana 60 Axle

with 33.57in Length with 5-7166X U-Joint(s) with Locking Differential 1350 Series OE Design with 30 Spline Teeth with Dana 1350 Series Drive Shaft with Dana 44 or Ultimate Dana 44 Axle(s)

with 33.57in Length with 5-7166X U-Joint(s) with Locking Differential 1350 Series OE Design with 30 Spline Teeth with Dana 1350 Series Drive Shaft with Dana 44 or Ultimate Dana 44 Axle(s)

with 5-7166X U-Joint(s) with Dana Model Super 30 Axle with 1350 Series Universal Joint - Required with 18.80in Axle with 27 Splines

Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

with Ultimate Dana 60 Axle

with Dana Model Super 30 Axle with 1310 Series Universal Joint - Required with 18.80in Axle with 27 Splines

with Dana Super 44 Rear Axle With Electronic Locking Differential with 32 Splines with 32.54in Length with Axle Shaft Assembly with Axle Bearing and Seal

New Design with Dana Super 30 Front Axle with Upgraded 1350 Series Design

with Ultimate Dana 60 Axle

with Dana 44 Axle

New Design with Dana Super 30 Front Axle with Upgraded 1350 Series Design

with 5-7166X U-Joint(s) with Dana Model Super 30 Axle 34.50in Length with 1350 Series Universal Joint - Required with 27 Splines

with 27 Splines with 5-760X Universal Joint - Required 34.50in Length Requires 5-760X U-Joint with 1310 Series Universal Joint - Required with Dana Model Super 30 Axle

with Dana 44 Axle

with 5-7166X U-Joint(s) with Dana 44 or Ultimate Dana 44 Axle(s) 6.33in Length with 1350 Series Universal Joint - Required with 32 Splines with Dana Model Super 30 Axle

Dana 30; Spline Axle; Placer; Driver

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Driver; Placer

Dana 30; Spline Axle; Placer; Passenger

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Passenger; Placer

Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly

Incl. Retainer/Bearing/Seal And Ring; w/Standard And Trac-Lok Differential; For Use w/Dana 44

4340 Chromoly; 32 in. Long; 35 Spline; 5 x 4.5 in. 5 x 5.0 in. And 5 x 5.5 in. Bolt Patterns 5 x 4.5 in. 5 x 5.0 in. And 5 x 5.5 in. Bolt Patterns~Dana 44 Aftermarket 35 Spline Rear Axle; 4340 Chromoly; 32 in. Long~Includes Axle Bearing Seal Retainer Studs And ABS Ring

with Standard Differential with 226mm Axle with 31.885in Shaft Length with Axle Shaft Assembly with Axle Bearing and Seal

Dana 44 w/o E-Locker

Dana 35; 29 Spline; 32.3 in. Long