Jeep Wrangler Electronic Control Module Replacement

This part is the main ECU. The module may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 107,200 miles

It fits 2-door models with 4x4 drive. This part is for vehicles with the automatic engine start-stop (ESS) system and a 12-volt non-eTorque system. This module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 22,500 miles

Condition: Excellent (A)
Mileage: 192,000 miles

For 2-door vehicles with 4-wheel drive, the 4.2L engine, and a 5-speed manual transmission. This part is a combustion controller for vehicles with Federal emissions.

Condition: Excellent (A)
Mileage: 113,900 miles

This powertrain control module is for vehicles with the 3.6L engine and the 48-volt eTorque system. It is the new style for vehicles with 6-lug wheels. The module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 63,000 miles

Please verify that your part identification number matches. Built for vehicles with the 3.6L engine.

Condition: Excellent (A)
Mileage: 110,000 miles

It is designed for 12-volt systems without eTorque. This part fits vehicles with option code NZB (GPEC 2A engine controller). The module may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 49,000 miles

It is for vehicles with the automatic engine start-stop (ESS) system and the 12-volt non-eTorque system. This module may need to be reprogrammed to your vehicle to work.

Condition: Good (B)
Mileage: 134,000 miles

It was removed from a vehicle that ran well. It fits vehicles with the 2.0L engine (option code EC3) and the 48-volt eTorque system. This module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 76,000 miles

It is designed for left-hand drive vehicles and is located in the engine compartment. This part is for vehicles equipped with the 48-volt eTorque system. The module may need to be reprogrammed to work with your vehicle.

Condition: Good (B)
Mileage: 110,000 miles

It is a powertrain control module designed for vehicles with the automatic engine start-stop (ESS) system. This part may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 78,000 miles

This powertrain control module is for vehicles with a 3.6L engine and the automatic engine start-stop (ESS) system. It features the GPEC (Global Powertrain Engine Controller) 5 engine controller (option code NZE). This module may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 52,000 miles

It fits vehicles with the 12-volt system (non-eTorque) and option code NZB (GPEC 2A engine controller). This part is for vehicles with automatic engine start-stop (ESS). This module may need to be reprogrammed to your vehicle to work.

Condition: Good (B)
Mileage: 92,000 miles

This part is for plug-in hybrid models. This is a powertrain control module that may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 59,000 miles

For vehicles with the 3.6L engine, 5-speed automatic transmission, and 4-wheel drive. Built for 4-door vehicles. This is an engine control module (ECM) for powertrain control.

Condition: Excellent (A)
Mileage: 100,000 miles

It fits vehicles with the 4.0L 6-cylinder engine and manual transmission. This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 111,000 miles

Programming may be required. This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 99,000 miles

This part does not fit Rubicon models. This powertrain control module may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 142,000 miles

This powertrain control module is for vehicles with the 3.7L engine and automatic transmission. WARNING: This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 197,000 miles

This module may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 153,000 miles

It is for vehicles with a 3.7L engine and automatic transmission. This part is for vehicles without flex fuel capability. This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 263,000 miles

This part is located in the engine compartment.

Condition: Excellent (A)
Mileage: 75,000 miles

Condition: Excellent (A)
Mileage: 188,700 miles

It is for vehicles with federal emissions.

Condition: Excellent (A)
Mileage: 101,000 miles

This engine control module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 127,000 miles

This part may be VIN specific and may not be reprogrammable. It fits vehicles excluding the Rubicon trim.

Condition: Excellent (A)
Mileage: 180,700 miles

Condition: Excellent (A)
Mileage: 182,400 miles

It fits 2-door models with federal emissions.

Condition: Excellent (A)
Mileage: 120,300 miles

This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 99,000 miles

WARNING: This module may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)

This part is also known as a powertrain control module. This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 132,000 miles

This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 102,000 miles

This part is located on the right side of the firewall. This part may be VIN specific and may not be reprogrammable. This part does not fit Rubicon models.

Condition: Excellent (A)
Mileage: 98,000 miles

This part may also control transmission functions. This part may be VIN specific and may not be reprogrammable. This part does not fit Rubicon models.

Condition: Excellent (A)
Mileage: 45,200 miles

This part may be VIN specific and may not be reprogrammable.

Condition: Excellent (A)
Mileage: 121,000 miles