Jeep Wagoneer Drive Axle Shaft Replacement

This is a rear CV axle shaft.

Mileage: 27,000 miles

Mileage: 23,000 miles

with Non ABS with OE Version 1.188in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

For four-wheel drive (4x4) vehicles. This part fits both sides of the vehicle.

Mileage: 74,000 miles

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and an 8-speed automatic transmission. This part fits both the left and right sides.

Mileage: 85,000 miles

It fits four-wheel drive (4x4) vehicles. This part fits both sides of the vehicle. It is for vehicles without option code SFE.

Mileage: 74,000 miles

w/Cardan U-Joint

with Dana 35 Axle

with Dana 35 Axle

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

with Dana 30 Axle with Non ABS

Dana 44 Axle Does Include Bearing, Seal, or Hardware

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

Flanged; 27.75 in. Length; For Use w/AMC 20

with Dana 44 Axle with Dana 44 Axle(s)

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Flanged; 29.25 in. Length; For Use w/AMC 20

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

AMC 20; Dana 44; 30 Spline; 15.80 in. Length Dana 44; Standard Rotation; 30 Spline; 15.80 in. Length

Dana Model 44 Axle

Dana 44 Axle Does Include Bearing, Seal, or Hardware

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 32.95in Axle

Dana 44; AMC 20; 30 Spline; 14.78 in. Length Dana 44; Standard Rotation; 30 Spline; 14.78 in. Length

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 32.12in Axle

Dana 35 Axle Does Include Bearing, Seal, or Hardware

w/Cardan U-Joint

Dana 44; AMC 20; 30 Spline; 14.61 in. Length Dana 44; Standard Rotation; 30 Spline; 14.61 in. Length

Dana 44; AMC 20; 30 Spline; 33.19 in. Length Dana 44; Standard Rotation; 30 Spline; 33.19 in. Length

Dana 44; 30 Spline; 35.25 in. Length; Replacement Dana 44; Standard Rotation; 30 Spline; 35.25 in. Length; 4340 Chromoly Upgrade~Dana 44; Standard Rotation; 30 Spline; 35.25 in. Length; Replacement

AMC 20; Dana 44; 30 Spline; 32.12 in. Length Dana 44; Standard Rotation; 30 Spline; 32.12 in. Length

Dana Model 44 Axle

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 14.78in Axle with 30 Spline Teeth

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 15.80in Axle with 30 Spline Teeth

with Non ABS Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Axle

Exc.Disconnecting Axle, w/Cardan U-Joint

This is the inner axle shaft.

Mileage: 203,200 miles

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and automatic transmission. This part fits both sides of the vehicle.

Mileage: 82,300 miles

For all-wheel drive vehicles equipped with the 3.0L engine and automatic transmission.

Fits the rear of the vehicle with a 6.4L engine, automatic transmission, and 4-wheel drive (4X4).

Built for vehicles with the 3.0L engine, automatic transmission, and four-wheel drive (4x4).

Mileage: 85,000 miles

Mileage: 96,000 miles

with 2 Snap Ring Grooves at Shaft End with 9.72in Shaft Length with Dana 44 Front Axle

Mileage: 27,000 miles

Mileage: 34,000 miles

It fits the front of the vehicle.

Mileage: 28,200 miles

Mileage: 28,200 miles

Requires 5-760X with 9.94in Shaft Length with Dana 44 & GM 8.5 Axles

1.062in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

Mileage: 2,000 miles

Requires 5-760X with 9.72in Shaft Length

Mileage: 2,000 miles

Mileage: 2,000 miles

Mileage: 1,000 miles