Jeep Liberty Drive Axle Shaft Replacement

Mileage: 81,500 miles

Built for 4WD vehicles with a 3.70 gear ratio. This is the outer shaft.

Mileage: 158,000 miles

This is an outer axle shaft.

Mileage: 172,000 miles

This is the outer front axle shaft.

Mileage: 186,000 miles

This is the inner shaft.

Mileage: 172,000 miles

For vehicles with the 3.7L engine, 4-speed automatic transmission, and 4-wheel drive. Fits 4-door models.

Mileage: 180,800 miles

For vehicles with the 3.7L engine, 4-speed automatic transmission, and rear-wheel drive. Fits 4-door models.

Mileage: 179,200 miles

This is the inner axle shaft.

Mileage: 113,000 miles

This part is for the outer position.

Mileage: 133,000 miles

16-7/8 in. Long; For Use w/Dana 30

This part has a 43.3mm (1.70 inch) outer bearing shaft diameter. It is for vehicles equipped with a Chrysler 8-1/4 inch rear axle.

Mileage: 194,200 miles

It fits vehicles with a Chrysler 8-1/4 inch rear axle and a 43.3mm (1.70 inch) outer bearing shaft diameter.

Mileage: 155,700 miles

Fits vehicles with the Chrysler 8-1/4 inch rear axle.

For vehicles with the Chrysler 8-1/4 inch rear axle.

Mileage: 105,700 miles

Mileage: 148,000 miles

25-1/4 in. Long; For Use w/8.25 in. 10 Bolt Axle

25-3/4 in. Long

Left Hand Drive; For Use w/Dana 30

Left Hand Drive; For Use w/Dana 30

Does Include Bearing, Seal, or Hardware

27 Spline; 31.5 in. Length; For Use w/Dana 35

8.25 in. 10 Bolt; 29 Spline; 30 7/8 in. Length Chrysler 8.25 in.; 29 Spline; 30 7/8 in. Length

27 Splines; 30 in. Length; For Use w/Dana 35

For Use w/8.25 in. 10 Bolt Axle

For Chrysler 8.25" (10 Bolt); 30.88" Overall Length; 5 x 4.5 Lug Pattern; 29 Spline

8.25 in./ 213 mm; 31-1/2 in. Long; 1.705 in. Bearing Journal

8.25 in. Ring Gear; 31.5 in. Long