Jeep Grand Wagoneer Drive Axle Shaft Replacement

This is a rear CV axle shaft.

Mileage: 27,000 miles

Mileage: 23,000 miles

with OE Version 1.188in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

For four-wheel drive (4x4) vehicles. This part fits both sides of the vehicle.

Mileage: 74,000 miles

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and an 8-speed automatic transmission. This part fits both the left and right sides.

Mileage: 85,000 miles

It fits four-wheel drive (4x4) vehicles. This part fits both sides of the vehicle. It is for vehicles without option code SFE.

Mileage: 74,000 miles

It fits the front of the vehicle.

Mileage: 28,200 miles

Mileage: 28,200 miles

ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle

ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle

with Dana 30 Axle with Reverse Rotation

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

with Dana 30 Axle with Reverse Rotation

Flanged; 29.25 in. Length; For Use w/AMC 20

Flanged; 27.75 in. Length; For Use w/AMC 20

with ABS Ring with Dana 35 Axle with 2.678in O.D. ABS Ring with 29.04in Shaft Length with 54 Teeth

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

with Dana 30 Disconnect Axle

with 54 Teeth with ABS Ring Replaces OE Part Number(s) 04713193 with 2.678in O.D. ABS Ring with 30.54in Shaft Length with Dana 35 Axle

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Disconnect Axle

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and automatic transmission. This part fits both sides of the vehicle.

Mileage: 82,300 miles

For all-wheel drive vehicles equipped with the 3.0L engine and automatic transmission.

Fits the rear of the vehicle with a 6.4L engine, automatic transmission, and 4-wheel drive (4X4).

Built for vehicles with the 3.0L engine, automatic transmission, and four-wheel drive (4x4).

Mileage: 85,000 miles

Mileage: 85,000 miles

with 2 Snap Ring Grooves at Shaft End with 9.72in Shaft Length with Dana 44 Front Axle

Mileage: 27,000 miles

Mileage: 34,000 miles

1.062in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

Mileage: 2,000 miles

Mileage: 2,000 miles

Mileage: 2,000 miles