Jeep Grand Cherokee Drive Axle Shaft Replacement

Mileage: 96,600 miles

For 4WD vehicles with the 3.6L engine and a single-speed transfer case. Fits vehicles with a 195mm (7.68 inch) ring gear. This part includes both sides.

Mileage: 63,000 miles

For 4WD vehicles with the 3.6L engine and a single speed transfer case. Fits vehicles with a 195mm (7.68 inch) ring gear. This part includes both sides.

Mileage: 63,000 miles

Mileage: 55,600 miles

Mileage: 55,600 miles

Mileage: 112,400 miles

For 4WD vehicles with the 3.6L engine. Also fits vehicles with the 5.7L engine and 2-speed transfer case. This part fits both sides of the vehicle.

Mileage: 90,000 miles

For 4WD vehicles with the 3.6L engine. Fits vehicles equipped with a 2-speed transfer case and the 5.7L engine. This part fits both sides of the vehicle.

Mileage: 90,000 miles

Mileage: 41,100 miles

It fits vehicles with the 3.6L engine. It is compatible with both 2-wheel drive (4x2) and 4-wheel drive (4x4) models. This part is for vehicles with a conventional, non-locking differential. This part fits both sides of the vehicle.

Mileage: 82,000 miles

Mileage: 80,000 miles

Mileage: 41,100 miles

Mileage: 32,200 miles

Mileage: 64,000 miles

Mileage: 116,000 miles

Mileage: 32,200 miles

Mileage: 80,000 miles

This is a front axle shaft assembly.

Mileage: 119,700 miles

This part is for vehicles without an electronic limited slip differential.

Mileage: 107,000 miles

Mileage: 123,200 miles

Mileage: 177,800 miles

It fits 4x4 vehicles with a 5.7L engine and automatic transmission.

Mileage: 44,000 miles

Mileage: 132,900 miles

It fits 4x4 vehicles with a 5.7L engine and automatic transmission. It is for the outer axle shaft.

Mileage: 44,000 miles

Mileage: 56,000 miles

Mileage: 150,000 miles

This is the front axle outer shaft.

Mileage: 155,000 miles

This is the outer axle shaft.

Mileage: 144,000 miles

Mileage: 150,000 miles

Mileage: 112,000 miles

Mileage: 64,000 miles

This is the front axle shaft assembly.

Mileage: 77,200 miles

For vehicles with a 5.7L engine and a 2-speed transfer case. This part fits both sides.

Mileage: 61,400 miles

For vehicles with a 5.7L engine and a 2-speed transfer case. This part fits both sides.

Mileage: 75,200 miles

This is a rear axle shaft assembly. It fits vehicles with the 3.6L engine and either 4x2 or 4x4 drive systems. It is for vehicles with a conventional, non-locking differential.

Mileage: 85,300 miles

This axle shaft fits vehicles with a 3.6L engine. It is compatible with both 4x2 and 4x4 wheel drive systems. It is designed for vehicles with a conventional, non-locking differential. This part fits both sides of the vehicle.

Mileage: 83,600 miles

It fits vehicles with a 195mm (7.68 inch) ring gear and a 3.6L engine with a single-speed transfer case. This part fits both sides of the vehicle.

Mileage: 67,500 miles

This is a rear axle shaft assembly. It fits vehicles with a 195mm (7.68 inch) ring gear and a 3.6L engine with a single-speed transfer case.

Mileage: 67,500 miles

Mileage: 49,000 miles

Mileage: 161,000 miles

For vehicles with a CV axle shaft.

Mileage: 69,000 miles

Mileage: 150,000 miles

Mileage: 49,000 miles

Mileage: 88,000 miles

For vehicles with the 6.2L engine and All-Wheel Drive (AWD).

Mileage: 20,000 miles

For vehicles with rear-wheel drive, the 3.6L engine, and a 5-speed automatic transmission. This part fits 4-door models.

Mileage: 132,000 miles

For vehicles with rear-wheel drive, the 3.6L engine, and a 5-speed automatic transmission. This part fits 4-door models.

Mileage: 132,000 miles

For rear-wheel drive vehicles with the 5.7L engine and 6-speed automatic transmission. This part fits both sides of the vehicle.

Mileage: 107,900 miles

For vehicles with the 5.7L engine, rear-wheel drive, and 6-speed automatic transmission. This part fits both the right and left sides.

Mileage: 107,900 miles

Mileage: 131,000 miles

This part fits the rear of the vehicle.

Mileage: 23,000 miles

Mileage: 35,000 miles

It is for a 4-wheel drive vehicle with a 5.7L engine and an automatic transmission.

Mileage: 44,000 miles

It is for vehicles without an electronic limited slip differential.

Mileage: 83,000 miles

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and a 5-speed automatic transmission. Fits vehicles equipped with an electronic limited slip differential.

Mileage: 226,400 miles

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and automatic transmission. Fits vehicles equipped with an electronic limited slip differential.

Mileage: 212,700 miles

with 6.11in Shaft Length with Dana 30 Axle 1.188in Bearing Cap Diameter ABS Ring not Included with OE Version

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and a 5-speed automatic transmission. Fits vehicles with a 2-speed transfer case (model MP3023).

Mileage: 139,900 miles

w/Standard Differential; For Use w/8.25 in. 10 Bolt Axle

w/Standard Differential; For Use w/8.25 in. 10 Bolt Axle

with Dana Model 44 Axle Replaces OE Part Number(s) 4882351 with 30 Splines with Dana 44/216 Axle

with Dana 44 Axle with Dana 44 Axle(s)

with Dana 44 Axle with Hydra Lok

ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle

ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle

with Dana 44 Axle with Hydra Lok

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

with Dana Super 44 Axle Replaces OE Part Number(s) 5012850AA

For Dana 35; 30.54" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; Includes ABS Ring

ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle

with Dana Super 44 Axle Replaces OE Part Number(s) 5012851AA

Mileage: 77,200 miles

with Dana 44 Axle

with Dana 30 Axle

ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle

CV Type; w/Vari-Lok; 41.14 in. Length; For Use w/Dana 30

For Dana 44; 30.25" Overall Length; 5 x 4.5 Lug Pattern; 30 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

For Dana 35; 30.4375" Overall Length; 5 x 5 Lug Pattern; 27 Spline

For Dana 35; 31.8750" Overall Length; 5 x 5 Lug Pattern; 27 Spline

Dana 35 Axle Does Include Bearing, Seal, or Hardware

CV Type; w/o Vari-lok; 24.31 in. Length; For Use w/Dana 30

For Dana 35; 29.125" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; Includes ABS Ring

CV Type; w/Vari-lok; 23.25 in. Length; For Use w/Dana 30

For Dana 44; 29.26" Overall Length; 5 x 4.5 Lug Pattern; 30 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

w/Sales Code DSF (Electronic Limited Slip Differential Rear Axle)

For Use w/Dana 30; CV Joint Type

CV Type; w/o Vari-Lok; 40.08 in. Length; For Use w/Dana 30

with Dana 30 Axle

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

30.62 in. Length; For Use w/Dana 35

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Mileage: 79,000 miles

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 30.62 in. Length

ABS Ring not Included with 30.25in Shaft Length with Dana 35 Axle

For Use w/Limited Slip Differential

AMC 35; 27 Spline; 1541H Alloy AMC Model 35; 27 Spline; 1541H Alloy

Mileage: 131,000 miles

Mileage: 35,000 miles

29 in. Length; For Use w/Dana 35

w/Sales Code DSF (Electronic Limited Slip Differential Rear Axle)

with 29.04in Shaft Length with Dana 35 Axle with Non ABS

with Dana Superr 44/226 Axle Replaces OE Part Number(s) 4856333 with 30 Splines with Dana Model 44 Axle

Replaces OE Part Number(s) 4856332 with Dana 44 Axle

30-1/4 in. Length; For Use w/Dana 44

with ABS Ring with Dana 35 Axle with 2.678in O.D. ABS Ring with 29.04in Shaft Length with 54 Teeth

w/o Limited Slip Differential

30.25 in. Length; For Use w/Dana 35/AMC 35

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 29 in. Long

31.74 in. Length; For Use w/Dana 35/AMC 35

Dana 35 Axle Does Include Bearing, Seal, or Hardware

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

Dana 44 Axle Does Include Bearing, Seal, or Hardware Quadra Drive Vari-Lok

Dana 35 Axle Does Include Bearing, Seal, or Hardware

AMC 35; 27 Spline; 30 11/16 in. Length; w/54 Tooth/3.5 in. ABS Ring AMC Model 35; 27 Spline; 30 11/16 in. Length; w/54 Tooth/3.5 in. ABS Ring

For Use w/Dana 30 And Dana 30 Reverse w/ Cardan-Style Axle

AMC 35; 27 Spline; 29 1/4 in. Length; w/54 Tooth/3.5 in. ABS Ring AMC Model 35; 27 Spline; 29 1/4 in. Length; w/54 Tooth/3.5 in. ABS Ring

Dana 44 Axle Does Include Bearing, Seal, or Hardware Quadra Drive Vari-Lok

Dana 35 Axle Does Include Bearing, Seal, or Hardware

For Use w/Dana 30 And Dana 30 Reverse

with Dana 30 Disconnect Axle

w/Vari-Lok Differential; 32.33 in. Length; For Use w/Dana 44

with Dana 35 Axle with 3.858in O.D. ABS Ring with 30.25in Shaft Length with 48 Tooth ABS Ring

Dana 35 Axle Does Include Bearing, Seal, or Hardware

AMC 35; 27 Spline; 31.74 in.; Bolt In AMC Model 35; 27 Spline; 31.74 in.; Bolt In

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

w/Vari-Lok Differential; 29.34 in. Length; For Use w/Dana 44

29-1/4 in. Length; Left Side 4340 Alloy Steel; High Strength; For Use w/Dana 44

Dana 44 Axle Does Include Bearing, Seal, or Hardware

w/ Dana Model 44 Axle and w/ Vari-Lok Progressive Rear Differential

AMC 35; 30 Spline; 29 3/8 in. Length; For Use w/3.5 in. ABS Ring Dana 44HD; 30 Spline; 29 3/8 in. Length; For Use w/3.5 in. ABS Ring

w/ Dana Model 35 Axle

w/o Disconnect; Cardan Style Axle; For Use w/Dana 30 And Dana 30 Reverse w/ Cardan-Style Shaft

with Dana 35 Axle with 3.858in O.D. ABS Ring with 31.74in Shaft Length with 48 Tooth ABS Ring

w/ Dana Model 35 Axle

Replaces OE Part Number(s) 04874307 with ABS with Dana 30 Axle

AMC 35; Dana 30; CV-Style; 27 Spline; 38.51 in. Length Dana 30; Crush Sleeve Design; CV-Style; 27 Spline; 38.51 in. Length

AMC 35; 27 Spline; 30.93 in. Length AMC Model 35; 27 Spline; 30.93 in. Length

with 54 Teeth with ABS Ring Replaces OE Part Number(s) 04713193 with 2.678in O.D. ABS Ring with 30.54in Shaft Length with Dana 35 Axle

AMC 35; 30 Spline; 30 3/8 in. Length; For Use w/3.5 in. ABS Ring Dana 44HD; 30 Spline; 30 3/8 in. Length; For Use w/3.5 in. ABS Ring

Replaces OE Part Number(s) 4856333 with Dana 44 Axle

AMC 35; 27 Spline; 31.74 in. Length AMC Model 35; 27 Spline; 31.74 in. Length

with Dana 44 Axle with Hydra Lok

29-1/4 in. Length; Right Side 4340 Alloy Steel; High Strength; For Use w/Dana 44

with Dana Super 44 Axle Replaces OE Part Number(s) 5012851AA

with Dana Super 44 Axle Replaces OE Part Number(s) 5012850AA

with ABS Ring with Dana 35 Axle with 3.464in O.D. ABS Ring with 30.54in Shaft Length with 54 Teeth

Dana 44; 30 Spline; 29.25 in. Length Dana 44HD; 30 Spline; 29.25 in. Length

w/ Dana Model 44 Axle and w/ Trac-Lok Rear Differential

with Dana 44 Axle with Hydra Lok

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

Dana 44; 30 Spline; 30.25 in. Length Dana 44HD; 30 Spline; 30.25 in. Length

w/ Dana Model 44 Axle and w/ Trac-Lok Rear Differential

Replaces OE Part Number(s) 04874306 with ABS with Dana 30 Axle

Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Disconnect Axle

with ABS Ring with Dana 35 Axle with 29.04in Shaft Length with 3.464in O.D. ABS Ring with 54 Teeth

Dana 44; 30 Spline; 32.25 in. Length Dana 44HD; 30 Spline; 32.25 in. Length

AMC 35; 30 Spline; 31.75 in. Length Dana 44HD; 30 Spline; 31.75 in. Length

Fits Standard Or TracLok; 30.34 in. Length; For Use w/Dana 44

Dana 30; AMC 35; 27 Spline; 32.4 in. Length; For Use w/ABS Ring Dana 30; Crush Sleeve Design; 27 Spline; 32.4 in. Length; For Use w/ABS Ring

Replaces OE Part Number(s) 04797134 with ABS with Dana 30 Axle

For vehicles with an electronic limited slip differential.

Mileage: 152,000 miles

For 4-door vehicles with 4-wheel drive, the 5.7L engine, and a 5-speed automatic transmission. This part is for the rear of the vehicle.

Mileage: 139,900 miles

For vehicles with the 3.6L engine and a single speed transfer case (model MP3010).

Mileage: 158,200 miles

It is a CV type front axle.

This CV axle fits vehicles with the front left axle position.

Mileage: 69,000 miles

Mileage: 98,000 miles

Mileage: 78,000 miles

Uni-Ball For 3-Links; Fits JL/JT Aftermarket Diffs [Only] And All JK/TJ/LJ/XJ/MJ/ZJ Stock And Aftermarket Diffs

Replaces OE Part Number(s) 4728984 with ABS Ring

with Dana 30 Axle 1.062in Bearing Cap Diameter with 6.11in Shaft Length

Mileage: 69,000 miles

Mileage: 69,000 miles

Mileage: 98,000 miles

Mileage: 41,100 miles

Mileage: 20,000 miles

Dana 30/30 Reverse; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints Dana 30; Crush Sleeve Design; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints~Dana 30; Front Axle Kit; 4340 Chrome-Moly Upgrade; Includes 27 Spline Inner and Outer Shafts. Disconnect Block Off Kit. and Yukon Super Joints.