Jeep Cherokee Drive Axle Shaft Replacement

It fits 4WD vehicles with the 3.2L engine and off-road suspension (option code SDJ).

Mileage: 148,000 miles

Mileage: 94,700 miles

This is the front axle shaft assembly.

Mileage: 25,500 miles

Mileage: 80,000 miles

This is the axle shaft assembly.

Mileage: 11,700 miles

Mileage: 46,400 miles

Mileage: 121,000 miles

This is the front axle shaft assembly.

Mileage: 83,000 miles

Built for 4WD vehicles with the 2.4L engine.

Mileage: 89,000 miles

Mileage: 98,300 miles

Mileage: 104,000 miles

This is the front axle shaft assembly.

Mileage: 40,500 miles

This is the axle shaft assembly.

Mileage: 94,700 miles

It fits vehicles with off-road suspension (option code SDJ).

Mileage: 148,000 miles

Mileage: 96,500 miles

Mileage: 104,000 miles

Mileage: 105,000 miles

Built for front-wheel drive (FWD) vehicles with the 3.2L engine.

Mileage: 122,000 miles

This is the front axle shaft assembly.

Mileage: 72,900 miles

Mileage: 121,000 miles

Built for 4-wheel drive vehicles with the 3.2L engine.

Mileage: 148,000 miles

Mileage: 96,500 miles

Mileage: 84,400 miles

Mileage: 98,300 miles

Mileage: 101,500 miles

Mileage: 11,700 miles

Mileage: 78,300 miles

Mileage: 40,500 miles

Mileage: 21,400 miles

This is a rear axle shaft assembly.

Mileage: 13,100 miles

Mileage: 51,100 miles

Mileage: 21,400 miles

For 4-wheel drive vehicles with the 2.4L engine.

Mileage: 121,000 miles

Mileage: 143,600 miles

Mileage: 42,400 miles

Mileage: 135,000 miles

Mileage: 59,600 miles

Mileage: 121,000 miles

Built for 4-wheel drive vehicles with the 3.20L engine.

Mileage: 94,000 miles

Mileage: 62,000 miles

Mileage: 185,000 miles

Mileage: 105,000 miles

Mileage: 121,000 miles

This is a front axle shaft assembly. It fits vehicles with the off-road suspension (option code SDJ).

Mileage: 80,900 miles

It is a front axle shaft assembly. It fits vehicles with off-road suspension (option code SDJ).

Mileage: 80,900 miles

Mileage: 11,700 miles

Mileage: 25,500 miles

Mileage: 104,000 miles

Mileage: 121,000 miles

Mileage: 99,000 miles

Built for front-wheel drive (FWD) vehicles with the 2.4L engine.

Mileage: 126,000 miles

Mileage: 45,200 miles

Mileage: 142,000 miles

For vehicles with the 3.2L engine, automatic transmission, and front-wheel drive. Fits 4-door models.

Mileage: 89,200 miles

For 4-door vehicles with the 3.2L engine and 9-speed automatic transmission. This part is for front-wheel drive vehicles.

Mileage: 56,900 miles

For vehicles with the 3.2L engine, 9-speed automatic transmission, and front-wheel drive. Fits 4-door models.

Mileage: 162,600 miles

For 4-door vehicles with the 2.4L engine and 9-speed automatic transmission. For front-wheel drive vehicles.

Mileage: 129,000 miles

Mileage: 63,000 miles

Mileage: 86,000 miles

Mileage: 57,000 miles

Mileage: 63,000 miles

For Use w/Disconnect Axle

with Dana 35 Axle

ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle

30.35 in. Length; Flanged; For Use w/Dana 35

28.85 in. Length; Flanged; For Use w/Dana 35

Mileage: 28,000 miles

with Dana 35 Axle

ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle

Mileage: 28,000 miles

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

with Dana 30 Axle with Non ABS

30 Spline; 29.25 in. Length; For Use w/Dana 44

Dana 35 Axle Does Include Bearing, Seal, or Hardware

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

30 Spline; 29.75 in. Length; For Use w/Dana 44

30.35 in. Length; For Use w/Dana 35

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

with Dana 30 Disconnect Axle

28.85 in. Length; For Use w/Dana 35

Dana 35 Axle Does Include Bearing, Seal, or Hardware

with Dana 44 Axle with Dana 44 Axle(s)

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 30.62 in. Length

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

30.54 in. Length; For Use w/Dana 35

Incl. Bearing/Seal And Retainer; 29.04 in. Length; For Axle Shaft w/Tone Ring Order PN[5252948]; For Use w/Dana 35

30.54 in. Length; For Use w/Dana 35

Flanged; 29.25 in. Length; For Use w/AMC 20

Replaces OE Part Number(s) 4856333 with Dana 44 Axle

29.04 in. Length; For Use w/Dana 35

Dana 44 Axle Does Include Bearing, Seal, or Hardware

AMC 35; Dana 30; 27 Spline; 16.63 in. Length Dana 30; Reverse Rotation; 27 Spline; 16.63 in. Length

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

8.25 in. 10 Bolt; AMC 35; 29 Spline; 29 13/16 in. Length; 5 Lug Chrysler 8.25 in.; 29 Spline; 29 13/16 in. Length; 5 Lug~Chrysler 8.25 in.; Rear Axle Shaft; 29 Spline; 29 13/16 in. Long; Double Drilled for 5x4.5 in. & 5x5.5 in. bolt patterns

Flanged; 27.75 in. Length; For Use w/AMC 20

Dana 30; 27 Spline; 15.80 in. Length Dana 30 Disconnect; Intermediate Axle; 15.80 in.; 15 spline; 297X U-Joint

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

with 29.04in Shaft Length with Dana 35 Axle with Non ABS

For Use w/Dana 30 And Dana 30 Reverse

Dana 44 Axle Does Include Bearing, Seal, or Hardware

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Replaces OE Part Number(s) 4856332 with Dana 44 Axle

For Use w/Dana 30 And Dana 30 Reverse

with ABS Ring with Dana 35 Axle with 2.678in O.D. ABS Ring with 29.04in Shaft Length with 54 Teeth

with 5-760X Universal Joint - Required with Dana 30 Axle Requires 5-760X U-Joint with 16.61in Axle with 27 Spline Teeth

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 29 in. Long

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

Chrysler Axle Does Include Bearing, Seal, or Hardware

with Dana 30 Axle Replaces OE Part Number(s) 04874307 with ABS

Dana 30; Reverse Rotation

Dana Model 44 Axle

with Dana 30 Disconnect Axle

with 54 Teeth with ABS Ring Replaces OE Part Number(s) 04713193 with 2.678in O.D. ABS Ring with 30.54in Shaft Length with Dana 35 Axle

AMC 35; 27 Spline; 29 7/8 in. Length; 5 Lug Chrysler 8.25 in.; 27 Spline; 29 7/8 in. Length; 5 Lug

Replaces OE Part Number(s) 4856333 with Dana 44 Axle

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Disconnecting Axle

AMC 35; 27 Spline; 30 11/16 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring AMC Model 35; 27 Spline; 30 11/16 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring

Replaces OE Part Number(s) 4882351 with Dana 44 Axle with Dana 44 Axle(s)

Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset~Dana 44; Aftermarket 35 Spline Axle; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bearing Offset

AMC 35; 27 Spline; 29 1/4 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring AMC Model 35; 27 Spline; 29 1/4 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring

AMC 35; 27 Spline; 29 in. Length; Bolt-In AMC Model 35; 27 Spline; 29 in. Length; Bolt-In

AMC 35; 27 Spline; 30 1/2 in. Length; Bolt-In AMC Model 35; 27 Spline; 30 1/2 in. Length; Bolt-In

AMC 35; Spline; 32.28 in. Length Dana 30; Reverse Rotation; 30 Spline; 32.28 in. Length

AMC 35; 30 Spline; 30 11/16 in. AMC Model 35; 30 Spline; 30 11/16 in.

AMC 35; 27 Spline; 30 11/16 in. AMC Model 35; 27 Spline; 30 11/16 in.~Model 35; Left Rear Axle Shaft; 27 Spline; 30 11/16 in. Long; C-Clip Axle; 5 x 4.5 in. Bolt Pattern

AMC 35; 27 Spline; 29 1/4 in. AMC Model 35; 27 Spline; 29 1/4 in.~Model 35; Right Rear Axle Shaft; 27 Spline; 29 1/4 in. Long; C-Clip Axle; 5 x 4.5 in. Bolt Pattern

AMC 35; 30 Spline; 29 1/4 in. AMC Model 35; 30 Spline; 29 1/4 in.

w/o Disconnect; For Use w/Dana 30 And Dana 30 Reverse

AMC 35; 27 Spline; 29 in. Length AMC Model 35; 27 Spline; 29 in. Length

AMC 35; 27 Spline; 30 1/2 in. Length AMC Model 35; 27 Spline; 30 1/2 in. Length

AMC 35; 27 Spline; 29 1/4 in. Length; For Use w/51 Tooth/2.7 in. ABS Ring AMC Model 35; 27 Spline; 29 1/4 in. Length; For Use w/51 Tooth/2.7 in. ABS Ring

Dana 44; AMC 35; 30 Spline; 29 3/4 in. Length Dana 44; 30 Spline; 29 3/4 in. Length

w/o Disconnect; Cardan Style Axle; For Use w/Dana 30 And Dana 30 Reverse w/o Disconnect

Dana 30/AMC 35; 30 Spline; 16.6 in. Length Dana 30; Reverse Rotation; 30 Spline; 16.6 in. Length

Dana 30; AMC 35; 27 Spline; 32.36 in. Length Dana 30; Reverse Rotation; 27 Spline; 32.36 in. Length

Dana 44; AMC 35; 30 Spline; 29 1/4 in. Length Dana 44; 30 Spline; 29 1/4 in. Length

Dana Model 44 Axle

AMC 35; 8 in.; HD; 30 11/16 in. Long; 30 Spline; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug AMC Model 35; 30 11/16 in. Long; 30 Spline; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug

AMC 35; 8 in.; 29.25 in. Long; 30 Spline; HD; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug AMC Model 35; 29.25 in. Long; 30 Spline; HD; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug

AMC 35; 8 in.; HD; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 30 11/16 in. Length AMC Model 35; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 30 11/16 in. Length

AMC 35; 8 in.; HD; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 29 1/4 in. Length AMC Model 35; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 29 1/4 in. Length

Dana 30; AMC 35; 27 Spline; 22.7 in. Length Dana 30; Reverse Rotation; 27 Spline; 22.7 in. Length

Dana 30; AMC 35; 27 Spline; 38.5 in. Length Dana 30; Reverse Rotation; 27 Spline; 38.5 in. Length

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

with 5-760X Universal Joint - Required with Dana 30 Axle Requires 5-760X U-Joint with 27 Spline Teeth with 32.36in Axle

with Dana 30 Axle Replaces OE Part Number(s) 04874306 with ABS

Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Disconnect Axle

For Use w/Dana 30 Reverse; w/Disconnect; HD U Joint

Exc.Disconnecting Axle

Replaces OE Part Number(s) 4882350 with Dana 44 Axle with Dana 44 Axle(s)

Replaces OE Part Number(s) 04797134 with Dana Model 30 Axle

with OE Version 1.188in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

For 4-door vehicles with 4-wheel drive, the 2.0L engine, and an automatic transmission.

Mileage: 147,700 miles

w/o ABS; Front

Mileage: 135,000 miles

Mileage: 52,000 miles

This is the inner axle shaft.

Mileage: 203,200 miles

w/ABS; For Use w/Dana 30

For Use w/Dana 30

27 Spline; 29.875 in. Length; For Use w/8.25 in. 10 Bolt Axle

Uni-Ball For 3-Links; Fits JL/JT Aftermarket Diffs [Only] And All JK/TJ/LJ/XJ/MJ/ZJ Stock And Aftermarket Diffs

29 Spline; 26.25 in. Length; For Use w/8.25 in. 10 Bolt Axle

Replaces OE Part Number(s) 4728984 with ABS Ring

with 6.11in Axle with Dana 30 Axle Requires 5-760X U-Joint with 27 Spline Teeth with 5-760X Universal Joint - Required

1.062in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly Dana 44; 30 Spline; 4340 Chrome-Moly; 26 in. to 32 in. Cut to Fit Axle; Must Be Cut to the Correct length; Triple Drilled for 5 x 4.5. 5 x 5. & 5 x 5.5 bolt patterns.~Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly

Mileage: 2,000 miles

Supersedes part # 52123658AE

w/o Jeep Active Drive II;Supersedes part # 52123661AD

with 8.31in Axle with Applications Converting to Manual Locking Hubs Only Design Requires 5-760X U-Joint with 27 Spline Teeth with 5-760X Universal Joint - Required with Dana 30 Axle

Supersedes part # 68238841AB

Shaft - Axle half, Right or Left [Off Road Suspension];Supersedes part # 52123739AE

Dana 30/30 Reverse; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints Dana 30; Reverse Rotation; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints~Dana 30; Front Axle Kit; 4340 Chrome-Moly Upgrade; Includes 27 Spline Inner and Outer Shafts. Disconnect Block Off Kit. and Yukon Super Joints.