2003-2008 Isuzu Ascender Transfer Case Shift Motor (Used OEM)

It features a 7-pin electrical connector and is designed to attach directly to the transfer case. Fits vehicles with option code NP8.

Mileage: 156,000 miles

$45.95 View part →

✓ In Stock

2003-2006 Isuzu Ascender Single-Speed Transfer Case Motor (5-Pin Plug) (Used OEM)

Partslink #: 420-00141

It features a 5-pin plug electrical connector and is designed to attach to the transfer case (option code NP4).

Mileage: 227,000 miles

$119.95 View part →

✓ In Stock

2003-2008 Isuzu Ascender Transfer Case Motor (Dorman)

Partslink #: 600-903

Fits New Process 226 Rectangular Plug w/7 Pins w/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)

$268.46 View part →

Connector Gender: Female, Connector Quantity: 1, Connector Shape: Rectangle, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 4, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 13, Terminal Gender: Male, Terminal Quantity: 7, Terminal Type: Blade, Wire Quantity: 7, Wiring Harness Included: Yes, Wiring Harness Length: 13.75

✓ In Stock

2003-2008 Isuzu Ascender Transfer Case Motor (Cardone)

Partslink #: 48-101

with Rectangular Harness Plug with 7 Terminal Plug(s)

$280.50 View part →

✓ In Stock

Mileage: 114,000 miles

$584.95 View part →

Isuzu Ascender Transfer Case Motor Replacement

2003-2008 Isuzu Ascender Transfer Case Shift Motor (Used OEM)

2003-2006 Isuzu Ascender Single-Speed Transfer Case Motor (5-Pin Plug) (Used OEM)

2003-2008 Isuzu Ascender Transfer Case Motor (Dorman)

2003-2008 Isuzu Ascender Transfer Case Motor (Cardone)

2003-2006 Isuzu Ascender Transfer Case Motor (Autopart International)

2003-2006 Isuzu Ascender Transfer Case Motor (Dorman)

2003-2006 Isuzu Ascender Magnetic Ride Control Suspension Module (Used OEM)

What buyers are saying.

Racing Partner Videos

Transfer Case Motor Compatibility for Isuzu Ascender

Available Trims

Body Types

Engine Options

Transmissions