Honda Civic Exhaust Muffler Replacement

Requires 19050 Modifications and/or Additional Parts May Be Required for Installation

If welded assembly, replace all required parts Optional Parts for Split System

with Welded Heat Shield

If welded assembly, replace all required parts

DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2 in. Center Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Inlet Universal Muffler; 19 in. Overall Length X 5.25 in. Dia.; 4 in. Exhaust Tip; T-304 Stainless Steel

Models made in Japan

For Models made in Japan

This is a rear muffler exhaust silencer pipe.

Mileage: 29,000 miles

2.25 in. Inlet/Outlet; 409 Stainless Internal Components; 304 Stainless Case

It fits vehicles with a 1.5L engine.

Mileage: 18,500 miles

This part was cut from the vehicle structure during removal.

Mileage: 7,000 miles

It fits vehicles with the 2.0L engine. This part includes the exhaust system muffler and tail pipe.

Mileage: 30,200 miles

This is the rear exhaust muffler and pipe for vehicles with the 2.0L engine and front-wheel drive. This part was cut from the vehicle structure during removal.

Mileage: 75,000 miles

Mileage: 61,000 miles

Mileage: 25,000 miles