Honda Civic Engine Harmonic Balancer Replacement

Mileage: 152,300 miles

This part is for England-built models.

Mileage: 99,000 miles

Mileage: 99,000 miles

Mileage: 99,000 miles

Groove Qty. 7 Part Type: Serpentine Outer Diameter: 6.16 in ATP Number: 102283 ATP Availability: Available to Order ATP Supersession: Replaces 102282 Pioneer Number: DA-6030 Pioneer Availability: Available to Order

ATP Number: 102167 ATP Availability: Available to Order Pioneer Number: DA-225 Pioneer Availability: Available to Order

WARNING SEE INSTRUCTION SHEETS

Mileage: 256,000 miles

WARNING SEE INSTRUCTION SHEETS

WARNING SEE INSTRUCTION SHEETS

WARNING SEE INSTRUCTION SHEETS

For vehicles with the 2.4L engine and manual transmission.

Mileage: 99,000 miles

Description: Groove Qty. 4, 4, 4 Part Type: Triple Serpentine Outer Diameter: 6.375 in

Mileage: 188,100 miles

Groove Qty. 6, 4 Part Type: Double Serpentine Outer Diameter: 6.95 in ATP Number: 102256 ATP Availability: Available to Order Pioneer Number: DA-224 Pioneer Availability: Available to Order

Groove Qty. 4, 4, 4 Part Type: Triple Serpentine Outer Diameter: 6.65 in ATP Number: 102280 ATP Availability: Available to Order Pioneer Number: DA-1589 Pioneer Availability: Available to Order

For vehicles with the 1.5L turbocharged engine.

Mileage: 99,000 miles

For vehicles with the 1.5L hybrid engine.

Groove Qty. 4, 4, 4 Part Type: Triple Serpentine Outer Diameter: 6.375 in ATP Number: 102197 ATP Availability: Available to Order Pioneer Number: DA-1600 Pioneer Availability: Available to Order

Mileage: 99,000 miles

Bore Dia. Min/Max: 1.1815 / 1.1825 Degree Marking Range: 4 Timing marks Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 1.97 Material: Steel Mounting Hardware Incl.: No O.D.: 5-7/8" (5.900) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 6.5 (4.3 Rwt)

Bore Dia. Min/Max: 1.1003 / 1.1013 Degree Marking Range: TDC, 3 timing marks 2 degrees apart Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.479 Material: Steel Mounting Hardware Incl.: No O.D.: 5-7/8" (5.900) Pulley Finish: Hard Coat Anodized Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 7.8 (5.3 Rwt)

Bore Dia. Min/Max: 1.1003 / 1.1013 Degree Marking Range: 50 degree BTDC to 10 degree ATDC. Additional timing marks at 90, 180 and 270 de Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.329 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Pulley Size: 40% Underdrive - Alternator Pulley Only Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 8.8 (5.9 Rwt) 40% underdrive alt. pulley only. No PS / AC pulleys.