GMC Yukon Transfer Case Assembly Replacement

It fits 4-door vehicles with 4-wheel drive, the 6.2L engine, and an automatic transmission. It is for vehicles with option code NQH.

Mileage: 149,400 miles

It fits 4-wheel drive models with option code NQH, option code HP2, and option code M99.

Mileage: 200,500 miles

Mileage: 76,000 miles

It fits 4x4 vehicles equipped with the 5.3L engine and a 6-speed automatic transmission (option code MYC).

Mileage: 66,000 miles

This is a remanufactured transfer case assembly. It is sold without the shift actuator motor. This part fits vehicles with option code NQH.

This is a remanufactured transfer case assembly. The part has chewed up teeth. It comes with a 1-year unlimited mileage warranty. A core charge applies, and the core must be fully drained and returned in its original packaging to receive full credit.

This is a remanufactured part. It fits vehicles with option code NQH. It is compatible with 6.0L hybrid engines (option codes HP2 and M99).

This part does not include the shift motor. It fits vehicles with option code NQH and is not for hybrid models.

Mileage: 150,800 miles

It features a circular flange on the front drive shaft and an input shaft that measures 1 1/8 inches. This part is compatible with vehicles using the 4L60E automatic transmission (option code M30) and a gasoline engine.

Mileage: 221,500 miles

It fits 4x4 vehicles with option code NQH. This is for vehicles with a 2-speed transfer case and does not fit hybrid models.

Mileage: 103,000 miles

It is a 2-speed transfer case and is compatible with vehicles that do not have the hybrid option.

Mileage: 134,000 miles

It fits vehicles with option code NQH and does not fit hybrid models.

It fits vehicles with the 5.3L engine and option code NQH. This is a 2-speed transfer case. It is compatible with vehicles that have a 6-speed automatic transmission (option code MYC) and does not fit hybrid models.

Mileage: 175,900 miles

It fits vehicles with the 5.3L engine and option code NQH. This is a 2-speed transfer case. It is compatible with vehicles that have a 6-speed automatic transmission (option code MYC) and is for models without the hybrid option.

Mileage: 134,000 miles

It is a 2-speed transfer case. This part fits vehicles without the hybrid option.

Mileage: 141,000 miles

It fits vehicles with the 5.3L engine, automatic transmission, and four-wheel drive (4x4). It is for vehicles with option code NQH and a 2-speed transfer case. This part is not for hybrid models.

Mileage: 134,000 miles

It is for vehicles with an electric shift dash switch and the 2-speed transfer case (option code NQH). It fits vehicles with a 6-speed automatic transmission (option code MYC). This part is for vehicles without the hybrid option.

Mileage: 181,000 miles

It is for vehicles with the 2-speed transfer case (option code NQH) and a 6-speed automatic transmission (option code MYC). This part is not for hybrid vehicles.

Mileage: 142,000 miles

It fits vehicles with option code NQH. This is a 2-speed transfer case. It is compatible with vehicles that have a 6-speed transmission (option code MYC) and does not fit hybrid models.

Mileage: 178,000 miles

It fits vehicles with option code NQH. This is a 2-speed transfer case. It is for vehicles without the hybrid option.

Mileage: 100,000 miles

It fits vehicles with the New Venture type 246 transfer case and option code NP8. It is designed for vehicles with automatic four-wheel drive (4x4), the 4L60E automatic transmission (option code M30), and an electric dash switch. This part is not for Denali models.

Mileage: 189,000 miles

It fits vehicles with the 5.3L engine, automatic transmission, and 4-wheel drive. It is for vehicles with option code NQH, option code KF542, and option code MP3023. This is a 2-speed transfer case. It is for vehicles without the hybrid option.

This is a remanufactured transfer case assembly. It features a dash switch for electric shifting. This part fits vehicles with the New Venture type 246 transfer case, GM option code NP8 (automatic 4WD), and the 4L60E automatic transmission (option code M30). It is not for Denali models.

This is a remanufactured part. It features a circular flange on the front drive shaft and an input shaft that measures 1 1/8 inches. This part is for vehicles with a gasoline engine and an automatic 4L60E transmission (option code M30).

This is a remanufactured transfer case assembly. It does not include the shift actuator motor. This part fits vehicles with option code NQH.

It fits 4x4 vehicles with the 5.3L engine. It is for vehicles with a single-speed transfer case (option code NP0).

Mileage: 133,200 miles

For 4-door vehicles with 4-wheel drive. This part includes the knob.

Mileage: 121,900 miles

It is for vehicles with option code NP0.

Mileage: 198,700 miles

It fits vehicles with a single-speed transfer case (option code NP0).

Mileage: 135,000 miles

Mileage: 68,000 miles

It fits vehicles with option code NQG.

Mileage: 127,000 miles

It fits 4x4 vehicles with the 4.3L engine and automatic transmission. It is for vehicles with option code NQG.

Mileage: 173,500 miles

It features an electric shift dash switch (option code NP1). This is a New Process 243C model with a two-switch, three-selection dash control for 2HI, 4HI, and 4LO.

Mileage: 266,600 miles

It is being sold as a rebuildable core. This part fits vehicles with the 6.2L engine and All-Wheel Drive (AWD). It is compatible with option code NR3.

This is a manual shift transfer case (New Process 241C).

Mileage: 284,200 miles

It is for 4x4 vehicles with a 5.7L engine and a manual shift transfer case. It features a floor shift and a strap-style front drive shaft yoke for the U-joint. This is a New Process 241C model with an input shaft measuring 1 3/8 inches.

Mileage: 269,000 miles

For vehicles with an automatic transmission (4L60E) and a floor shift. The input shaft measures 1 1/8 inches and has 27 teeth. Features a U-joint flange on the front drive shaft.

Mileage: 161,400 miles

It fits vehicles equipped with a 10-speed transmission (option code MQB).

Mileage: 152,000 miles

This part does not include the shift motor. It fits vehicles with a 2-speed transfer case (option code NQH) and a 10-speed transmission (option code MQB).

Mileage: 101,700 miles

It features an open differential and a single-speed transfer case (Borg Warner 4481). Fits vehicles with option code NR3.

Mileage: 207,000 miles

It features an electric shift controlled by a dash switch. This part is for vehicles with the NQH transfer case option and a 4-speed automatic transmission (option code M30). It is not for hybrid vehicles.

Mileage: 146,000 miles

It fits vehicles with a 5.3L engine, automatic transmission, and 4-wheel drive. It does not include the shift motor. It is compatible with option code NR4.

Mileage: 100,000 miles

It fits vehicles with 4-wheel drive, the 5.7L engine, and a 4-speed automatic transmission. This is a New Process 243C transfer case. It is designed for vehicles with a two-switch, three-selection dash control (2HI, 4HI, and 4LO) and the electric shift dash switch (option code NP1).

Mileage: 255,700 miles

It features a flat, round front drive shaft yoke and an input shaft measuring 1 3/8 inches. This is a New Process 241C model. The range shift lever arm angle may vary; you may need to include the linkage arm. It uses a 2-wire transfer case select switch with a short shank.

Mileage: 133,000 miles

It fits 4-wheel drive vehicles with a 5.3L engine and automatic transmission. It is designed for vehicles with a single-speed transfer case (option code NP0).

Mileage: 43,000 miles

It fits vehicles with option code NQH.

Mileage: 107,000 miles

It fits 4x4 vehicles with the 5.3L engine and an automatic transmission. It is a New Venture Gear NVG246 transfer case (option code NP8). This part is for vehicles with the Autotrac system. It fits vehicles with the 4L70E transmission (option code M70) or option codes M30 and M33. It does not fit Denali models or vehicles with the 4L80E transmission.

Mileage: 222,500 miles

It is compatible with vehicles equipped with option codes MHS or MQC.

Mileage: 99,000 miles

For vehicles with the 5.3L engine and a single-speed transfer case (option code NP0). This part is compatible with vehicles using option code MHS or MQC.

Mileage: 26,000 miles

Mileage: 100,000 miles

For vehicles with option code NP0.

Mileage: 141,000 miles

For vehicles with an 8-speed automatic transmission (option code MQE) and a single-speed transfer case.

Mileage: 58,000 miles

Mileage: 141,000 miles

Please verify that your part identification number matches (option code NQH).

Mileage: 172,000 miles

For 4-door vehicles with 4-wheel drive, the 5.3L engine, and automatic transmission. This fits vehicles with option code NQH. Please verify the part identification number matches.

Mileage: 145,600 miles

This part was tested and ran well.

Mileage: 142,000 miles

It is compatible with the New Process 149 system (option code NP3). This part fits all-wheel drive (AWD) vehicles, including Denali and SS models.

Mileage: 151,400 miles

This is a remanufactured transfer case assembly. It is sold without the shift actuator motor. This part fits vehicles with option code NQH, but it does not fit hybrid models or Denali models.

This is a remanufactured transfer case. It features a 2-year or 24,000-mile warranty. This part fits vehicles with the New Venture Gear NVG246 Autotrac system (option code NP8). It is compatible with vehicles equipped with the 4L70E automatic transmission (option code M70), option code M30, or option code M33. This part is not for Denali models and is for vehicles without the 4L80E transmission.

This is a remanufactured transfer case assembly. It features a two-switch, three-selection dash control for 2HI, 4HI, and 4LO. Built for vehicles with an electric dash switch (option code NP1). This part includes a 2-year or 24,000-mile warranty.

This is a remanufactured transfer case. It features a 1 3/8-inch input shaft and a strap-style front drive shaft yoke for the U-joint. This is a New Process 241C model. It fits vehicles with a 4L80E transmission and a floor shift.

This is a remanufactured transfer case assembly. It is a Borg Warner 4481 single-speed transfer case with an open differential. It fits all-wheel drive vehicles with option code NR3. This part does not include the shift actuator motor.

This is a remanufactured transfer case. It features a two-switch, three-selection dash control for two-wheel drive high (2HI), four-wheel drive high (4HI), and four-wheel drive low (4LO). This part is for vehicles with an electric dash switch (option code NP1).

This is a remanufactured part. This transfer case is a New Process 241C model. It features an input shaft measuring 1 3/8 inches and a strap-style front drive shaft yoke for the U-joint. Built for vehicles with a manual transmission (option code M50 or MG5).

This is a remanufactured part. It features an input shaft measuring 1 1/8 inches with 27 teeth. It includes a U-joint flange on the front drive shaft. This part is for vehicles with an automatic 4L60E transmission and a floor shift.

This is a remanufactured part. This is an electric shift transfer case for vehicles with option code NP8 (automatic four-wheel drive (4x4)). It is designed for systems with a two-switch, four-selection dash control (2HI, 4HI, 4LO, and AUTO 4WD).

This is a remanufactured transfer case. It features an electric shift design (option code NP8) for vehicles with automatic four-wheel drive (4x4). This unit is compatible with vehicles using a three-switch, five-selection dash control (2HI, 4HI, 4LO, AUTO 4WD, and NEUTRAL).

This is a remanufactured part. This is an electric shift transfer case for vehicles with option code NP8 (automatic four-wheel drive (4x4)). It is designed for systems with a three-switch, five-selection dash control including 2HI, 4HI, 4LO, AUTO 4WD, and NEUTRAL.

This is a remanufactured transfer case assembly. It comes without the shift actuator motor. It fits vehicles with option code NP0.

This is a remanufactured part. It includes a 2-year or 24,000-mile warranty. This part fits vehicles with all-wheel drive (AWD) and option code NR3.

This is a remanufactured part. This transfer case assembly is a Borg Warner 4482 model for vehicles with option code NR4.

This is a remanufactured part. It fits vehicles with option code NQG.

This is a remanufactured part. It includes a 2-year or 24,000-mile warranty. Built for vehicles with option code NQG.

This is a remanufactured part. It includes a 2-year or 24,000-mile warranty. Built for vehicles with option code NQH.

This is a remanufactured transfer case assembly. It fits vehicles with option code NQH.

This is a remanufactured transfer case. It includes a 2-year or 24,000-mile warranty. This part fits all-wheel drive (AWD) vehicles with option code NP3 and the New Process 149 system. It is compatible with Denali and SS models, as well as classic style vehicles with the creased door skin.

This is a remanufactured part. It fits vehicles with option code NP0.

This is a remanufactured part. It includes a 2-year or 24,000-mile warranty. Built for vehicles with option code NP0.