GMC Yukon Differential Carrier Assembly Replacement

It features a 3.42 axle ratio (option code GU6).

Mileage: 140,000 miles

It fits vehicles with the NQH option code.

Mileage: 138,000 miles

This is a remanufactured part. It features a 3.42 axle ratio (option code GU6) and includes a 2-year unlimited mile parts and labor warranty. This part fits vehicles with option code NQH.

For vehicles with 4-wheel drive, the 6.2L engine, and a 6-speed automatic transmission. It features a 3.42 axle ratio (option code GU6). Built for 4-door models.

Mileage: 192,500 miles

For vehicles with a 3.73 gear ratio (option code GT4). The right inner axle shaft housing has one shift actuating switch.

Mileage: 206,400 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 132,000 miles

It features a 3.73 gear ratio (option code GT4). This part is for vehicles without all-wheel drive (AWD).

Mileage: 179,000 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 188,000 miles

It features a 3.42 axle ratio (option code GU6).

Mileage: 175,000 miles

Mileage: 111,000 miles

It features a 3.08 gear ratio (option code GU4). Please verify that your part identification number matches.

Mileage: 56,000 miles

Mileage: 118,700 miles

This is a remanufactured carrier assembly. It is built for vehicles with a 3.73 ratio (option code GT4) and without all-wheel drive. This part does not include the shift actuator motor.

This is a remanufactured carrier assembly. It features a 3.08 ratio (option code GU4). This part does not include the shift actuator motor.

This is a remanufactured Carrier Assembly. It features a 3.42 axle ratio (option code GU6). This part does not include the shift actuator motor.

This is a remanufactured part. It features a 3.73 gear ratio (option code GT4) and includes a 2-year unlimited mile parts and labor warranty. The right inner axle shaft housing has one shift actuating switch. This part fits Denali models with option code GT4.

For vehicles with a 3.42 axle ratio (option code GU6). The right inner axle shaft housing has one shift switch.

Mileage: 223,600 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 126,000 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 157,000 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 198,700 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 168,000 miles

It was tested and ran well. 1-year and 3-year warranties are available.

Mileage: 142,000 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 190,000 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 106,000 miles

It is a front axle carrier assembly with a 3.08 gear ratio (option code GU4).

Mileage: 121,000 miles

It features a 3.08 gear ratio (option code GU4).

Mileage: 159,900 miles

This is a remanufactured carrier assembly. It features a 3.08 gear ratio (option code GU4).

This is a remanufactured part. It features a 3.42 axle ratio (option code GU6). The right inner axle shaft housing includes one shift actuating switch. This part comes with a 2-year unlimited mile parts and labor warranty.

This is a remanufactured part. It includes a 2-year unlimited mile parts and labor warranty. This part features a 3.23 gear ratio and is a non-locking (NL) type.

It fits 4x4 vehicles with a 6.2L engine and automatic transmission. It is for vehicles with a 3.23 axle ratio (option code GU5) and option code SU4.

Mileage: 41,000 miles

It also fits vehicles with option code SU4.

Mileage: 156,000 miles

It is for vehicles with four-wheel drive (4x4) and a 3.73 axle ratio (option code GT4).

Mileage: 167,000 miles

For vehicles with a 3.23 gear ratio (option code GU5).

Mileage: 187,000 miles

It features a 3.42 axle ratio (option code GU6).

Mileage: 124,000 miles

It features a 3.23 gear ratio (option code GU5).

Mileage: 111,000 miles

This part needs a new housing. For vehicles with a 3.42 axle ratio (option code GU6). This is for rear-wheel drive models only (without AWD).

Mileage: 62,000 miles

For vehicles with a 3.08 gear ratio (option code GU4). This part is for police package vehicles.

Mileage: 58,900 miles

It has a 3.42 axle ratio (option code GU6). This part does not include the pinion yoke or the actuator switch. The right inner axle shaft housing has two shift actuating switches. You may need to switch the front axle shift actuator and harness to match your vehicle's connector (two, three, and five-way connectors are available).

Mileage: 175,000 miles

It is a front carrier assembly with a 3.23 gear ratio (option code GU5).

Mileage: 83,000 miles

Mileage: 121,000 miles

For vehicles with 4-wheel drive, the 5.3L engine, and a 6-speed automatic transmission. It features a 3.23 gear ratio (option code GU5 or GU4). This part fits 4-door models.

Mileage: 176,000 miles

It features a 3.23 gear ratio (option code GU5).

Mileage: 171,000 miles

It features a 3.73 ratio (option code GT4). The right inner axle shaft housing has two shift actuating switches. You may need to switch the front axle shift actuator and harness to match your vehicle, as two, three, and five-way connectors are available.

Mileage: 178,100 miles

It fits vehicles with transfer case options NP0, NQG, or NQH.

Mileage: 135,000 miles

It features a 3.42 axle ratio (option code GU6). It is for vehicles equipped with an all-wheel drive single-speed transfer case (option code NR3).

Mileage: 240,600 miles

It is for vehicles with a 4.10 gear ratio (option code GT5) and without all-wheel drive.

For vehicles with a 3.73 axle ratio (option code GT4). Fits all-wheel drive models, including C3 and Denali trim levels. Compatible with vehicles featuring option codes NP3, NR3, or NR4.

Mileage: 180,800 miles

It is a front axle carrier assembly with a 3.08 gear ratio (option code GU4). It fits vehicles with transfer case options NP0, NQG, or NQH.

Mileage: 196,000 miles

It features a 3.23 gear ratio (option code GU5).

Mileage: 17,900 miles

For vehicles with a 4.10 gear ratio (option code GT5).

Mileage: 151,900 miles

For vehicles with all-wheel drive and a single-speed transfer case (option code NR3).

Mileage: 187,900 miles

Mileage: 165,000 miles

It is a rear carrier assembly for vehicles with a 3.49 gear ratio and an electronic locking differential (E-LOCK).

It features a 3.23 gear ratio and a mechanical limited-slip differential (option code G86).

Mileage: 83,000 miles

For vehicles with a 3.42 axle ratio (option code GU6). Fits vehicles with option code NP3, NR3, or NR4.

For vehicles with a 3.23 axle ratio (option code PZ).

For vehicles with a 3.08 gear ratio and option code RCU.

Mileage: 197,400 miles

For vehicles with a 4.10 gear ratio (option code GT5). This part fits all-wheel drive (AWD) vehicles. It is compatible with vehicles featuring option codes NP3, NR3, or NR4.

Mileage: 154,400 miles

For vehicles with a 3.23 gear ratio and an electronic locking differential (option code G96).

Mileage: 37,000 miles

This is a remanufactured carrier assembly. It features a 3.73 gear ratio (option code GT4). This part does not include the shift actuator motor. It comes with a 1-year unlimited mileage warranty.

This is a remanufactured carrier assembly. It features a 3.73 gear ratio (option code GT4). This part comes with a one-year unlimited mileage warranty.

This is a remanufactured part. This is an all-wheel drive single speed transfer case (option code NR3). It does not include the shift actuator motor.

This is a remanufactured carrier assembly. It does not include the shift actuator motor. This part is for vehicles with a 3.42 axle ratio (option code GU6) and is for vehicles without all-wheel drive.

It features a 3.23 gear ratio and a mechanical limited-slip differential (option code G86). This part fits vehicles with the 5.3L engine.

Mileage: 65,000 miles

This is a remanufactured carrier assembly. This part does not include the shift actuator motor. It is compatible with vehicles featuring transfer case options NP0, NQG, or NQH, and a 3.08 gear ratio (option code GU4).

This is a remanufactured carrier assembly. This is an AWD single-speed transfer case (option code NR3). It does not include the shift actuator motor.

This is a remanufactured part. It features a 3.42 axle ratio (option code GU6). This unit includes a 2-year unlimited mile parts and labor warranty. The right inner axle shaft housing has two shift actuating switches. You may need to switch the front axle shift actuator and harness to match your vehicle, as two, three, and five-way connectors are available.

This is a remanufactured part. It features a 4.10 gear ratio (option code GT5). This part is for vehicles without all-wheel drive (AWD).

This is a remanufactured part. It features a 3.73 gear ratio (option code GT4). This unit includes a 2-year unlimited mile parts and labor warranty. The right inner axle shaft housing has two shift switches. You may need to switch the front axle shift actuator and harness to match your vehicle's two, three, or five-way connectors.

This is a remanufactured part. It includes a 2-year unlimited mile parts and labor warranty. This carrier assembly features a 4.10 gear ratio (option code GT5). This part includes the carrier and axles only. Built for all-wheel drive (AWD) vehicles with the classic style body (creased door skin) and option codes NP3, NR3, or NR4.

This is a remanufactured part. It includes a 2-year unlimited mile parts and labor warranty. This part features a 3.23 gear ratio and is a non-locking (NL) type. There is a $400 core charge.

This is a remanufactured part. It features a 4.10 gear ratio (option code GT5).

This is a remanufactured part. It includes a 2-year unlimited mile parts and labor warranty. This part features a 3.23 gear ratio (option code GU5).

This is a remanufactured part. It features a 3.42 axle ratio (option code GU6). This part includes a 2-year unlimited mile parts and labor warranty.