GMC Sierra 3500 HD Drive Axle Shaft Replacement

This is the axle shaft assembly.

Mileage: 97,600 miles

This is the front axle shaft assembly.

Mileage: 97,600 miles

For vehicles with 8-lug wheels and a crew cab. This part is available with an optional protective cover (option code 8T7).

Mileage: 183,400 miles

For vehicles with 8-lug wheels and a Crew Cab body style. This part is available for vehicles with an optional protective cover (option code 8T7).

Mileage: 183,400 miles

Mileage: 133,000 miles

Mileage: 108,100 miles

This axle shaft fits both sides of the vehicle.

Mileage: 73,000 miles

Mileage: 153,000 miles

This axle shaft fits both sides of the front axle.

Mileage: 126,000 miles

It fits both sides of the vehicle. This part is for the front axle.

Mileage: 75,000 miles

It fits both sides of the front axle.

Mileage: 19,000 miles

It features a 35.51-inch shaft length (902mm). It is compatible with vehicles equipped with an 11.5-inch ring gear and brake option code JH6.

It features a 35.51-inch (902mm) shaft length. It is designed for vehicles with an 11.5-inch ring gear and brake option code JH6.

For four-wheel drive (4X4) vehicles with dual rear wheels (DRW) and wide track (option code GTY). This part includes both sides.

Mileage: 74,000 miles

This part includes both sides.

Mileage: 74,000 miles

For vehicles with a 6.6L engine and an 11.50 inch ring gear. Fits vehicles with active brake control (option code JL4), a fill plug in the cover, and single rear wheels (SRW).

For vehicles with the 6.6L engine and automatic overdrive transmission. Fits models with 8-lug wheels and Crew Cab body style. This axle shaft was available with an optional protective cover (option code 8T7).

Mileage: 160,000 miles

with 30 Splines with 34.25in Shaft Length with GM 8.5 & 8.6 Axles

It fits vehicles with dual rear wheels (DRW) and a wide track axle.

For vehicles with dual rear wheels (DRW) and a wide track.

with 33 Splines with GM 9.5 Axle

with 30 Splines with 35.95in Shaft Length with GM 11.5 Axle

11.5 In. Ring Gear 9,900 Lb. GVW Does Include Bearing, Seal, or Hardware Positraction

37.25 in. long; 8 x 3.818 in. bolt pattern~GM 11.5 in.

Cut-to-length design; fits 35 in. to 40.25 in. lengths; 8 x 3.818 in. bolt pattern~GM 11.5 in.

11.5 in.; 10.5 in. 14 Bolt; 30 Spline; 34.8 in. - 38.8 in. Cut To Length 11.5 in.; 10.5 in. 14 Bolt; 30 Spline; 34.8 in. - 38.8 in. Cut To Length