Ford Mustang Engine Harmonic Balancer Replacement

This part includes the pulley with a vibration damper.

Mileage: 80,000 miles

This part does not include the pulley. It fits vehicles with the 8th VIN digit W (Romeo engine) or X (SOHC GT).

Built for the US market. Verify your vehicle's 8th VIN digit is V.

Direct Replacement w/6 Rib Serpentine Belt

It does not include the pulley. This part fits vehicles with the 5.0L 8-cylinder engine (302). It is for Federal emissions vehicles and does not fit Boss models. Built for vehicles with a VIN starting from BG0001 and manufactured through December 2, 1979.

It is compatible with California emissions models.

Mileage: 147,000 miles

It includes the pulley with a vibration damper. This part fits Mach 1 models.

4 Hole Aftermarket Billet Aluminum Spacer; For PRW FluidGel(TM) Dampers; Black Anodized

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.81 in ATP Number: 102018 ATP Availability: Available to Order Pioneer Number: DA-2801 Pioneer Availability: Available to Order

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.81 in

It fits vehicles with the 3.5L turbocharged engine.

Mileage: 267,000 miles

For vehicles with the 4.0L SOHC V6 engine. Per Ford requirements, a new bolt is mandatory for vehicles built from 6/25/07.

Mileage: 99,000 miles

For vehicles with the 5.0L engine. Fits GT and California Special models.

Mileage: 99,000 miles

It fits vehicles with the 4.6L 3-valve engine. Built for the US market. Verify your vehicle's 8th VIN digit is 8.

Mileage: 99,000 miles

For Vehicles W/ Weighted Spacer Behind Balancer Part Type: Solid Outer Diameter: 6.50 in ATP Number: 102011 ATP Availability: Available to Order Pioneer Number: DA-4601 Pioneer Availability: Available to Order

Description: For Vehicles W/ Weighted Spacer Behind Balancer Part Type: Solid Outer Diameter: 6.50 in

4 Bolt Hub; W/ 50 oz Weight Part Type: Solid Outer Diameter: 6.41 in ATP Number: 102014 ATP Availability: Available to Order ATP Supersession: Replaces 102012 Pioneer Number: DA-3021 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3023

Description: 4 Bolt Hub; W/ 50 oz Weight Part Type: Solid Outer Diameter: 6.41 in Supersession: Replaces DA-3023

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 7.05 in ATP Number: 102272 ATP Availability: Superseded ATP Supersession: Replaced by 102321 Pioneer Number: N/A Pioneer Availability: N/A ATP: Discontinuation / supersession date: 2024-06-03 ATP: Obsolete On: 2026-06-03 ATP: LifeCycle Change Log: Went from 9 (Obsolete) to 7 (Superseded)

Direct Replacement

Description: Groove Qty. 6, 6 Part Type: Double Serpentine Outer Diameter: 7.03 in

3 Bolts Hub Part Type: Solid Outer Diameter: 6.50 in ATP Number: 102008 ATP Availability: Available to Order Pioneer Number: DA-289 Pioneer Availability: Available to Order

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.81 in

Description: 3 Bolts Hub Part Type: Solid Outer Diameter: 6.50 in

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.54 in Supersession: Replaces DA-7007

Direct Replacement

3 bolt w/counterweight & raised pulley

Direct Replacement

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.51 in

Direct Replacement

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.10 in ATP Number: 102251 ATP Availability: Available to Order Pioneer Number: DA-3998 Pioneer Availability: Available to Order

Direct Replacement

6.40 in. OD; 28 oz. External Balance; Removable C/Weight; Black

Street Version

6.40 in. OD; 50 oz. External Balance; Removable C/Weight; Black

Single Groove Pulley

It fits front-wheel drive vehicles with a 2.0L engine and automatic transmission. Ford service states it is mandatory to replace the attaching bolt when this part is installed. Do not pull the harmonic balancer unless absolutely necessary because the lower timing gear is not keyed to the crankshaft. If the motor is spun over with the harmonic balancer off, the valve timing will be thrown off and cause bent valves.

Description: 3-3/4 In Hub Height Part Type: Solid Outer Diameter: 6.062 in

Cannot reuse TTY mounting

Street Version w/6 Rib Serpentine Belt

6.50 in. OD; 0 Balance; Black

3.75 Hub Height

Part Type: Solid Outer Diameter: 7.01 in ATP Number: 102137 ATP Availability: Available to Order Pioneer Number: DA-390 Pioneer Availability: Available to Order

SFI Spec 18.1; Steel/Elastomer; External Balance; 6.40 in. OD; Removable C/Weight; 50 Oz.; Black

Dual Groove Pulley

6.54 in. OD; 50 Oz.; Removable Hub; External Balance; Black

6.40 in. OD; 28 oz. External Balance; Lightweight; Black

SFI Spec 18.1; Steel/Elastomer; External Balance; 6.40 in. OD; Removable C/Weight; 28 Oz.; Black

6.40 in. OD; 50 Oz.; Lightweight; Black

7.25 in. OD; Neutral Balance; 4 Bolt Pulley; Keyway Matching May Be Required For OEM/Aftermarket Cranks; Black

6.40 in. OD; Neutral Balance; Removable C/Weight; Standard Weight; Black

25 Percent UnderDrive; Black; [Available While Supplies Last]

6.54 in. OD; Zero Balance For Aftermarket Cranks; Internal Balance; Black

6.54 in. OD; 28 Oz; Removable Hub; External Balance; Pulley Spacers May Be Required 1975-Up Engines; Black

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: External (28 oz) Finish: No Finish Keyway: Single Length: 3.33 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Safety Rating: Non SFI Approval WT. in lbs.()=Rotating weight: 11.0 (7.8 Rwt) 4 bolt standard Ford pulley bolt pattern. Externally balanced-28oz. Not recommended for 302HO Pulley spacer PN 717656 may be required Recommend painting with high temperature engine paint to prevent rust.

SFI Spec 18.1; Steel/Elastomer; Zero Internal Balance; 6.50 in. OD; Black

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.81 in

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.50 in w/28oz. Counter Weight Hubs Street Performance Balancer

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 3.34 Material: Steel Mounting Hardware Incl.: No O.D.: 6-5/8" (6.625) Pulley Bolt Pattern: Pulley spacers may be required on some 1975-later engines. Custom pulleys may be Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 11.1 (7.4 Rwt) 4 bolt standard Ford pulley bolt pattern. Custom pulleys may be required Internally balanced. Replaces 28oz externally balanced.

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: External (28 oz) Finish: Black Zinc Keyway: Single Length: 3.34 Material: Steel Mounting Hardware Incl.: No O.D.: 6-5/8" (6.625) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 12.5 (8.3 Rwt) 4 bolt standard Ford pulley bolt pattern. Externally balanced-28oz. Recommend painting with high temperature engine paint to prevent rust.

Description: 3 Bolts; W/ Counterweight & Raised Pulley Part Type: Solid Outer Diameter: 6.50 in

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 3.95 Material: Steel Mounting Hardware Incl.: No O.D.: 6-5/8" (6.625) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 11.8 (7.9 Rwt) Internally balanced. Replaces 34oz. externally balanced.

Description: 3 Bolt Hub; W/ Counterweight & Counter Sunk Pulley Part Type: Solid Outer Diameter: 6.5 in

Description: 4 Bolts Part Type: Solid Outer Diameter: 6.62 in

3 Bolts; W/ Counterweight & Raised Pulley Part Type: Solid Outer Diameter: 6.50 in ATP Number: 102029 ATP Availability: Discontinued Pioneer Number: 872008 Pioneer Availability: Available to Order ATP: Discontinuation / supersession date: 2020-11-24 ATP: Obsolete On: 2022-11-24 ATP: LifeCycle Change Log: Available to Order -> Discontinued ATP: LifeCycle Ticket Log: JNP-18368

Description: Neutral Balance Part Type: Solid Outer Diameter: 5.79 in

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 50 degree BTDC to 10 degree ATDC. Additional timing/degree marks at 90, 180 and Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.385 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/4" (7.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 12.2 (8.2 Rwt) 385-SERIES BIG BLOCK

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.36 in

Description: W/ 50 oz Weight Part Type: Solid Outer Diameter: 6.36 in

Description: Hub Weighted Part Type: Solid Outer Diameter: 6.5 in w/28oz. Counter Weight Hub & Raised Pulley Location Performance Race (SFI) Harmonic Balancer

7.75 in. 8 Rib Incl. Hardware