Ford Fusion Engine Harmonic Balancer Replacement

It includes the pulley with a vibration damper.

Mileage: 99,000 miles

It is a pulley with a vibration damper.

Mileage: 160,000 miles

It is a harmonic balancer for vehicles with the 2.5L DOHC engine. Built for vehicles where the 8th digit of the VIN is 7.

Mileage: 99,000 miles

Mileage: 99,000 miles

Compare your retaining bolt before installation; you may need a new bolt (part number 1S7Z-6A340-AA) to install this part. WARNING: Do not remove the harmonic balancer unless absolutely necessary, as the lower timing gear is not keyed to the crankshaft. If the motor is turned while the balancer is off, the valve timing will be lost and may cause bent valves.

Mileage: 95,000 miles

Description: Groove Qty. 6, 4 Part Type: Double Serpentine Outer Diameter: 76.28in Large Pulley; 5.88 in Small Pulley

This harmonic balancer (pulley with vibration damper) is for vehicles with a 1-belt system.

Mileage: 99,000 miles

For vehicles with the 1.5L, 1.6L, or 1.6L turbo engine.

Mileage: 99,000 miles

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.511 in ATP Number: 102117 ATP Availability: Available to Order Pioneer Number: DA-1822 Pioneer Availability: Available to Order

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.511 in

It fits front-wheel drive vehicles with a 2.0L engine and automatic transmission. Ford service states it is mandatory to replace the attaching bolt when this part is installed. Do not pull the harmonic balancer unless absolutely necessary because the lower timing gear is not keyed to the crankshaft. If the motor is spun over with the harmonic balancer off, the valve timing will be thrown off and cause bent valves.