Ford F-150 Suspension Control Arm Replacement

w/ Dual Shock

Production: -06/23/2015

Production: -06/23/2015

w/ Base Payload Package

w/ Base Payload Package

Production: -06/23/2015

Production: -12/15/2014

Production: -12/15/2014

w/ Base Payload Package

Production: -12/15/2014

w/ Base Payload Package

Production: -12/15/2014

w/ Base Payload Package

w/ Heavy Duty Payload Package

Production: -12/15/2014

Pair; 1-3 in. Front Lift

These upper arms are designed to work with Fox Coilovers, Zone 2" Strut Spacer, or 6" Zone IFS Lift. They may not work with all spacer kits available. Check for upper ball joint to coil clearance before installation of the arms. If the factory arm in the balljoint area hits the factory coil, or has less than 1/8" of clearance, the arms will not fix the problem. A different aftermarket strut spacer or replacement Fox coilover are recommended.

Ridetech 2015+ Ford F150 2WD and 4WD Front Upper StrongArms

Pair; 2-3 in. w/HD Ball Joints And Bushings Does Not Fit w/Regular/Standard Cab Models~Fits Models w/Ride Height Sensor

USES VULCANIZED RUBBER BUSHINGS & A FACTORY LIKE BALL JOINT DOES NOT HAVE ANY ALIGNMENT CORRECTIONS BUILT INTO IT AS NONE ARE NEEDED FOR THIS APPLICATION MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

with ICON Steering Knuckles with 3.5 (in) - 4.5 (in) Suspension Lift without Continuously Controlled Damping (CCD) System Use Up To 34 (in) x 12.50 (in) Tires without Factory Installed Wheels 6 (mm) Offset Aftermarket Wheels Recommended

without Factory Installed Wheels with 0 (in) - 3 (in) Suspension Lift Use Up To 33 (in) x 11.50 (in) Tires ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset