Ford F-150 Drive Shaft Replacement

Tagged E8TW4A376CA, E8TW4A376CB

8.8 In. Axle

8.8 In. Axle

with 78.50 (in) Long Driveshaft with 132.5 (in) Wheelbase Measurement taken from end of flange face to end of input shaft Supplied as New

with 30.04 (in) Long Driveshaft 1330 Series with 3 5/8" Diameter Joint on Both Ends Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

8.8 In. Axle

with 31.65 (in) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

From 9/19/11

8.8 In. Differential w/10 Bolt Cover

New Body Style; 8.8 In. Rear Axle w/10 Bolt Differential Cover

with 30.47 (in) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

w/ 9.75" Axle

Tagged F85W4602EA

9.75 In. Axle

2 Piece Shaft Assembly

8.8 In. Axle

w/ 9.75" Axle

7,700 Lb. GVW

8.8 In. Axle

8.8 In. Rear Axle w/10 Bolt Differential Cover

10.25 In. Axle w/12 Bolt Differential Cover

9.75 In. Axle

1356 Transfer Case From 1/92

8.8 In. Rear Axle w/10 Bolt Cover

10 Bolt Differential Cover 8.8 In. Axle

8.8 In. Rear Axle w/10 Bolt Differential Cover

9.75 In. Axle w/12 Bolt Differential Cover

10.25 In. Rear Axle w/12 Bolt Differential Cover

8.8 In. Axle w/10 Bolt Differential Cover

9.75 In. Axle w/12 Bolt Differential Cover

7,700 Lb. GVW

8.8 In. Rear Axle w/10 Bolt Differential Cover

8.8 In. Axle

7,700 Lb. GVW

9.75 In. Axle w/12 Bolt Differential Cover

Tagged F2TW4602BA

2 Piece Shaft Assembly

AODE Transmission

with 50.67 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New

with 88.90 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New

8.8 In. Axle

9.75 In. Axle

8.8 In. Axle

Tagged F2TA4K145CA, F1TA4K145AA

9.75 In. Axle

10 Bolt Differential Cover 8.8 In. Axle

w/4.10 Axle Ratio

2 Piece Shaft with 84.84 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New

2 Piece Shaft with 89.45 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New

Harley-Davidson Edition Submodel

9.75 In. Rear Axle w/12 Bolt Cover

9.75 In. Rear Axle w/12 Bolt Cover

2 Piece Shaft with 89.09 (in) Long Driveshaft with 9.75 (in) Ring Gear Measurement taken from end of flange face to end of input shaft Supplied as New

8.8 In. Axle w/10 Bolt Differential Cover

2 Piece Shaft with 90.75 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New

w/9.75 In. Axle

2 Piece Shaft with 87.60 (in) Long Driveshaft with 10.25 (in) Ring Gear Measurement taken from end of flange face to end of input shaft Supplied as New

9.75 In. Rear Axle

9.75 In. Axle w/12 Bolt Differential Cover

w/Federal Emissions

8.8 In. Rear Axle w/10 Bolt Cover

10 Bolt Differential Cover 8.8 In. Differential

ID No. 4R602

2 Piece Shaft Assembly