Ford F-150 Drive Axle Shaft Seal Replacement

(8.8" R.G.)

Dana 44 3.256 in. O.D.~Dana 44; Standard Rotation; Front

559 Or 6408 Bearing; Not Coarse Spline Ford 8.8 in.; 559 Or 6408 Bearing; Not Coarse Spline

Ford 10.25 in./10.5 in. Ford 10.25/10.5 in.; Full Float Axle Shaft O-Ring

1.811 Shaft Diameter 2.870 Bore Diameter 2.874 Outside Diameter Seal 0.393 Width

Replacement Seal; Use w/Straight Axle Dana 44; Reverse Rotation; Straight Axle; Replacement Seal; Use w/Straight Axle~Dana 44; Standard Rotation; Replacement Seal; Use w/Straight Axle

Replacement Dana 44; IFS; Replacement

1.301 Shaft Diameter 2.621 Bore Diameter 2.625 Outside Diameter Seal 1.331 Width

1.688 Shaft Diameter 2.551 Bore Diameter 2.556 Outside Diameter Seal 0.470 Width

FAG Global Number 413 2359 100

1.438 Shaft Diameter 2.250 Bore Diameter 2.254 Outside Diameter Seal 0.313 Width

with 8.5 (in) Ring Gear with Spicer 44 Axle Independent Front Suspension

with 8.5 (in) Ring Gear with Spicer 44 Axle Independent Front Suspension

Dana/Spicer 44 - Independent Front Suspension

FAG Global Number 413 2738 100 1.688" Shaft

Dana 44 Reverse/44/50/35; AMC 35 Reverse Left Inner Dana 44; IFS; Front Left Inner

FAG Global Number 413 2495 100

Replaces OE Part Number(s) E4TZ-3254-A, E4TZ-3254-B with Dana 44 Axle with Reverse Rotation

with 8.5 (in) Ring Gear with Spicer 44 Axle Independent Front Suspension

Dana/Spicer 44 - Independent Front Suspension

Dana/Spicer 44 - Independent Front Suspension

Intermediate Shaft

7.5 in./9 in. 10 Bolt; 9.75 in. 12 Bolt; 8 in./7.25 in. 8.8 in. Reverse; AMC 35 Reverse Ford 8.8 in.; Reverse

9.75 in., 10.25 in. Ring Gear

9 in. 10 Bolt Outer Ford 9 in.; Rear Outer

FAG Global Number 413 2861 100

Viton Type with 8.8 (in) Ring Gear Independent Front Suspension

From Chassis #M30001 FAG Global Number 413 2365 100 1.313" I.D.

Axle Shaft to Spindle

AMC 20; For Use with Set 10 Bearing Dana 44; For Use with Set 10 Bearing

(8.8" R.G.)(Indep. Frt. Susp.) Intermediate

FAG Global Number 413 2860 100

with 8.5 (in) Ring Gear with Spicer 44-7F Axle

For Use w/Semi-Float Ford 8.8 in.; For Use w/Semi-Float~Ford 9.75 in.; For Use w/Semi-Float

Intermediate Shaft

1.811 Shaft Diameter 2.874 Bore Diameter 2.883 Outside Diameter Seal 0.413 Width

with Ford 8.8 Axle

1.313 Shaft Diameter 2.620 Bore Diameter 2.625 Outside Diameter Seal 1.281 Width

2.502" OD, 1.5" ID, .437" Wide

with Dana 44 Axle

FAG Global Number 413 2850 100

FAG Global Number 413 2367 100 2.625" O.D.

Viton Type with 8.8 (in) Ring Gear Independent Front Suspension

8.8 in. 10 Bolt; 9.75 in./10.25 in./12 Bolt; 10.5 in. 14 Bolt; 8.85 in. Reverse; Dana 50 Ford 8.8 in.; Reverse

10.25 in. 12 Bolt; For Use w/Full Float Ford 10.25 in.; For Use w/Full Float

Redi Sleeve Dana 44; Standard Rotation~front axle inner seal redi-sleeve

Dana 44; Two Piece Hub Seal Dana 44; IFS; Two Piece Hub Seal

Axle Shaft to Spindle

For Use w/Dana 30/44/60; No Return Inner axle side seal installation tool