Ford Explorer Engine Harmonic Balancer Replacement

This part includes the pulley with a vibration damper.

Mileage: 80,000 miles

This fits as a service replacement part.

It fits vehicles with the 4.0L SOHC engine. It is not for Sport Trac models. Built for the US market; verify your vehicle's 8th VIN digit is E.

Mileage: 99,000 miles

Direct Replacement To 10/12/07

Description: Groove Qty. 6, 4 Part Type: Double Serpentine Outer Diameter: 76.28in Large Pulley; 5.88 in Small Pulley

It fits vehicles with the 3.5L turbocharged engine.

Mileage: 267,000 miles

This harmonic balancer (pulley with vibration damper) is for vehicles with a 1-belt system.

Mileage: 99,000 miles

For vehicles with the 4.0L SOHC V6 engine. Per Ford requirements, a new bolt is mandatory for vehicles built from 6/25/07.

Mileage: 99,000 miles

It fits vehicles with the 4.6L 3-valve engine. Built for the US market. Verify your vehicle's 8th VIN digit is 8.

Mileage: 99,000 miles

Mileage: 99,000 miles

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 7.05 in ATP Number: 102272 ATP Availability: Superseded ATP Supersession: Replaced by 102321 Pioneer Number: N/A Pioneer Availability: N/A ATP: Discontinuation / supersession date: 2024-06-03 ATP: Obsolete On: 2026-06-03 ATP: LifeCycle Change Log: Went from 9 (Obsolete) to 7 (Superseded)

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.00 in ATP Number: 102028 ATP Availability: Available to Order Pioneer Number: DA-244 Pioneer Availability: Available to Order

Direct Replacement

Mileage: 99,000 miles

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.10 in ATP Number: 102251 ATP Availability: Available to Order Pioneer Number: DA-3998 Pioneer Availability: Available to Order

It fits front-wheel drive vehicles with a 2.0L engine and automatic transmission. Ford service states it is mandatory to replace the attaching bolt when this part is installed. Do not pull the harmonic balancer unless absolutely necessary because the lower timing gear is not keyed to the crankshaft. If the motor is spun over with the harmonic balancer off, the valve timing will be thrown off and cause bent valves.

Cannot reuse TTY mounting

From 9/04/12

25 Percent UnderDrive; Black; [Available While Supplies Last]

6.54 in. OD; Zero Balance For Aftermarket Cranks; Internal Balance; Black

6.54 in. OD; 28 Oz; Removable Hub; External Balance; Pulley Spacers May Be Required 1975-Up Engines; Black

Description: Neutral Balance Part Type: Solid Outer Diameter: 5.79 in