Ford E-250 Econoline Engine Intake Manifold Replacement

This is the aluminum upper intake manifold only. It features injector bosses and is for vehicles with the Romeo engine.

Mileage: 99,000 miles

This is the upper intake manifold for vehicles with the 5.0L engine.

Mileage: 111,400 miles

This is the upper intake manifold for vehicles with the 7.5L engine.

Mileage: 138,000 miles

This is the upper section of the manifold.

Mileage: 99,000 miles

For vehicles with the 7.3L turbo diesel engine. Also fits vehicles with the 6.9L (8-420) or 7.3L (8-445) diesel engines.

Mileage: 84,300 miles

For vehicles with the 5.0L engine. This is the lower intake manifold.

Mileage: 53,900 miles

It fits vehicles without the supercharged option.

Mileage: 263,900 miles

Mileage: 314,000 miles

1 Piece Design

1 Piece Designed Specifically to Work w/Dorman OE Solutions Intake Manifold Gaskets Only Exc. Coolant Heated PCV

Single Plane Type; Length: 508mm

ATP Number: 106010 ATP Availability: Available to Order Pioneer Number: N/A Pioneer Availability: N/A

Cast Finish 4 bbl Carb Non-EGR Idle-5500 rpm Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps

Cast Finish 4 bbl Carb Non-EGR 1500-6500rpm Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps

Cast Finish 4 bbl Carb Non-EGR Idle-5500rpm Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Cast Finish 4 bbl Carb Non-EGR Idle-5500rpm For 4 bbl Carbs Valley Width 8.53125 in. Recommend Edelbrock Gasket PN[7265] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Black 4 bbl Carb Non-EGR Idle-5500 rpm Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps

Cast Finish 4 bbl Carb Non-EGR 1500-6500rpm Incl. Nitrous Bosses Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps

Built for the US market. Verify your vehicle's 8th VIN digit is W.

Mileage: 99,000 miles

Non-EGR 1500-6500rpm For 4 bbl Carbs w/Standard Or Cobra-Jet Cyl. Heads Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Satin Finish Non-EGR 1500-6500rpm For Stroker Engines For 4 bbl Carbs Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Idle-5500rpm For 2 Or 4 bbl Carbs Off Road For Off-Highway Non-EGR Apps Use PN[8714] Spacer~ Recommend Edelbrock Gasket PN[7265] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Black Finish 4 bbl Carb Non-EGR 1500-6500rpm Incl. Nitrous Bosses Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps

Black Finish 4 bbl Carb Non-EGR Idle-5500rpm Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Polished Finish 4 bbl Carb Non-EGR Idle-5500 rpm Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps

Cast Finish Non-EGR 1500-6500rpm Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Polished Finish Non-EGR 1500-6500rpm For Stroker Engines For 4 bbl Carbs No Provisions For Choke Or Rear Water Crossover~ Use 12-Bolt Intake Gasket Set Recommend PN[7220]~ Recommend Edelbrock Gasket PN[7265] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles