Ford E-250 Econoline Electric Fuel Pump Replacement

Rear Tank Can Only Be Used If The Original Ford Module Has Been Replaced Plastic Module Height Is Approx. 4" When Replacing The Pump Only Both Strainers Are Required Includes Tank Seal Strainer required to validate the warranty: F316S, F300S

2 Pump System Requires In-Tank & In-Line Pump

Low Pressure Pump In-Tank Pump Includes Tank Seal Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally Strainer required to validate the warranty: F123S

Includes Tank Seal Strainer required to validate the warranty: F298S, F276S

With 3 tube ports After Axle Fuel Tank

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

Strainer required to validate the warranty: F111S

After Axle or midship Fuel Tank

Universal 12 Volt 5 to 9 pounds of pressure. Requires 3" x 5" Mounting Area

With 2 tube ports. After Axle or Midship Fuel Tank.

In-line; External High Pressure Pump, 2 Fuel Pumps may be required (1 Externally Mounted & 1 Mounted in Tank)

In-Tank Pump; 2 Fuel Pumps May Be Required; 1 Mounted In-Tank & 1 Externally Mounted Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty

To be used with OE Style Modules only

with Wide Terminals Platinum Pro Part New Strainer Required For Warranty

Externally Mounted High Pressure Pump Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

(Universal Inline) (12 Volt 4 to 6 PSI) Requires 3" x 6" Mounting Area

Platinum Pro Part New Strainer Required For Warranty

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34

Externally mounted

Externally Mounted High Pressure Pump Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

with Aft Axle Tank with Midship Tank Used to Service Modules With Ford OEM Module Style Connector

Platinum Pro Part New Strainer Required For Warranty

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

Electric Replacement for Mechanical When converting from OE mechanical pump to inline electric system an additional inline fuel pressure regulator may be required to maintain proper line pressure

externally mounted; Platinum Pro Part 2 Fuel Pumps may be Required

Can only be used w/o OEM Ford Module

To be used with OE Style Modules only

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

Aft Axle Fuel Tank DENSO Fuel Pump

with Aft Axle Tank with Midship Tank Used to Service Modules With Ford OEM Module Style Connector

with Aft Axle Tank