Ford Bronco Engine Harmonic Balancer Replacement

It features a serpentine pulley.

Mileage: 187,000 miles

Mileage: 146,000 miles

It does not include the pulley. This part fits vehicles with the 5.0L 8-cylinder engine (302). It is for Federal emissions vehicles and does not fit Boss models. Built for vehicles with a VIN starting from BG0001 and manufactured through December 2, 1979.

Direct Replacement

It is compatible with gasoline engines and Federal emissions standards.

Mileage: 99,000 miles

4 Hole Aftermarket Billet Aluminum Spacer; For PRW FluidGel(TM) Dampers; Black Anodized

wo/California Emissions

w/Single Serpentine Belt

4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.40 in ATP Number: 102017 ATP Availability: Available to Order Pioneer Number: DA-3513 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-7003

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.40 in Supersession: Replaces DA-7003

4 Bolt Hub; W/ 50 oz Weight Part Type: Solid Outer Diameter: 6.41 in ATP Number: 102014 ATP Availability: Available to Order ATP Supersession: Replaces 102012 Pioneer Number: DA-3021 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3023

Description: 4 Bolt Hub; W/ 50 oz Weight Part Type: Solid Outer Diameter: 6.41 in Supersession: Replaces DA-3023

Direct Replacement

3 Bolts Hub Part Type: Solid Outer Diameter: 6.50 in ATP Number: 102008 ATP Availability: Available to Order Pioneer Number: DA-289 Pioneer Availability: Available to Order

Description: 3 Bolts Hub Part Type: Solid Outer Diameter: 6.50 in

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.54 in Supersession: Replaces DA-7007

Direct Replacement

3 bolt w/counterweight & raised pulley

Mileage: 99,000 miles

Direct Replacement

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.51 in

Direct Replacement

Supersession: Renumbered from DA-3512-HD

Direct Replacement

6.40 in. OD; 28 oz. External Balance; Removable C/Weight; Black

Street Version

6.40 in. OD; 50 oz. External Balance; Removable C/Weight; Black

Single Groove Pulley

It fits front-wheel drive vehicles with a 2.0L engine and automatic transmission. Ford service states it is mandatory to replace the attaching bolt when this part is installed. Do not pull the harmonic balancer unless absolutely necessary because the lower timing gear is not keyed to the crankshaft. If the motor is spun over with the harmonic balancer off, the valve timing will be thrown off and cause bent valves.

Mileage: 209,000 miles

SFI Spec 18.1; Steel/Elastomer; External Balance; 6.40 in. OD; Removable C/Weight; 50 Oz.; Black

Dual Groove Pulley

SFI Spec 18.1; Steel/Elastomer; External Balance; 6.40 in. OD; Removable C/Weight; 28 Oz.; Black

6.40 in. OD; 28 oz. External Balance; Lightweight; Black

6.40 in. OD; 50 Oz.; Lightweight; Black

7.25 in. OD; Neutral Balance; 4 Bolt Pulley; Keyway Matching May Be Required For OEM/Aftermarket Cranks; Black

6.40 in. OD; Neutral Balance; Removable C/Weight; Standard Weight; Black

6.54 in. OD; Zero Balance For Aftermarket Cranks; Internal Balance; Black

6.54 in. OD; 28 Oz; Removable Hub; External Balance; Pulley Spacers May Be Required 1975-Up Engines; Black

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: External (28 oz) Finish: No Finish Keyway: Single Length: 3.33 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Safety Rating: Non SFI Approval WT. in lbs.()=Rotating weight: 11.0 (7.8 Rwt) 4 bolt standard Ford pulley bolt pattern. Externally balanced-28oz. Not recommended for 302HO Pulley spacer PN 717656 may be required Recommend painting with high temperature engine paint to prevent rust.

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.50 in w/28oz. Counter Weight Hubs Street Performance Balancer

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 3.34 Material: Steel Mounting Hardware Incl.: No O.D.: 6-5/8" (6.625) Pulley Bolt Pattern: Pulley spacers may be required on some 1975-later engines. Custom pulleys may be Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 11.1 (7.4 Rwt) 4 bolt standard Ford pulley bolt pattern. Custom pulleys may be required Internally balanced. Replaces 28oz externally balanced.

Bore Dia. Min/Max: 1.374 / 1.375 Degree Marking Range: 2 degree increments, 50 BTDC to 10 ATDC Degree Markings: Yes Engine Balance: External (28 oz) Finish: Black Zinc Keyway: Single Length: 3.34 Material: Steel Mounting Hardware Incl.: No O.D.: 6-5/8" (6.625) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 12.5 (8.3 Rwt) 4 bolt standard Ford pulley bolt pattern. Externally balanced-28oz. Pulley spacer PN 717656 may be required Recommend painting with high temperature engine paint to prevent rust.

Description: 3 Bolts; W/ Counterweight & Raised Pulley Part Type: Solid Outer Diameter: 6.50 in

3 Bolts; W/ Counterweight & Raised Pulley Part Type: Solid Outer Diameter: 6.50 in ATP Number: 102029 ATP Availability: Discontinued Pioneer Number: 872008 Pioneer Availability: Available to Order ATP: Discontinuation / supersession date: 2020-11-24 ATP: Obsolete On: 2022-11-24 ATP: LifeCycle Change Log: Available to Order -> Discontinued ATP: LifeCycle Ticket Log: JNP-18368

Description: Neutral Balance Part Type: Solid Outer Diameter: 5.79 in

Description: 4 Bolt Hub; W/ 28 oz Weight Part Type: Solid Outer Diameter: 6.36 in

Description: W/ 50 oz Weight Part Type: Solid Outer Diameter: 6.36 in

Description: Hub Weighted Part Type: Solid Outer Diameter: 6.5 in w/28oz. Counter Weight Hub & Raised Pulley Location Performance Race (SFI) Harmonic Balancer