Dodge Ram 3500 Leaf Helper Spring Replacement

2 in.; Incl. Center Pins; Pair

Rear Add-a-Leafs Wheel Drive: 4WD

1,300 Lb. Average Capacity 1.50 In. Pack Thickness 2 Leaf / 1 Pad

Lift Height 1-1.5 in.; w/Tie Bolts; Pair

Lift Height 3 in.; w/Tie Bolts; Pair

2 in.; Incl. Center Pins; Pair

1,110 Lb. Average Capacity 1.375 In. Pack Thickness 2 Leaf / 1 Pad

With factory contact overload springs.

3 in.; Incl. Center Pins; Pair

Lift Height 2 in.; w/Tie Bolts; Pair

Pickup With Factory Contact Overload Leaf Springs

Rear 4 X 4 For pickup models only Do not use on chassis cab models May be used on trucks equipped with top overload spring

Rear 4 X 2 May be used on trucks equipped with top overload spring

Lift Height 4 in.; w/Tie Bolts; Pair

2500 lbs. Capacity; 3 Leaf Stack; Do Not Use w/ Factory Overload Contact Springs

Rear 4 X 4 Do not use on trucks equipped with a top overload spring MXKT (sold separately)

Rear 4 X 4 For chassis cab models only Do not use on pickup models May be used on trucks equipped with top overload spring PSP-11 (included)

Rear 4 X 4 For chassis cab models only Do not use on pickup models May be used on trucks equipped with top overload spring

Rear 4 X 2 Do not use on trucks equipped with a top overload spring MTKT (sold separately)

Rear 4 X 4 May be used on trucks equipped with top overload spring

Rear 4 X 2 For cutaway models only Do not use on van models

Rear 4 X 2 For chassis cab models only Do not use on pickup models May be used on trucks equipped with top overload spring

3500 lbs. Capacity; 4 Leaf Stack; Do Not Use w/Factory Overload Contact Springs; Do Not Use w/ Factory Overload Contact Springs

Rear 4 X 2 For cutaway models only Do not use on van models

Rear 4 X 2 For cutaway models only Do not use on van models

2WD/4WD Pickup Must remove factory overload contact springs - removal of contact overload springs may require U-bolt and center bolt replacement.

Up to 2500 lbs. load assist; 3 Leaf Stack; 2 and 4 wheel drive; Pickup and Dually; Requires Mounting Kit PN[25250 Or 25300] sold separtately; Do Not Use w/ Factory Overload Contact Springs

Up to 3500 lbs. load assist; 4 Leaf Stack; Mounting Hardware Required;2.5 in. Wide Leaf Require PN[25250]; 3 in. Wide Require PN[25300] 2 and 4 wheel drive; must remove factory contact overload or use 9705

2WD/4WD Pickup incl Dually Must remove factory overload contact springs - removal of contact overload springs may require U-bolt and center bolt replacement or us Hellwig Contact Overload Helper Spring Part # 9705.

Rear 4 X 2 May be used on trucks equipped with top overload spring PSP-7 (included)

Rear 4 X 2 MXKT (sold separately)

Rear 4 X 4 May be used on trucks equipped with top overload spring

Rear 4 X 2 May be used on trucks equipped with top overload spring PSP-19 (included)

Rear 4 X 2 May be used on trucks equipped with top overload spring PSP-7 (included)

Rear 4 X 2 May be used on trucks equipped with top overload spring PSP-7 (included)

Rear 4 X 2 For pickup models only Do not use on chassis cab models Do not use on trucks equipped with a top overload spring MTKT (sold separately)

Rear; Self-Adjusting Suspension Stabilizing System; Provides 4000 lbs Additional Load Leveling Ability; Do Not Exceed GVWR; Incl. Poly Spring Pad Leaf Spring Dimensions 51L x 3W x 1.12~Poly Spring Pad PN[PSP-19] Included~With Factory Top Overload