Dodge Ram 3500 Engine Harmonic Balancer Replacement

Mileage: 150,000 miles

Mileage: 99,000 miles

For vehicles with a 5.7L or 6.4L gasoline engine and a 12-volt system (non-eTorque). Fits models with a single alternator. This part is not for vehicles with dual alternators or 380-amp dual alternators.

Mileage: 99,000 miles

Mileage: 115,700 miles

Groove Qty. 7 Part Type: Serpentine Outer Diameter: 7.22 in ATP Number: 102129 ATP Availability: Available to Order Pioneer Number: DA-3603 Pioneer Availability: Available to Order

Description: Groove Qty. 7 Part Type: Serpentine Outer Diameter: 7.22 in

For vehicles with the 5.9L diesel engine.

Direct Replacement

Direct Replacement

Groove Qty. 8 Part Type: Serpentine Outer Diameter: 9.25 in ATP Number: 102278 ATP Availability: Available to Order Pioneer Number: DA-3606 Pioneer Availability: Available to Order

Black Incl. 3 Counterweights 7.30 in. OD Internal/External Balance Steel/Elastomer SFI Spec 18.1

Bore Dia. Min/Max: NA Degree Markings: No Engine Balance: Internal Finish: Black Zinc Keyway: Drill pin kit #300002 recommended for high HP over 3000RPM Length: 2.661 Material: Steel Mounting Hardware Incl.: No O.D.: 9-3/4" (9.750) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 23.9 (15.9 Rwt)

Bore Dia. Min/Max: NA Degree Markings: No Engine Balance: Internal Finish: Black Zinc Keyway: Drill pin kit #300002 recommended for high HP over 3000RPM Length: 1.407 Material: Steel Mounting Hardware Incl.: No O.D.: 10-3/32" (10.093) Pulley Size: NO PULLEY - FOR COMPETITION USE Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 22.6 (15.1 Rwt)

Bore Dia. Min/Max: NA Degree Marking Range: 1 timing mark Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Drill pin kit #300002 recommended for high HP over 3000RPM Length: 2.506 Material: Steel Mounting Hardware Incl.: No O.D.: 9-1/4" (9.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 23 (15.4 Rwt)

Bore Dia. Min/Max: NA Degree Marking Range: 1 timing mark Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Drill pin kit #300002 recommended for high HP over 3000RPM Length: 2.69 Material: Steel Mounting Hardware Incl.: No O.D.: 9-1/4" (9.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 25 (17.3 Rwt)

Bore Dia. Min/Max: NA Degree Markings: No Engine Balance: Internal Finish: Black Zinc Keyway: Drill pin kit #300002 recommended for high HP over 3000RPM Length: 2.617 Material: Steel Mounting Hardware Incl.: No O.D.: 9-3/4" (9.750) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 24 (16.1 Rwt)