Dodge Ram 3500 Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Disconnect Design; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head~Dana 70 U; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

One Bearing; Chrysler 8.75 in; 42 Case Housing; 1.75in. Pinion Shaft Dia; No Return Dana 70 U

Case Split 4.10 And Down with Dana 70 Axle with Empty Case

Case Split 4.56 And Up with Dana 60 Axle with Empty Case

For Use w/Dana Spicer 60 Dana 60; Disconnect Design

For Use w/Dana Spicer 80 Dana 80

Case Split 3.42 And Up with Chrysler 9.25 Axle

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Disconnect Design; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Disconnect Design; Standard; Open; 4.10 And Down Carrier Break

Dana 70; Replacement; Standard; 4.56 And Up Carrier Break Dana 70 U; Replacement; Standard; 4.56 And Up Carrier Break

Dana 60; Disconnect Design

Dana 70; Standard; 4.10 And Down Carrier Break; ABS Compatible Dana 70 U; Standard; 4.10 And Down Carrier Break; ABS Compatible

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Disconnect Design; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Disconnect Design; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

For Chrysler 9.25", GM 9.25" IFS, 9.5"; Empty Case; Open; Use With Internal Kit GM9.5BI; 3.42 Ratio Carrier and Numerically Higher

Dana 70; Standard; 32 Spline; 4.10 And Down Carrier Break; Narrow For 70-2U Dana 70 U; Standard; 32 Spline; 4.10 And Down Carrier Break; Narrow For 70-2U

9.25 in.; Beam Axle Chrysler 9.25 in.; Beam Axle

Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible

9.5 in. 14 Bolt And 9.25 in.; Standard; Loaded Chrysler 9.25 in. Front; Standard Open Carrier Case; Loaded; Includes 33 Spline Spider Gears; 2.445 in. Deck Height~Chrysler 9.25 in.; Loaded

Dana 70; Standard; 4.10 And Down Carrier Break Dana 70 U; Standard; 4.10 And Down Carrier Break

11.5 in.; Standard Chrysler 11.5 in.; Standard

with Chrysler 8.25 Axle with Spider Gears Case Split 2.56 And Up Replaces OE Part Number(s) 52068451, 52068451AB with 27 Splines with Trac Lok Limited SLip Differential

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; Disconnect Design; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

11.5 in.; Standard; Loaded AAM 11.5 in. Rear; Standard Open Carrier Case; Loaded with 30 Spline Spider Gear Kit; 12 Bolt Case~Chrysler 11.5 in.; Standard; Loaded

with Spider Gears Case Split 3.73 And Down with Dana Model 44 Axle with Limited Slip Differential

with Dana Model 70 Axle Except without Spider Gears with Anti-Spin Differential Axle

with Loaded Open Case with 3.73 Gear Ratio and Up with 35 Splines with Dana 80 Axle

with Dana 70 Axle with Standard Differential Case Split 4.10 And Down Replaces OE Part Number(s) 04746621AB with 32 Splines

Dana 70; Power Lok; 4.10 And Down Carrier Break; ABS Compatible Dana 70 U; Power Lok; 4.10 And Down Carrier Break; ABS Compatible

Dana 70; 32 spline; 4.10 and down ratios

Dana 80; 35 Spline; 4.10 And Up; non-ABS Dana 80; 35 Spline; 4.10 And Up; non-ABS

with Standard Differential with 37 Spline Teeth with 4.10 or Higher Rear Axle Ratio with Dana 80 Axle

with Trac Lok Case Split 4.10 And Down with 30 Splines with Dana 60 Axle

with Dana 80 Axle with Spider Gear with 3.73 and Down Gear Ratio with 35 Spline Teeth with Trac-Lok Differential

with Loaded Limited Slip Case Case Split 4.10 And Up with 37 Splines with Dana 80 Axle

with Spider Gear with Trac-Lok Differential with 35 Spline Teeth with 4.10 or Higher Rear Axle Ratio with Dana 80 Axle

with Standard Differential with 3.73 and Down Gear Ratio with 35 Spline Teeth with Dana 80 Axle