with Hex Head Plus or Minus 2.00 Degree(s) Camber and/or Caster with Monobeam Front Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
with Hex Head Plus or Minus 1.00 Degree(s) Camber and/or Caster with Monobeam Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
with Hex Head Plus or Minus 0.25 Degree(s) Camber and/or Caster with Monobeam Front Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
with Hex Head Plus or Minus 0.75 Degree(s) Camber and/or Caster with Monobeam Front Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
with Hex Head with Monobeam Front Axle ; This 0.00 degree sleeve is used to determine the change needed
with Hex Head Plus or Minus 1.25 Degree(s) Camber and/or Caster with Monobeam Front Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
with Hex Head Plus or Minus 1.75 Degree(s) Camber and/or Caster with Monobeam Front Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
with Hex Head Plus or Minus 1.50 Degree(s) Camber and/or Caster with Monobeam Front Axle ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.
Cogged Head Plus or Minus 0.75 Degree to Plus or Minus 2.75 Degree Camber and / or Caster
0 Degree Replacement Bushing w/Teeth on Rim
OE Type Plus or Minus 2-3/4 Degree(s) Cogged Head
OE Type Plus or Minus 2-1/2 Degree(s) Cogged Head
Cogged Head Camber Adjustment from 0 to 3.2 Degrees
Original Design 1.75 Degrees
Adjustable Design Adjusts Caster/Camber -3/4 Degree to +2.75 Degrees
Plus or Minus 1-1/4 Degree(s) Cogged Head
Maximum Change of 1-1/2 Degrees on Dodge Axles with "Flats" Will Accommodate Stud Nut & Cotter Pin Adjustable Plus or Minus 3.2 Degree(s) Can Be Set At True Zero Degree
Adjustable -3/4 to 2-3/4 Degrees
Professional; Adjustable; Can Be Set At True Zero Degree; Plus or Minus 3/4 Degree to Plus or Minus 2-3/4 Degree Camber &/or Caster; Maximum Change of 1-1/2 Degrees on Dodge Axles with "Flats" Will Accommodate Stud Nut & Cotter Pin
Browse our selection of quality alignment caster / camber bushing parts designed specifically for your Dodge Ram 3500. We carry options across multiple trim levels, body styles, and engine configurations to ensure a perfect fit.
Base · Custom · SLT
Cab & Chassis · Extended Cab Pickup · Standard Cab Pickup
L6 5.9L · V10 8.0L · V8 5.9L
Automatic · Manual
