Dodge Ram 1500 Drive Axle Shaft Replacement

It is for the inner front axle.

Built for 4WD vehicles with the 5.7L engine.

Mileage: 147,000 miles

This axle shaft fits the inner position.

This axle shaft fits the inner position.

It fits 4x4 vehicles equipped with the Chrysler 9.25-inch ring gear.

Mileage: 108,000 miles

It fits 4x4 vehicles with the Chrysler 9.25-inch ring gear. This is the outer section of the shaft.

Mileage: 118,000 miles

It features an outer fitment.

Mileage: 67,000 miles

It is designed for the outer position.

Mileage: 90,000 miles

This front outer axle shaft needs a new U-joint. For vehicles with 4-wheel ABS.

Please compare the stud size to your original part before installing, as the size may vary.

Mileage: 55,000 miles

without ABS Ring without Oil Slinger

It is for vehicles without the electronic stability program.

It fits vehicles with the American 10.5 inch axle. It is not for Power Wagon models. This part fits Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, SLT, and Tradesman trim levels.

It fits vehicles with the American 10.5 inch axle. It is not for Power Wagon models.

It is for vehicles without the electronic stability program.

For vehicles with electronic stability program (sales code BNB). This system uses a speed sensor located on the outer end of the shaft.

It is for vehicles equipped with electronic stability program (sales code BNB). The electronic stability program uses a speed sensor located on the outer end of the shaft.

For 4-door vehicles with the 5.7L engine, 5-speed automatic transmission, and 4-wheel drive. This is an intermediate stub shaft.

Mileage: 133,800 miles

Right Hand Chrysler 8.0 in.; IFS; Standard Rotation

For Chrysler 8"; 19.27" Overall Length; 29 Spline

Chrysler 8.0 in. Ring Gear; IFS

with Dana 44 Axle

9.25 In. Ring Gear Does Include Bearing, Seal, or Hardware

with 33 Spline Teeth with AAM 9.25 Axle 19.58in Length Chrome Moly Steel

Left Hand Chrysler 8.0 in.; IFS; Standard Rotation

Replaces OE Part Number(s) 5015137AB with Dana 44 Front Axle

with OE Style Bushing Replaces OE Part Number(s) 04762162 with Dana 44 Disconnect Front Axle

Replaces OE Part Number(s) 4746729 with ABS Tone Ring with Dana Model 44 Axle

Front Right Outer; Chrysler 8.0 in. Ring Gear; 29 Spline; IFS

Dana 44; 15/30 Splines; 18.94 in. Length; w/Disconnect Dana 44; Disconnect Design; 15/30 Splines; 18.94 in. Length; w/Disconnect

Chrysler 9.25 in.; 34 1/8 in. Long; 1.705 in. Bearing; w/o ABS Chrysler 9.25 in.; Chrysler 34 1/8 in. Long; 1.705 in. Bearing; w/o ABS

Chrysler 9.25 in.; 34 1/8 in. Long; 1.705 in. Bearing; Incl. ABS Ring Chrysler 9.25 in.; Chrysler 34 1/8 in. Long; 1.705 in. Bearing; Incl. ABS Ring~Chrysler 9.25 in.; Rear Axle Shaft; 31 Spline; 34 1/8 in. Long; 1.705 in. Bearing Journal; Incl. ABS Ring

9.25 in. 12 Bolt; 31 Spline; 34 1/16 in. Length; 5 Lug Chrysler 9.25 in.; 31 Spline; 34 1/16 in. Length; 5 Lug

For Chrysler 8"; 19.27" Overall Length; 29 Spline

9.25 in. 12 Bolt; 34.44 in. Long; 1.620 Bearing Journal; 1.340 in. Shaft; Non-Drilled Blank 9.25 in. 12 Bolt; 34.44 in. Long; 1.620 Bearing Journal; 1.340 in. Shaft; Non-Drilled Blank

Dana 44; 15 Spline; 19.62 in. Length Dana 44; Disconnect Design; 15 Spline; 19.62 in. Length

Dana 44; 30 Spline; 4340 Chromoly Dana 44; Disconnect Design; 30 Spline; 4340 Chromoly

Dana 44; 30 Spline; 20.01 in. Length Dana 44; Disconnect Design; 30 Spline; 20.01 in. Length

with Dana 44 Axle

Dana 44; 30 Spline; 27.00 in. Length Dana 44; Disconnect Design; 30 Spline; 27.00 in. Length

Dana 44; Disconnect Design; 15 Spline; 26.39 in. Length; For Use w/ABS Dana 44; Disconnect Design; Disconnect Design; 15 Spline; 26.39 in. Length; For Use w/ABS

Dana 44; 30/33 Spline; 26.75 in. Length Dana 44; 30/33 Spline; 26.75 in. Length~Dana 44; Front Left Axle Assembly; 30 spline inner/ 33 Spline Outer; 26.75 in. Length

9.25 in. 12 Bolt; 27 in. Long; 33 Spline Inner Chrysler 9.25 in.; 27 in. Long; 33 Spline Inner~Chrysler 9.25 in.; Front Axle Assembly; Left Hand; 27 in. Long; 33 Spline Inner & Outer; 1485 U/Joint

9.25 in. 12 Bolt; 45.5 in. Long; 33 Spline Inner Chrysler 9.25 in.; 45.5 in. Long; 33 Spline Inner~Chrysler 9.25 in.; Front Axle Assembly; Right Hand; 45.5 in. Long; 33 Spline Inner & Outer; 1485 U/Joint

Replaces OE Part Number(s) 4746728 with ABS Tone Ring with Dana Model 44 Axle

Dana 44; 30 Spline; 26.39 in. Length Dana 44; Disconnect Design; 30 Spline; 26.39 in. Length

with Dana 44 Axle

30 Spline; Axle 27 in. Length; For Use w/ABS Dana 44; Disconnect Design; 30 Spline; Axle 27 in. Length; For Use w/ABS

with Chrysler 9.25 Axle

For vehicles with the American 11.5 inch axle and single rear wheels (SRW). This part fits Power Wagon models.

Fits vehicles with the American 11.5 inch axle and single rear wheels (SRW). Fits Power Wagon models.

Mileage: 205,900 miles

For Chrysler 9.25" (12 Bolt); 34.125" Overall Length; 5 x 5.5 Lug Pattern; 31 Spline

For Chrysler 9.25; 34.13" Overall Length; 31 Spline

with 33 Spline Teeth with ABS Ring with Dana 44 Axle

Mileage: 121,000 miles

Mileage: 99,000 miles

Mileage: 99,000 miles

For vehicles with rear wheel ABS (anti-lock braking system).

Mileage: 120,100 miles

It has a bad U-joint. For vehicles with rear wheel ABS.

Mileage: 120,100 miles

Mileage: 93,300 miles

9.25 in. Chrysler 9.25 in.; 9.25 in.~Chrysler 9.25 in.; Mega Cab; Outer Stub Axle; 7.40 in. Long; 33 Spline; 1541H Alloy

with 7.38in Length with AAM 9.25 Axle Chrome Moly Steel with 33 Spline Teeth

w/Sales Code DRW (10.50 Rear Axle)

without ABS Ring

with ABS Ring

w/tone Wheel-w/o studs;Supersedes part # 52114720AA