Dodge Nitro Disc Brake Caliper Replacement

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 130,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 165,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 165,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 158,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 158,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 130,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

It fits 4-door SUV models.

Condition: Excellent (A)
Mileage: 75,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

It was removed from a 4-door SUV.

Condition: Excellent (A)
Mileage: 75,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 116,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 130,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 78,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 75,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

This part features a single piston design.

Condition: Excellent (A)
Mileage: 75,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 116,000 miles

2008-2011 Dodge Nitro Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-01321

Condition: Excellent (A)
Mileage: 74,000 miles

$79.95 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 111,000 miles

2007-2011 Dodge Nitro Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 78,000 miles

2008-2012 Dodge Nitro Disc Brake Caliper Assembly - Front, Left (Driver) (Used OEM)

Partslink #: 536-01322

For 4-door SUV models.

Condition: Excellent (A)
Mileage: 165,000 miles

$55.95 View part →

2008-2012 Dodge Nitro Disc Brake Caliper Assembly - Front, Left (Driver) (Used OEM)

Partslink #: 536-01322

For 4-door SUV models.

Condition: Excellent (A)
Mileage: 169,000 miles

$55.95 View part →

2008-2012 Dodge Nitro Disc Brake Caliper Assembly - Front, Left (Driver) (Used OEM)

Partslink #: 536-01322

For 2-door SUV models.

Condition: Excellent (A)
Mileage: 184,000 miles

$55.95 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 16007401;16008701, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.594, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.67055

$62.12 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-B5045

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$57.00 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-17736B

Supplied w/ Mounting Bracket

$63.21 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (Centric)

Partslink #: 141.67518

$57.83 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-17735A

Supplied w/ Mounting Bracket 1-Piston Caliper

$63.49 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 16007401;16008701, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.594, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.67056

$62.12 View part →

2011 Dodge Nitro Disc Brake Caliper - Front Right (Cardone)

Partslink #: 18-B5484

Installation Hardware Included with Phenolic Piston Sell Out and Reorder 18-B5044 Supplied with Mounting Bracket

$65.58 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-17736A

Supplied w/ Mounting Bracket

$63.21 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P17736B

Supplied w/ Mounting Bracket

$69.36 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-17735B

Supplied w/ Mounting Bracket 1-Piston Caliper

$63.49 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 16007401;16008701, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.32, Mounting Hole Thread Diameter: 0.32, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.594, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P17735A

Supplied w/ Mounting Bracket 1-Piston Caliper

$69.63 View part →

2007-2010 Dodge Nitro Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-5045

Installation Hardware Included with Phenolic Piston Supplied without Mounting Bracket

$63.60 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (ACDelco)

Partslink #: 18FR2508

$87.17 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (Raybestos)

Partslink #: FRC11880C

without Heavy Duty Brakes

$64.03 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 16007401;16008701, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.594, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (Raybestos)

Partslink #: RC11879C

Replaced by RC11879C1 without Heavy Duty Brakes

$87.86 View part →

2011 Dodge Nitro Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-B5485

Installation Hardware Included with Phenolic Piston Sell Out and Reorder 18-B5045 Supplied with Mounting Bracket

$64.31 View part →

2007-2010 Dodge Nitro Disc Brake Caliper - Front Right (Skyward )

Partslink #: SK18B5045

w/ Phenolic Piston Caliper; Supplied with Mounting Bracket; Installation Hardware Included

$91.95 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P17736A

Supplied w/ Mounting Bracket

$69.36 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-3483654

$96.66 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P17735B

Supplied w/ Mounting Bracket 1-Piston Caliper

$69.63 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-42630

$98.60 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (Skyward )

Partslink #: SK18B5046

w/ Phenolic Piston Caliper; Supplied with Mounting Bracket; Installation Hardware Included

$75.67 View part →

w/ Phenolic Piston Caliper; Supplied with Mounting Bracket; Installation Hardware Included

$91.95 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-42040

$117.99 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-3335584

$96.66 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Right (Crown Automotive)

Partslink #: 68003697AA

$118.16 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Zinc Plated, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 2.59, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: New, Rust Resistant Coating: Yes

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-42631

$98.60 View part →

2011 Dodge Nitro Disc Brake Caliper - Front Right (Cardone)

Partslink #: 2C-5484

Installation Hardware Included with Phenolic Piston Obsolete Supplied with Mounting Bracket

$151.76 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L5046

$99.76 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Rear Left (Crown Automotive)

Partslink #: 68003778AA

$100.92 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L5045

$115.21 View part →

2007-2011 Dodge Nitro Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-42041

$117.99 View part →