Dodge Charger Steering Rack and Pinion Replacement

This power rack and pinion steering gear is for rear-wheel drive (4x2) vehicles with the 3.5L engine. Gear ratios may differ; please compare this part to your original before installing.

Condition: Excellent (A)
Mileage: 199,000 miles

It does not include the motor and does not include the tie rods. For vehicles with the 5.7L engine.

Condition: Excellent (A)
Mileage: 112,500 miles

For vehicles with the 3.6L engine.

Condition: Excellent (A)
Mileage: 64,000 miles

It fits vehicles with the 2.7L engine. Steering gear ratios may differ, so please compare this part to your original before installing.

Condition: Good (B)
Mileage: 112,000 miles

It is for vehicles with all-wheel drive (AWD). Please note that this part has a bent tie rod end.

Condition: Excellent (A)
Mileage: 113,000 miles

For vehicles with the 5.7L engine and 5-speed automatic transmission. For 4-door vehicles. Ratios differ, compare before interchanging.

Condition: Excellent (A)
Mileage: 189,500 miles

Built for vehicles with the Police Package (option code AHB), a 5.7L engine, and all-wheel drive (AWD). Please note that the right inner tie rod needs to be swapped.

Condition: Excellent (A)

For vehicles with the Police Package (option code AHB). Fits all-wheel drive vehicles with the 5.7L engine.

Condition: Good (B)
Mileage: 105,200 miles

It is a power rack and pinion steering gear for rear-wheel drive (RWD) vehicles with the 3.6L engine. This part is for vehicles without option code SDX. It includes the steering control module (EPS) and a rack and pinion mounted pump. The module may need to be reprogrammed to work with your vehicle.

Condition: Good (B)
Mileage: 105,000 miles

It is an electric power rack and pinion system that includes the pump motor. This part is for vehicles with option code SDC, which is a touring suspension.

Condition: Good (B)
Mileage: 191,000 miles

It is a power steering gear rack for vehicles with the 3.6L engine. It includes the electronic power steering (EPS) control module. The pump is mounted to the rack and pinion. The module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 89,000 miles

For vehicles with a rack and pinion mounted pump. Fits vehicles with performance suspension (option code SDD) or touring suspension (option code SDC).

Condition: Excellent (A)
Mileage: 99,000 miles

It includes the pump motor. For vehicles with the 3.6L engine and 8-speed automatic transmission. Fits vehicles with touring suspension (option code SDC), performance suspension (option code SDD), or option codes SDF and SDX.

Condition: Excellent (A)
Mileage: 93,000 miles

For rear-wheel drive vehicles with the 6.2L or 6.4L engine. This is a hydraulic power steering gear rack and pinion assembly for SRT Hellcat models.

Condition: Excellent (A)
Mileage: 50,000 miles

It is a power rack and pinion steering gear for rear-wheel drive (RWD) vehicles with the 5.7L engine and heavy duty suspension (option code SDB). This part includes the electronic power steering (EPS) control module and a rack-mounted pump. The module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 82,000 miles

It includes the pump motor.

Condition: Good (B)
Mileage: 200,600 miles

It includes the power steering motor. This part fits rear-wheel drive vehicles with the 6.2L engine.

Condition: Excellent (A)
Mileage: 68,000 miles