Dodge Challenger Drive Axle Shaft Replacement

Built for 4WD vehicles with the 3.6L engine. This part fits both sides of the vehicle.

Mileage: 72,000 miles

For 4WD or AWD vehicles with the 3.6L engine and 195mm axle. This part fits both sides.

Mileage: 72,000 miles

Mileage: 159,000 miles

Mileage: 38,700 miles

Mileage: 88,000 miles

Mileage: 112,500 miles

Mileage: 87,500 miles

It fits rear-wheel drive vehicles with the 3.6L engine and a 2.62 axle ratio. Built for vehicles where the 8th digit of the VIN is G.

Mileage: 156,000 miles

For vehicles with the 5.7L engine (engine ID EZH). Built for the US market; verify your vehicle's 8th VIN digit is T. This part fits vehicles without option code DSK.

Mileage: 83,000 miles

Built for vehicles with the 2.62 axle ratio. Verify your vehicle's 8th VIN digit is G.

Mileage: 156,000 miles

Built for all-wheel drive (AWD) vehicles with the 3.6L engine and 195mm axle. This part fits both sides of the vehicle.

Mileage: 111,000 miles

Built for all-wheel drive (AWD) vehicles with the 3.6L engine and 195mm axle. This part fits both sides of the vehicle.

Mileage: 111,000 miles

Mileage: 100,400 miles

It is for the outer position.

Mileage: 146,000 miles

This is the axle shaft assembly.

Mileage: 130,000 miles

It is for vehicles with the 3.6L engine. This is the outer part of the axle.

Mileage: 62,000 miles

Mileage: 88,000 miles

Mileage: 108,000 miles

This is a rear axle shaft assembly. For vehicles with a 195mm (7.6 inch) ring gear and a 3.07 gear ratio. For vehicles with the 3.6L engine (VIN G, 8th digit) and rear-wheel drive. This part fits both sides of the vehicle.

Mileage: 36,400 miles

It fits vehicles with the 3.6L engine (VIN G, 8th digit), rear-wheel drive (RWD), a 3.07 gear ratio, and a 195mm (7.6 inch) ring gear.

Mileage: 36,400 miles

This is a rear axle shaft assembly for rear-wheel drive vehicles with a 2.62 axle ratio.

Mileage: 109,200 miles

For vehicles with rear-wheel drive and a 2.62 axle ratio.

Mileage: 84,100 miles

Mileage: 72,000 miles

Mileage: 72,000 miles

It fits vehicles with a 195mm (7.6 inch) ring gear. Built for the US market; verify your vehicle's 8th VIN digit is G. This part includes both sides.

Mileage: 115,000 miles

Mileage: 64,000 miles

This part fits rear-wheel drive (RWD) vehicles.

Mileage: 149,000 miles

For vehicles with a 5.7L engine, automatic transmission, and rear-wheel drive. Fits 4-door models.

Mileage: 170,800 miles

It is for vehicles where the 8th digit of the VIN is J. This part is for vehicles without option code CXD.

Mileage: 102,000 miles

It is for vehicles without option code CXD. Built for the US market; verify your vehicle's 8th VIN digit is J.

Mileage: 102,000 miles

For rear-wheel drive vehicles with the 6.4L engine. Built for the US market; verify your vehicle's 8th VIN digit is J. Fits vehicles with the 8-speed automatic transmission (option code DSK, 8HP70).

Mileage: 88,000 miles

Built for the US market. Verify your vehicle's 8th VIN digit is J.

Mileage: 88,000 miles

Mileage: 122,700 miles

This rear axle shaft assembly fits vehicles with a 5-speed automatic transmission (W5A580). It is compatible with vehicles featuring a 220mm (8.6 inch) or 230mm (9.05 inch) ring gear. It fits vehicles with engine ID EZH and is for models without option code DSK. This part fits both sides of the vehicle.

Mileage: 85,500 miles

Mileage: 124,000 miles

8.75 in. 12 Bolt; 30 Spline; Cut To Fit; Accommodates Applications 28 in. - 32 in. Length; 5x4.5 Bolt Pattern Chrysler 8.75 in.; 489 Case Housing; 30 Spline; Cut To Fit; Accommodates Applications 28 in. - 32 in. Length; 5x4.5 Bolt Pattern~Chrysler 8.75 in.; 741 Case Housing; 30 Spline; Cut To Fit; Accommodates Applications 28 in. - 32 in. Length; 5x4.5 Bolt Pattern~Chrysler 8.75 in.; 742 Case Housing; 30 Spline; Cut To Fit; Accommodates Applications 28 in. - 32 in. Length; 5x4.5 Bolt Pattern

8.75 in. 12 Bolt; 30 Spline; 30 in. Length; 5 x 4.5 Bolt Pattern Chrysler 8.75 in.; 489 Case Housing; 30 Spline; 30 in. Length; 5 x 4.5 Bolt Pattern~Chrysler 8.75 in.; 741 Case Housing; 30 Spline; 30 in. Length; 5 x 4.5 Bolt Pattern~Chrysler 8.75 in.; 742 Case Housing; 30 Spline; 30 in. Length; 5 x 4.5 Bolt Pattern

This is the inner axle shaft (jackshaft). For vehicles with the 3.5L, 3.6L, or 5.7L engine.

Mileage: 162,000 miles

This part fits the SRT Hellcat.

Mileage: 87,000 miles

For rear-wheel drive vehicles with the 6.2L engine. This part is for vehicles without option code CXD.

Mileage: 30,000 miles

This part fits SRT Hellcat models.

Mileage: 50,000 miles

Intermediate Shaft