Dodge Challenger Disc Brake Caliper Replacement

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00982L

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 159,000 miles

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00982L

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 139,000 miles

2011-2023 Dodge Challenger Single Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: AP-0001047515

It fits rear-wheel drive (RWD) vehicles.

Condition: Excellent (A)
Mileage: 44,300 miles

$119.95 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00981R

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 159,000 miles

2009-2023 Dodge Challenger Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00981R

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 139,000 miles

2009-2023 Dodge Challenger Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00983R

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 37,000 miles

2009-2023 Dodge Challenger Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00983R

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 72,000 miles

2009-2023 Dodge Challenger Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00983R

Condition: Good (B)
Mileage: 113,800 miles

$69.95 View part →

2008-2023 Dodge Challenger Rear Disc Brake Caliper - Right (Passenger) (Used OEM)

Partslink #: 536-00146BR

Condition: Excellent (A)
Mileage: 50,100 miles

$113.95 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: AP-0001047473

Condition: Excellent (A)
Mileage: 44,300 miles

$119.95 View part →

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-00978L

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 139,000 miles

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-00977R

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 139,000 miles

1970-1974 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97-17622B

$48.54 View part →

1970-1974 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97-17622A

$48.54 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Centric)

Partslink #: 141.63070

Solid Rear Disc this is a dual bleeder caliper and can be used for either side for this application

$50.27 View part →

2009-2018 Dodge Challenger Disc Brake Caliper - Front Left (Raybestos)

Partslink #: FRC11710

Single Piston Caliper

$60.55 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 242c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.482, Mounting Hole Thread Diameter: 0.482, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2019 Dodge Challenger Disc Brake Caliper - Rear Left or Rear Right (Centric)

Partslink #: 141.63530

Vented Rear Disc this is a dual bleeder caliper and can be used for either side for this application

$55.01 View part →

2011-2021 Dodge Challenger Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 18-B4992

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$71.23 View part →

2009-2019 Dodge Challenger Disc Brake Caliper - Rear Left or Rear Right (Centric)

Partslink #: 141.63528

Solid Rear Disc this is a dual bleeder caliper and can be used for either side for this application

$56.22 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P17716B

Supplied w/ Mounting Bracket 1-Piston Caliper

$72.56 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.63045

Vented Rear Disc

$63.20 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 278c Right, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.75, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.63084

Performance Brakes

$73.41 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 274c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.474, Mounting Hole Thread Diameter: 0.474, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (Cardone)

Partslink #: 18-B5016

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket Supplied with Standard Boots

$66.01 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Screw Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Powder Coated, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: K242-049c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.474, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.126, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2021 Dodge Challenger Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 18-B4970

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$73.85 View part →

2009-2021 Dodge Challenger Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 18-P4971

Installation Hardware Included with Phenolic Piston Obsolete Supplied with Mounting Bracket

$71.59 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-17716B

Supplied w/ Mounting Bracket 1-Piston Caliper

$76.39 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 277c Left, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.75, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2021 Dodge Challenger Disc Brake Caliper - Rear or Rear Left or Rear Right (Centric)

Partslink #: 142.63528

Solid Rear Disc this is a dual bleeder caliper and can be used for either side for this application

$71.93 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 247c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.75, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.378, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-B5017

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket Supplied with Standard Boots

$78.96 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (Cardone)

Partslink #: 18-B4968

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$72.21 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-17678A

Supplied w/ Mounting Bracket w/ Vented Disc

$80.54 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P17716A

Supplied w/ Mounting Bracket 1-Piston Caliper

$72.56 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 310c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.482, Mounting Hole Thread Diameter: 0.482, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.63046

Vented Rear Disc

$80.75 View part →

2009-2010 Dodge Challenger Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 18-B4993A

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$72.94 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 274c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.474, Mounting Hole Thread Diameter: 0.474, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.126, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2023 Dodge Challenger Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99P17680A

Supplied w/ Mounting Bracket 1-Piston Caliper, w/ Solid Disc

$83.04 View part →

2009-2021 Dodge Challenger Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 18-B4971

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$73.19 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 242c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.482, Mounting Hole Thread Diameter: 0.482, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2023 Dodge Challenger Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-17680A

Supplied w/ Mounting Bracket w/ Solid Disc

$84.23 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 247c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.75, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.378, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2011-2021 Dodge Challenger Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 18-B4993

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$73.34 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-B4969

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket

$86.47 View part →

2012-2019 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Centric)

Partslink #: 141.63082

Touring Brakes this is a dual bleeder caliper and can be used for either side for this application

$76.21 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-17714B

Supplied w/ Mounting Bracket 2-Piston Caliper

$91.58 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-17716A

Supplied w/ Mounting Bracket 1-Piston Caliper

$76.39 View part →

2009-2010 Dodge Challenger Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L4992A

$93.95 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.63531

Red

$76.48 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: K247-185c, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.41, Mounting Hole Thread Diameter: 0.41, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P17714B

Supplied w/ Mounting Bracket 2-Piston Caliper

$97.68 View part →

2009-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Cardone)

Partslink #: 18-5016

Installation Hardware Included with Phenolic Piston Supplied without Mounting Bracket

$77.21 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 277c Left, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2011-2018 Dodge Challenger Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L4992

$109.18 View part →

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Cardone)

Partslink #: 18-B5017A

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket Supplied with Standard Boots

$78.93 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 278c Right, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Mounting Hole Thread size: M14 X 1.5, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.649, Piston Material: Phenolic, Piston Quantity: 2, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2009-2018 Dodge Challenger Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L4970

$114.42 View part →

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Cardone)

Partslink #: 18-B5016A

Installation Hardware Included with Phenolic Piston Supplied with Mounting Bracket Supplied with Standard Boots

$80.50 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97R17724B

4-Piston Caliper, Red Caliper Finish

$118.33 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-17678B

Supplied w/ Mounting Bracket w/ Vented Disc

$80.54 View part →

2009-2014 Dodge Challenger Disc Brake Caliper - Front Left (Crown Automotive)

Partslink #: 5137671AB

w/Dual Piston Calipers

$125.57 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99P17680B

Supplied w/ Mounting Bracket 1-Piston Caliper, w/ Solid Disc

$83.04 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-40065

Performance Brakes Dual Piston Front Calipers

$130.57 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99P17761B

Supplied w/ Mounting Bracket 1-Piston Caliper

$84.18 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97B17724B

4-Piston Caliper, Black Caliper Finish

$131.81 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99P17761A

Supplied w/ Mounting Bracket 1-Piston Caliper

$84.18 View part →

1970-1974 Dodge Challenger Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-40027

$138.46 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-17680B

Supplied w/ Mounting Bracket w/ Solid Disc

$84.23 View part →

2008-2023 Dodge Challenger Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 97R17723A

Red Caliper Finish

$139.75 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99-17761A

Supplied w/ Mounting Bracket 1-Piston Caliper

$85.50 View part →

2008-2023 Dodge Challenger Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 97B17723A

Black Caliper Finish

$139.76 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99-17761B

Supplied w/ Mounting Bracket 1-Piston Caliper

$85.50 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L4969

$147.06 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99P17762B

Supplied w/ Mounting Bracket 2-Piston Caliper

$86.13 View part →

2008-2019 Dodge Challenger Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L5084

$153.26 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99P17762A

Supplied w/ Mounting Bracket 2-Piston Caliper

$86.13 View part →

2009-2014 Dodge Challenger Disc Brake Caliper - Front Left (Crown Automotive)

Partslink #: 5142557AB

w/Single Piston Calipers

$154.00 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99-17762A

Supplied w/ Mounting Bracket 2-Piston Caliper

$89.03 View part →

2012-2017 Dodge Challenger Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L5017A

$159.20 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (BBB Industries)

Partslink #: 99-17762B

Supplied w/ Mounting Bracket 2-Piston Caliper

$89.03 View part →

2010 Dodge Challenger Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L5017

$159.23 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-17714A

Supplied w/ Mounting Bracket 2-Piston Caliper

$91.58 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L5086

$179.76 View part →

2009-2010 Dodge Challenger Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L4993A

$96.80 View part →

2013-2022 Dodge Challenger Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-3459795

w/ Painted Black Calipers

$180.24 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P17714A

Supplied w/ Mounting Bracket 2-Piston Caliper

$97.68 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-40041

$180.24 View part →

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Raybestos)

Partslink #: RC12665PC

Dual Piston Caliper w/o Brembo Calipers

$100.81 View part →

2009-2022 Dodge Challenger Disc Brake Caliper - Rear Left or Rear Right (Autopart International)

Partslink #: W0133-3497658

w/o Performance Brakes

$105.11 View part →

2009-2022 Dodge Challenger Disc Brake Caliper - Rear Left or Rear Right (Autopart International)

Partslink #: W0133-3395484

w/ Performance Brakes

$106.49 View part →

Dual Piston Front Calipers

$130.57 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97B17724A

4-Piston Caliper, Black Caliper Finish

$131.81 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97R17724A

4-Piston Caliper, Red Caliper Finish

$131.81 View part →

1970-1974 Dodge Challenger Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-40026

$138.46 View part →

2008-2023 Dodge Challenger Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 97B17723B

Black Caliper Finish

$139.75 View part →

2008-2023 Dodge Challenger Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 97R17723B

Red Caliper Finish

$139.75 View part →

2009-2014 Dodge Challenger Disc Brake Caliper - Front Right (Crown Automotive)

Partslink #: 5137670AB

w/Dual Piston Calipers

$144.38 View part →

2009-2021 Dodge Challenger Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L4968

$147.06 View part →

2008-2019 Dodge Challenger Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L5085

$153.26 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Anodized, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 2.38, Piston Material: Phenolic, Piston Quantity: 1, Product Condition: New, Rust Resistant Coating: Yes

2009-2014 Dodge Challenger Disc Brake Caliper - Front Right (Crown Automotive)

Partslink #: 5142556AA

w/Single Piston Calipers

$154.00 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (Cardone)

Partslink #: 2C-4968

Installation Hardware Included with Phenolic Piston Obsolete Supplied with Mounting Bracket

$158.01 View part →

2012-2017 Dodge Challenger Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L5016A

$159.20 View part →

2010 Dodge Challenger Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L5016

$159.23 View part →

2013-2022 Dodge Challenger Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-3353481

w/ Painted Black Calipers

$168.44 View part →

2009-2022 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Autopart International)

Partslink #: W0133-3486024

$168.71 View part →

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Powerstop)

Partslink #: L4969A

Except Performance Brakes

$171.21 View part →

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Powerstop)

Partslink #: L4968A

Except Performance Brakes

$171.21 View part →

2008-2020 Dodge Challenger Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L5087

$179.76 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Anodized, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Aluminum, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.551, Mounting Hole Thread Diameter: 0.551, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 1.65, Piston Material: Phenolic, Piston Quantity: 2, Product Condition: New, Rust Resistant Coating: Yes

2009-2011 Dodge Challenger Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-40040

$180.24 View part →

2012-2021 Dodge Challenger Disc Brake Caliper - Front Left or Front Right (Cardone)

Partslink #: 2C-5017A

Installation Hardware Included with Phenolic Piston Obsolete Supplied with Mounting Bracket

$183.11 View part →

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00984L

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 37,000 miles

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00984L

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 72,000 miles

2009-2023 Dodge Challenger Single-Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00984L

Condition: Good (B)
Mileage: 113,800 miles

$69.95 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-00979R

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 37,000 miles

2008-2020 Dodge Challenger Front Disc Brake Caliper - Left (Driver) (Used OEM)

Partslink #: 536-00127BL

Condition: Excellent (A)
Mileage: 97,500 miles

Sale price: $173.95

$153.95 View part →

2015-2023 Dodge Challenger Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: AP-0001047461

Fits rear-wheel drive (RWD) vehicles.

Condition: Excellent (A)
Mileage: 44,300 miles

$156.95 View part →

2009-2023 Dodge Challenger Dual-Piston Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-00980L

It was removed from a 4-door sedan.

Condition: Excellent (A)
Mileage: 37,000 miles

2009-2023 Dodge Challenger Disc Brake Caliper - Rear (Raybestos)

Partslink #: FRC11767

$71.23 View part →

2009-2023 Dodge Challenger Disc Brake Caliper - Rear (Raybestos)

Partslink #: FRC11759N

$115.79 View part →

2008-2023 Dodge Challenger Rear 4-Piston Brembo Disc Brake Caliper - Left (Driver) (Used OEM)

Partslink #: 536-00148BL

Condition: Excellent (A)
Mileage: 50,100 miles

$115.95 View part →

2009-2017 Dodge Challenger Disc Brake Caliper - Rear (Dynamic Friction)

Partslink #: 331-40631

Solid Rear Disc Fits Both Sides

$116.92 View part →

2009-2017 Dodge Challenger Disc Brake Caliper - Rear (Dynamic Friction)

Partslink #: 331-40633

Vented Rear Disc Fits Both Sides

$116.92 View part →

2012-2023 Dodge Challenger Disc Brake Caliper - Front (Dynamic Friction)

Partslink #: 331-40063

Except Performance Brakes Single Piston Front Calipers Caliper fits Both Sides.

$140.91 View part →

2009-2011 Dodge Challenger Disc Brake Caliper - Front (Dynamic Friction)

Partslink #: 331-40057

Caliper fits Both Sides.

$144.80 View part →

2015-2020 Dodge Challenger 4-Piston Brembo Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-00120CR

For rear-wheel drive vehicles with the 6.4L engine and performance brakes (option code BR4). This part features a black finish.

Condition: Excellent (A)
Mileage: 84,000 miles

$149.95 View part →

2015-2020 Dodge Challenger 4-Piston Brembo Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-00127CL

For rear-wheel drive vehicles with the 6.4L engine and performance brake package (option code BR4). This part features a black finish.

Condition: Excellent (A)
Mileage: 84,000 miles

$149.95 View part →

2009-2023 Dodge Challenger Disc Brake Caliper with Hose - Front, Left (Driver) (Used OEM)

Partslink #: AP-0001047509

This front disc brake caliper comes with the hose.

Condition: Excellent (A)
Mileage: 44,300 miles

$156.95 View part →

2008-2023 Dodge Challenger Brembo Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00146B

This is a Brembo brake caliper finished in orange.

Condition: Excellent (A)
Mileage: 79,000 miles

$425.95 View part →

2015-2023 Dodge Challenger Brembo Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00148CL

This is a 4-piston Brembo brake caliper with a black finish. It fits vehicles with option code BR4 or BR7.

Condition: Excellent (A)
Mileage: 73,000 miles

$159.95 View part →

2008-2023 Dodge Challenger Brembo Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-00146B

This part features a red finish.

Condition: Excellent (A)
Mileage: 68,000 miles

$1,199.95 View part →

2008-2023 Dodge Challenger Brembo Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00148B

This is a rear Brembo brake caliper. It is orange.

Condition: Excellent (A)
Mileage: 79,000 miles

$425.95 View part →

2008-2023 Dodge Challenger Brembo Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-00148B

This is a Brembo brake caliper for vehicles with the 6.2L engine and rear-wheel drive. The part features a red finish.

Condition: Excellent (A)
Mileage: 68,000 miles

$1,199.95 View part →

2008-2020 Dodge Challenger Brembo Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-00120BR

It fits rear-wheel drive vehicles with a 6.4L engine and automatic transmission.

Condition: Excellent (A)
Mileage: 77,000 miles

$159.95 View part →

2018-2023 Dodge Challenger 4-Piston Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-11119

The part itself is gunmetal gray.

Condition: Excellent (A)
Mileage: 60,000 miles

$299.95 View part →

2018-2023 Dodge Challenger 4-Piston Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-11118

This is a 4-piston rear brake caliper with a gunmetal gray finish.

Condition: Excellent (A)
Mileage: 60,000 miles

$299.95 View part →

2018-2023 Dodge Challenger 4-Piston Brembo Performance Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Partslink #: 536-11119L

This part features a red finish.

Condition: Excellent (A)
Mileage: 29,000 miles

$359.95 View part →

2018-2023 Dodge Challenger 4-Piston Performance Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Partslink #: 536-11118R

This caliper features a red finish.

Condition: Excellent (A)
Mileage: 29,000 miles

$359.95 View part →

2015-2023 Dodge Challenger 6-Piston Brembo Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-01580A

These are six-piston calipers finished in red. For rear-wheel drive vehicles with the 6.2L engine and option code BR7. Includes both sides for the front and rear.

Condition: Excellent (A)
Mileage: 87,000 miles

$2,045.95 View part →

2021-2023 Dodge Challenger 6-Piston Brembo Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-11117L

It features a red finish.

Condition: Excellent (A)
Mileage: 29,000 miles

$446.95 View part →

2015-2023 Dodge Challenger 6-Piston Brembo Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-01581B

This is a Brembo brake caliper.

Condition: Excellent (A)
Mileage: 79,000 miles

$549.95 View part →

2015-2023 Dodge Challenger 6-Piston Brembo Disc Brake Caliper - Front, Left (Driver) (Used OEM)

Partslink #: 536-01581A

This is a Brembo brake caliper for vehicles with the 6.2L engine and rear-wheel drive. The part features a red finish.

Condition: Excellent (A)
Mileage: 68,000 miles

$1,199.95 View part →

2015-2020 Dodge Challenger Brembo 6-Piston Disc Brake Caliper - Front, Right (Passenger) (Used OEM)

Partslink #: 536-01580B

This is a Brembo brake caliper finished in orange.

Condition: Excellent (A)
Mileage: 79,000 miles

$709.95 View part →