Chevrolet Tahoe Engine Water Pump Replacement

Serpentine Belt Driven Standard Duty

OE Replacement

OE Replacement

Serpentine Belt Driven Standard Duty

Direct replacement

Pump only

Standard replacement

Bolt On Pulley Serpentine Belt Driven

High performance

Serpentine Belt Driven

OE Replacement Single Thermostat

W/O Housing

Pump Only

Mileage: 107,900 miles

Mileage: 7,900 miles

High Performance

It also fits vehicles with the 4.3L or 6.2L engine, and vehicles with option code L83.

For vehicles with the 5.3L or 6.2L engine. This is a belt driven main coolant pump. It is the upper unit located under the throttle body.

It is for vehicles without the hybrid option.

Heavy Duty Heavy Duty option is for performance enhanced engines/severe duty applications Serpentine Belt Driven

Pump only

W/O Thermostat And Housing

Mileage: 95,900 miles

2.05" Diameter Thermostat Opening May Require New Thermostat

It also fits vehicles with the 5.3L, 6.0L, or 6.2L 8-cylinder engines. This part is for vehicles without the hybrid option.

This is a main coolant pump. It is belt driven and located in the upper position under the throttle body.

Mileage: 43,000 miles

Pump only

Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin

W/Thermostat And Housing

Incl. Thermostat

Pump Only

Serpentine Belt Driven Thermostat Bore Diameter 47mm

It fits vehicles with the 5.3L engine and rear-wheel drive. This part is belt driven and is located under the throttle body.

Mileage: 105,000 miles

Serpentine Belt Driven

Aluminum Revised Impeller Entry 0.100in. Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet Black

As-Cast 1.85in. Inlet Block-To-Hub 5.8125in. Aux. Outlets NPT/AN Fitting Ready 0.100in. Thicker Rear Cover Revised Impeller Entry Aluminum

Includes thermostat and thermostat housing

Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Polished

Includes Gaskets with Mechanical Thermostat ; New Water Pump

Mileage: 30,200 miles

Mechanical; Aluminum; High Perf.; Serpentine Belt Reverse Rotation; Block-To-Hub 6.9375 in.; 1.80 in. Inlet; 3/4 in Shaft OD; As-Cast

It is an electric pump that mounts lower on the vehicle, below the exhaust manifold.

Mileage: 42,400 miles

Includes thermostat and thermostat housing

GM Original Equipment

Mechanical; Aluminum; High Perf.; Serpentine Belt Reverse Rotation; Block-To-Hub 6.9375 in.; 1.80 in. Inlet; 3/4 in Shaft OD; Polished

Includes Gaskets with Mechanical Thermostat ; New Water Pump

Thermostat Not Included; New Water Pump Mounting Gaskets Included With 1.99 Inch; 50.6 Millimeter Thermostat

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Black

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Blue

W/Housing

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Blue

Electric Engine Water Pump; Aluminum; Red with Bowtie Logo; Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Red

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Black

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Red

Aluminum Revised Impeller Entry 0.100in.Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Polished

Satin Finish Short-Style Reverse Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block to Hub Height 1.84 in. Inlet w/Aftermarket Serpentine Belt Pulleys

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Chrome

Satin Finish Long-Style Reverse Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 6 15/16 in. Block To Hub Height 1.80 in. Inlet

Aluminum; Chrome with Bowtie Logo; Fits SB Chevy

2 Piece Standard Rotation 5.8125 in. Block To Hub Height -10AN Aux. Outlet Ports/-6AN Top Inlet Port 1.85 in. Inlet Dia.

Short-Style Reverse Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block to Hub Height 1.84 in. Inlet Size Polished Finish