Chevrolet Suburban Engine Water Pump Replacement

Standard Duty V-Belt Driven

High performance

Standard replacement

Aluminum Body

Standard replacement

Standard replacement

Pump only

Standard replacement

High Performance

High performance

W/5.8" Hub Height

W/O Housing

High performance

Pump Only

Mileage: 7,900 miles

It also fits vehicles with the 4.3L or 6.2L engine, and vehicles with option code L83.

For vehicles with the 5.3L or 6.2L engine. This is a belt driven main coolant pump. It is the upper unit located under the throttle body.

5.250" Hub Height

Mileage: 95,900 miles

This is a main coolant pump. It is belt driven and located in the upper position under the throttle body.

Mileage: 43,000 miles

Pump only

Mechanical Aluminum High Perf. Street Rods w/Aftermarket Serpentine Setup Reverse Rotation Block-To-Hub 5.625 in. 1.84 in. Inlet 3/4 in. Shaft OD As-Cast

Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin

Mechanical; Aluminum; High Perf.; Block-To-Hub 5.500 in.; 1.86 in. Inlet; 3/4 in. Shaft OD; As-Cast

It fits vehicles with the 5.3L engine and rear-wheel drive. This part is belt driven and is located under the throttle body.

Mileage: 105,000 miles

Mechanical Aluminum High Perf. Reverse Rotation Block-To-Hub 5.625 in. 1.84in. Inlet 3/4in Shaft OD Polished 1955-68 StreetRods w/Aftermarket Serpentine Setup

Aluminum Revised Impeller Entry 0.100in. Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet Black

Aluminum Revised Impeller Entry 0.100in. Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet As-Cast

Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Polished

Mileage: 30,200 miles

Cast Iron Heavy Duty V-Belt Driven

It is an electric pump that mounts lower on the vehicle, below the exhaust manifold.

Mileage: 42,400 miles

Includes thermostat and thermostat housing

Mechanical; Aluminum; High Perf.; Block-To-Hub 5.500 in.; 1.86 in. Inlet; 3/4 in. Shaft OD; Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Black

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Blue

W/Housing

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Black

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Blue

Electric Engine Water Pump; Aluminum; Red with Bowtie Logo; Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Red

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Red

Aluminum Revised Impeller Entry 0.100in.Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet Polished

Elect.; 35gpm at 12 Volts/42gpm at 16 Volts; 1.0in. NPT; 1.75in. Inlet; Depth 6.50in.; 2.5A Draw Dry; 8.0A Draw Wet; Nipple Atch; Incl. Pigtail/Gskts/Hdw.; Black

Satin Finish Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block To Hub Height 1.80 in. Inlet

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Chrome

Aluminum; 0.625 in. Pulley Pilot; Short Style

Aluminum; Chrome with Bowtie Logo; Fits SB Chevy

5.3

Aluminum; 35 gpm.; Black Finish; Incl. Wiring Harness; Mounting Gaskets/Hardware

Elect.; 35gpm at 12 Volts/42gpm at 16 Volts; 1.0in. NPT; 1.75in. Inlet; Depth 6.50in.; 2.5A Draw Dry; 8.0A Draw Wet; Nipple Atch; Incl. Pigtail/Gskts/Hdw.; Polished

-10 AN Aux. Fitting 90deg. To Block 3/4 in. Pilot Shaft 1.84 in. Inlet 5 13/16 in. Block To Hub Height Right Side Outlet Passage

3/8 in. NPT Aux. Fitting 45deg. To Block 3/4 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 1.85 in. Inlet 5 13/16 in. Block To Hub Height

-8 AN Aux. Fitting 90deg. To Block 3/4 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 1.85 in. Inlet 5 13/16 in. Block To Hub Height

Black FInish Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block To Hub Height 1.80 in. Inlet

2 Piece Standard Rotation 5.8125 in. Block To Hub Height -10AN Aux. Outlet Ports/-6AN Top Inlet Port 1.85 in. Inlet Dia.

Satin Finish Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 1/2 in. Block To Hub Height 1.95 in. Inlet

Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block To Hub Height 1.80 in. Inlet Size Polished Finish

Elect.; 50gpm at 12 Volts/60gpm at 16 Volts; 7.01in. Depth; 2.8A Draw Dry; 8.9A Draw Wet; 0.75 in. NPT Hose Adpt; Incl. Pigtail/Gskts/Hdw.; Polished Competition/Off Road/Race Use Only