Chevrolet Silverado 2500 HD Exhaust Muffler Replacement

with 2.5 (in) Muffler Inlet with Federal Emissions System Except Low Emission Vehicle (LEV) If welded assembly, replace all required parts with Small Diameter Muffler Use Reducer Bushing 41974 to connect with OE Converter Pipe

with 2.5 (in) Muffler Inlet with Federal Emissions System Except Low Emission Vehicle (LEV) If welded assembly, replace all required parts with Small Diameter Muffler Use Reducer Bushing 41974 to connect with OE Converter Pipe

If welded assembly, replace all required parts

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel

Round; 6 in.; 4 in. OD Aluminized; 22 in. Shell Length; 27 in. Overall Length

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

3.0 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Oval; 8.25 in. x 11.5 in.; 4 in. ID/OD; Shell Length 25 in.; Overall Length 30 in. Ultra Flo Welded System~New Body Style

Round; 6 in.; 4 in. ID; 16 in. Shell Length; 21 in. Overall Length Turbo Back System

3.5 in. Offset Inlet/3.5 Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in. Length; 409 Stainless Steel

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

If welded assembly, replace all required parts

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

3.5 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 18 in.; 24 in. Overall Length; Aluminized Steel

3.0 in. Dual Inlet/3.5 in. Offset Outlet; Case Dimensions 5 in. x 12 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

3.0 in. Dual Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 12 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

3.5 in. Offset In; 3.5 in. Offset Out; 409 Stainless Steel; Moderate Sound

DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

Extended Cab, Calif, LEV, Short Bed, Inc. Exhaust Pipe, Muffler, Converter & Tail Pipe

For vehicles with the 6.6L engine. This part is located behind the diesel particulate filter (DPF).

Mileage: 52,100 miles

9.62 in. Round; 4.02 in. Center Inlet/4 in. Center Outlet; 23.25 in. Length; 27.5 in. Overall Length; Satin Finish

Early