Chevrolet Malibu Engine Harmonic Balancer Replacement

It features a single belt design with a half-moon key.

Mileage: 105,000 miles

It features a 5-rib pulley and a slip-fit style design.

It is also compatible with the 2.3L engine (VIN D, 8th digit) and the 2.4L engine (VIN T, 8th digit). This part is for vehicles without the High Output option. The original factory part did not have a grounded pulley.

Mileage: 189,000 miles

Mileage: 99,000 miles

Mileage: 58,000 miles

Direct Replacement Exc. Special High Performance

It features a 7-rib pulley design. For US market vehicles, verify the 8th digit of your VIN is 5 (option code LAT). For Canadian market vehicles, verify the 8th digit of your VIN is Z (option code LAT). This part is not for the slip-fit style balancer.

Mileage: 194,000 miles

Direct Replacement

Direct Replacement

w/7 Rib Serpentine Belt

For vehicles with the 1.4L or 1.5L turbocharged gas engine. Built for the 1.5L engine with option code LE2. Verify your vehicle's 4th VIN digit is B and 8th VIN digit is M.

For vehicles with the 3.1L or 3.4L engine. Built for the US market; verify your vehicle's 8th VIN digit is M. Includes a 6-month warranty.

Mileage: 99,000 miles

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.09 in ATP Number: 102065 ATP Availability: Available to Order Pioneer Number: DA-1893 Pioneer Availability: Available to Order

w/Keyway w/Single Belt

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.09 in

Part Type: Solid Outer Diameter: 6.73 in ATP Number: 102075 ATP Availability: Available to Order Pioneer Number: DA-3071 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3071-HD

Part Type: Solid Outer Diameter: 6.73 in Supersession: Replaces DA-3071-HD

Part Type: Serpentine Outer Diameter: 6.44 in ATP Number: 102066 ATP Availability: Available to Order Pioneer Number: DA-1460 Pioneer Availability: Available to Order

Part Type: Solid Outer Diameter: 6.12 in

Part Type: Solid Outer Diameter: 6.12 in ATP Number: 102044 ATP Availability: Available to Order Pioneer Number: DA-3270 Pioneer Availability: Available to Order

Hollow Back Part Type: Solid Outer Diameter: 6.74 in ATP Number: 102069 ATP Availability: Available to Order Pioneer Number: DA-3051 Pioneer Availability: Available to Order

Groove Qty. 5 Part Type: Serpentine Outer Diameter: 6.42 in ATP Number: 102273 ATP Availability: Available to Order Pioneer Number: DA-2195 Pioneer Availability: Available to Order W/O eASSIST

8 In. Diameter Neutral Balance

Description: Hollow Back Part Type: Solid Outer Diameter: 6.74 in

Direct Replacement

8 In. Diameter, w/Counterweight

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.58 in ATP Number: 102207 ATP Availability: Available to Order Pioneer Number: DA-207 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3392

Part Type: Solid Outer Diameter: 7.99 in Supersession: Replaces DA-3502-HD

Part Type: Solid Outer Diameter: 7.99 in ATP Number: 102042 ATP Availability: Available to Order Pioneer Number: DA-3502 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3502-HD

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 6.58 in Supersession: Replaces DA-3392

8 In. Diameter, w/Counterweighted Ring

Part Type: Solid Outer Diameter: 6.99 in ATP Number: 102039 ATP Availability: Available to Order Pioneer Number: DA-396 Pioneer Availability: Available to Order

Part Type: Solid Outer Diameter: 6.99 in

Direct Replacement wo/Air Conditioning wo/Heavy Duty Cooling

Part Type: Solid Outer Diameter: 6.12 in ATP Number: 102041 ATP Availability: Available to Order Pioneer Number: DA-7009 Pioneer Availability: Available to Order

W/ Counterweight Part Type: Solid Outer Diameter: 8 in Inner Diameter: Coarse Threaded Bolt Holes ATP Number: 102049 ATP Availability: Available to Order Pioneer Number: DA-4541 Pioneer Availability: Available to Order

Description: Double V-Belt; Groove Qty. 2 Outer Diameter: 6.75 in

W/ Counterweight Part Type: Solid Outer Diameter: 8 in ATP Number: 102045 ATP Availability: Available to Order Pioneer Number: DA-400 Pioneer Availability: Available to Order

Description: W/ Counterweight Part Type: Solid Outer Diameter: 8 in Inner Diameter: Coarse Threaded Bolt Holes

Description: W/ Counterweight Part Type: Solid Outer Diameter: 8 in

Fits SB Chevy Engines;Internally Balanced; Diameter:6 3/4-in.; Finish:Natural; Material:Nodular Iron

Finish:Natural; Material:Nodular Iron

Fits SB Chevy Engines;Internally Balanced; Diameter:8-in.; Finish:Natural; Material:Nodular Iron

2 Groove Pulley w/Forged Steel Crankshaft

Externally Balanced; Diameter:8-in.; Finish:Natural; Material:Nodular Iron

Single Groove Pulley

Externally Balanced; Diameter:8-in.; Finish:Natural; Material:Nodular Iron

w/o High Performance Engine

Supersession: Renumbered from DA-427-HD

6.50 in. OD; External Balance; Black

8 In. Diameter Neutral Balance

8 In. Diameter, w/Counterweighted Ring

8 In. Diameter, w/Counterweight

w/o High Performance Engine

w/High Performance Engine

SFI Spec 18.1 Steel/Elastomer Neutral Balance 6.75 in. OD Black

8 In. Diameter Neutral Balance

SFI Spec 18.1 Steel/Elastomer Internal Zero Balance 6.10 in. OD Specialty SBC Lightweight Black

SFI Spec 18.1; Steel/Elastomer; External Balance; 6.75 in. OD; Black

SFI Spec 18.1 Steel/Elastomer Internal Balance 8.0 in. OD Black

SFI Spec 18.1; Steel/Elastomer; External Balance; 8.0 in. OD; Removable C/Weight; Black

Racing Version Sell Until Depleted

SFI Spec 18.1; Steel/Elastomer; Zero Internal Balance; 8.0 in. OD; Black

SFI Spec 18.1; Steel/Elastomer; External Balance; 8.00 in. OD; Removable C/Weight; Incl. Chev. 502; Black

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 40 BTDC to 10 ATDC. Additional timing/degree amrks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: No Finish Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 6-7/8" (6.875) Safety Rating: Not SFI Approved WT. in lbs.()=Rotating weight: 10.4 (6.9 Rwt) GENERATION I LATE MODEL SMALL BLOCK, INT. BAL.

SFI Spec 18.1; Steel/Silicone Gel [Running Design Change]; External Balance; 7.25 in. OD; Black

SFI Spec 18.1 Steel/Silicone Gel Internal Balance 7.25 in. OD Removable Hub Grade 12.9 Fasteners Black [Except 5.7L]

6.25 in. OD; Internal Balance; Black

8.00 in. OD; External Balance; Black

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 7.9 (5.3 Rwt) GENERATION I LATE MODEL SMALL BLOCK, INT. BAL.

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 40 degree BTDC to 10 degree ATDC Degree Markings: Yes Engine Balance: External (26 oz) Finish: No Finish Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 7-3/16" (7.188) Safety Rating: Not SFI Approved WT. in lbs.()=Rotating weight: 11.0 (8.2 Rwt) SMALL BLOCK, EXT. BAL.

Description: V-Belt; Groove Qty. 1 Outer Diameter: 6.685 in W/AC

Part Type: Solid Outer Diameter: 6.75 in

Description: W/ Counterweight Balancer Part Type: Solid Outer Diameter: 8 in

8.00 in. Netrual Balance TDC Mark Is Located 13 Degrees From Key-Way Street Performance

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: External (26 oz) Finish: Black Zinc Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/4" (7.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 13.7 (9.1 Rwt) SMALL BLOCK, EXT. BAL.

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 50 degree BTDC to 10 degree ATDC. Additional timing/degree marks at 90, 180 and Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/4" (7.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 12.2 (8.1 Rwt) GENERATION I LATE MODEL SMALL BLOCK, INT. BAL.

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: External (34.5 oz) Finish: Black Zinc Keyway: Single Length: 2.75 Material: Steel Mounting Hardware Incl.: No O.D.: 8" (8.000) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 17.3 (11.5 Rtw) BIG BLOCK, EXT. BAL.

Description: 6500 RPM Max Part Type: Solid Outer Diameter: 8 in

7.00 in. Neutral Balance Street Performance

Part Type: Solid Outer Diameter: 7.96 in Position Related Information: TDC Mark Is Located 13 Degrees From Key-Way

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: External (34.5 oz) Finish: Black Zinc Keyway: Dual Length: 2.75 Material: Steel Mounting Hardware Incl.: No O.D.: 8" (8.000) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 17.3 (11.5 Rwt) BIG BLOCK, EXT. BAL. Same as #800111 but for crankshafts w/ dual keyways: (1) 1/4" and (1) 1/4"

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: External (34.5 oz) Finish: Black Zinc Keyway: Dual Length: 2.75 Material: Steel Mounting Hardware Incl.: No O.D.: 8" (8.000) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 17.3 (11.5 Rwt) BIG BLOCK, EXT. BAL. Same as #800111 but for crankshafts w/ dual keyways: (1) 3/16" and (1) 1/4"

Part Type: Solid Outer Diameter: 6.74 in

Description: W/ Counterweight Part Type: Solid Outer Diameter: 8 in

Part Type: Solid Outer Diameter: 7.96 in

Description: Neutral Balance Part Type: Solid Outer Diameter: 6.99 in