Chevrolet Camaro Engine Harmonic Balancer Replacement

This part does not include the pulley.

Mileage: 58,000 miles

Direct Replacement Exc. Special High Performance

This part does not include the pulley. It fits heavy duty engines and models with 270 HP, 300 HP, or 350 HP.

It is designed for use with an externally balanced crankshaft.

It fits vehicles with an automatic transmission and without the supercharged option. Built for the US market; verify your vehicle's 8th VIN digit is K.

Mileage: 99,000 miles

Stamped 9033

Direct Replacement

Part Type: Solid Outer Diameter: 6.73 in ATP Number: 102075 ATP Availability: Available to Order Pioneer Number: DA-3071 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3071-HD

Part Type: Solid Outer Diameter: 6.73 in Supersession: Replaces DA-3071-HD

Part Type: Solid Outer Diameter: 6.12 in

Part Type: Solid Outer Diameter: 6.12 in ATP Number: 102044 ATP Availability: Available to Order Pioneer Number: DA-3270 Pioneer Availability: Available to Order

Hollow Back Part Type: Solid Outer Diameter: 6.74 in ATP Number: 102069 ATP Availability: Available to Order Pioneer Number: DA-3051 Pioneer Availability: Available to Order

8 In. Diameter Neutral Balance

Description: Hollow Back Part Type: Solid Outer Diameter: 6.74 in

Direct Replacement

For vehicles with the 3.6L engine.

Mileage: 99,000 miles

Part Type: Solid Outer Diameter: 7.99 in ATP Number: 102036 ATP Availability: Available to Order Pioneer Number: DA-3504 Pioneer Availability: Available to Order

Part Type: Solid Outer Diameter: 7.99 in

Part Type: Solid Outer Diameter: 7.99 in Supersession: Replaces DA-3502-HD

Part Type: Solid Outer Diameter: 7.99 in ATP Number: 102042 ATP Availability: Available to Order Pioneer Number: DA-3502 Pioneer Availability: Available to Order Pioneer Supersession: Replaces DA-3502-HD

Direct Replacement

It fits vehicles with the 3.6L engine (engine code LGX). Built for the US market. Verify your vehicle's 8th VIN digit is S.

Mileage: 99,000 miles

Direct Replacement wo/Air Conditioning wo/Heavy Duty Cooling

Description: Double V-Belt; Groove Qty. 2 Outer Diameter: 6.75 in

Groove Qty. 6, 4 Part Type: Double Serpentine Outer Diameter: 7.732 in ATP Number: 102171 ATP Availability: Available to Order Pioneer Number: DA-3510 Pioneer Availability: Available to Order

W/ Counterweight Part Type: Solid Outer Diameter: 8 in ATP Number: 102045 ATP Availability: Available to Order Pioneer Number: DA-400 Pioneer Availability: Available to Order

Groove Qty. 4, 6 Part Type: Double Serpentine Outer Diameter: 7.52 in ATP Number: 102058 ATP Availability: Available to Order Pioneer Number: DA-3507 Pioneer Availability: Available to Order

Description: W/ Counterweight Part Type: Solid Outer Diameter: 8 in

Description: Groove Qty. 6, 4 Part Type: Double Serpentine Outer Diameter: 7.732 in

Direct Replacement

Part Type: Solid Outer Diameter: 6.41 in ATP Number: 102063 ATP Availability: Available to Order Pioneer Number: DA-1890 Pioneer Availability: Available to Order

Description: Groove Qty. 4, 6 Part Type: Double Serpentine Outer Diameter: 7.52 in

Description: Groove Qty. 6; W/O Racing Balancer Part Type: Serpentine Outer Diameter: 7.52 in Without Racing Balancer

Diameter:6 3/4-in.; Finish:Natural; Material:Nodular Iron

Part Type: Solid Outer Diameter: 6.41 in

Groove Qty. 6 Part Type: Serpentine Outer Diameter: 7.07 in ATP Number: 102074 ATP Availability: Available to Order Pioneer Number: DA-2316 Pioneer Availability: Available to Order

Fits SB Chevy Engines;Internally Balanced; Diameter:6 3/4-in.; Finish:Natural; Material:Nodular Iron

Description: Groove Qty. 6 Part Type: Serpentine Outer Diameter: 7.07 in

Finish:Natural; Material:Nodular Iron

Fits SB Chevy Engines;Internally Balanced; Diameter:8-in.; Finish:Natural; Material:Nodular Iron

Single Groove Pulley

w/o High Performance Engine

Supersession: Renumbered from DA-427-HD

6.50 in. OD; External Balance; Black

8 In. Diameter Neutral Balance

7.50 in. OD; 0 Balance; Black

w/o High Performance Engine

w/High Performance Engine

SFI Spec 18.1 Steel/Elastomer Neutral Balance 6.75 in. OD Black

8 In. Diameter Neutral Balance

SFI Spec 18.1 Steel/Elastomer Internal Zero Balance 6.10 in. OD Specialty SBC Lightweight Black

SFI Spec 18.1; Steel/Silicone Gel; Underdrive; Black

SFI Spec 18.1 Steel/Elastomer Internal Balance 8.0 in. OD Black

Description: Hub Length: 3.417" Part Type: Solid w/Keyway Slot; Crank Flange Hubs Street Performance Balancer

SFI Spec 18.1; Steel/Elastomer; Zero Internal Balance; 8.0 in. OD; Black

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 40 BTDC to 10 ATDC. Additional timing/degree amrks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: No Finish Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 6-7/8" (6.875) Safety Rating: Not SFI Approved WT. in lbs.()=Rotating weight: 10.4 (6.9 Rwt) GENERATION I LATE MODEL SMALL BLOCK, INT. BAL.

SFI Spec 18.1 Steel/Silicone Gel Internal Balance 7.25 in. OD Removable Hub Grade 12.9 Fasteners Black [Except 5.7L]

SFI Spec 18.1; Steel/Elastomer; Internal Zero Balance; 7.50 in. OD; Black

6.25 in. OD; Internal Balance; Black

SFI Spec 18.1; Steel/Elastomer; Zero Internal Balance; 7.50 in. OD; Black

Bore Dia. Min/Max: 1.4818 / 1.4828 Degree Markings: No Engine Balance: Internal Finish: Black Zinc Keyway: None Length: 2.637 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 7.9 (5.3 Rwt)

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 7.9 (5.3 Rwt) GENERATION I LATE MODEL SMALL BLOCK, INT. BAL.

SFI Spec 18.1; Steel/Silicone Gel

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 40 degree BTDC to 10 degree ATDC Degree Markings: Yes Engine Balance: External (26 oz) Finish: No Finish Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 7-3/16" (7.188) Safety Rating: Not SFI Approved WT. in lbs.()=Rotating weight: 11.0 (8.2 Rwt) SMALL BLOCK, EXT. BAL.

Description: V-Belt; Groove Qty. 1 Outer Diameter: 6.685 in W/AC

; w/10% Underwire; Use w/crank flange hub 872015, 872016 or 872049 Race Balancer

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.685 Material: Steel Mounting Hardware Incl.: No O.D.: 6-1/4" (6.25) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 9.0 (6.0 Rwt) BIG BLOCK, INT. BAL.

Part Type: Solid Outer Diameter: 6.75 in

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.75 Material: Steel Mounting Hardware Incl.: No O.D.: 8" (8.000) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 15.5 (10.3 Rwt) BIG BLOCK, INT. BAL.

8.00 in. Netrual Balance TDC Mark Is Located 13 Degrees From Key-Way Street Performance

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: External (26 oz) Finish: Black Zinc Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/4" (7.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 13.7 (9.1 Rwt) SMALL BLOCK, EXT. BAL.

Bore Dia. Min/Max: 1.4818 / 1.4828 Degree Markings: No Engine Balance: Internal Finish: Black Zinc Keyway: None Length: 3.654 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/2" (7.500) Pulley Finish: Hard Coat Anodized Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 10.5 ( 7.7 Rwt)

Description: Groove Qty. 6, 4; 25% Underdrive Part Type: Double Serpentine Outer Diameter: 6.22 in

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single 3/16" Length: 2.685 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/4" (7.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 12.7 (8.5 Rwt) BIG BLOCK, INT. BAL.

Part Type: Solid Outer Diameter: 6.75 in

7.52 in. Serpentine Groove Qty. 6 Street Performance

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 50 degree BTDC to 10 degree ATDC. Additional timing/degree marks at 90, 180 and Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 2.335 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/4" (7.250) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 12.2 (8.1 Rwt) GENERATION I LATE MODEL SMALL BLOCK, INT. BAL.

Bore Dia. Min/Max: 1.245 / 1.246 Degree Marking Range: 40 degree BTDC to 10 degree ATDC. Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Single Length: 3.9 Material: Steel Mounting Hardware Incl.: No O.D.: 7-1/2" (7.500) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 13.1 (10.2 Rwt)

Description: 6500 RPM Max Part Type: Solid Outer Diameter: 8 in

Description: Groove Qty. 6, 4; 10% Underdrive Part Type: Double Serpentine Outer Diameter: 6.62 in Large Pulley; 6.33 in Small Pulley

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Dual Length: 2.75 Material: Steel Mounting Hardware Incl.: No O.D.: 8" (8.000) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 15.5 (10.3 Rwt) Same as #800101 but for crankshafts w/ dual keyways: (1) 1/4" and (1) 1/4"

Bore Dia. Min/Max: 1.599 / 1.600 Degree Marking Range: 50 BTDC to 10 ATDC. Additional timing/degree marks at 90, 180 and 270 Degree Markings: Yes Engine Balance: Internal Finish: Black Zinc Keyway: Dual Length: 2.75 Material: Steel Mounting Hardware Incl.: No O.D.: 8" (8.000) Safety Rating: SFI 18.1 WT. in lbs.()=Rotating weight: 15.5 (10.3 Rwt) Same as #800101 but for crankshafts w/ dual keyways: (1) 3/16" and (1) 1/4"

Part Type: Solid Outer Diameter: 7.96 in Position Related Information: TDC Mark Is Located 13 Degrees From Key-Way

Description: W/ Counterweight Part Type: Solid Outer Diameter: 8 in

7.52 in. Serpentine Groove Qty. 6 SFI RACE

7.52 in. Double Serpentine Groove Qty. 4, 6 SFI RACE

Hub; Inner Shell; Damper Assembly; Outer Shell; Crank Pulley Bolts; Hardware

Hub; Inner Shell; Damper Assembly; Outer Shell; Crank Pulley Bolts; Hardware

Hub; Inner Shell; Damper Assembly; Outer Shell; Crank Pulley Bolts; Hardware

Description: Groove Qty. 4, 8 Part Type: Double Serpentine Outer Diameter: 7.48 in