Chevrolet Blazer Drive Axle Shaft Replacement

Mileage: 42,100 miles

This rear axle shaft assembly is for vehicles without option code G99.

Mileage: 51,900 miles

Mileage: 37,000 miles

It is for vehicles without option code G99.

Mileage: 47,900 miles

This part fits the rear of the vehicle.

Mileage: 99,000 miles

For vehicles without an electronic locking differential.

Mileage: 70,900 miles

Mileage: 12,300 miles

For vehicles without an electronic locking differential.

Mileage: 65,900 miles

Mileage: 50,800 miles

This axle shaft fits vehicles without an electronic locking differential.

Mileage: 99,000 miles

Mileage: 103,000 miles

For vehicles without an electronic locking differential.

Mileage: 104,000 miles

Mileage: 96,000 miles

It is for vehicles without option code G99.

Mileage: 143,000 miles

For vehicles without option code G99.

Mileage: 103,000 miles

For vehicles with a 30-spline front axle shaft.

It is for the front of the vehicle and has 30 splines. One of the ears is dented.

It fits vehicles with a 2.0L engine, automatic transmission, and front-wheel drive (FWD).

Mileage: 50,000 miles

Mileage: 89,000 miles

Mileage: 120,000 miles

Mileage: 80,000 miles

This is a front axle shaft assembly. For vehicles with all-wheel drive (AWD).

Mileage: 58,900 miles

This is the front axle shaft assembly.

Mileage: 85,000 miles

This is an axle shaft assembly.

Mileage: 111,800 miles

Mileage: 104,000 miles

Mileage: 99,000 miles

Mileage: 50,800 miles

For vehicles with front-wheel drive.

Mileage: 71,100 miles

Mileage: 74,900 miles

This is the front axle shaft assembly. For front-wheel drive vehicles.

Mileage: 64,300 miles

Mileage: 103,000 miles

For all-wheel drive (AWD) vehicles.

Mileage: 103,000 miles

This is the front axle shaft assembly.

Mileage: 62,500 miles

This is the front axle shaft assembly.

Mileage: 62,500 miles

Built for front-wheel drive (FWD) vehicles.

Mileage: 124,000 miles

For vehicles with all-wheel drive (AWD).

For vehicles with all-wheel drive.

Mileage: 9,000 miles

It is a genuine OEM recycled part. Built for all-wheel drive (AWD) vehicles.

Mileage: 96,000 miles

This is a rear axle assembly.

Mileage: 58,900 miles

Mileage: 42,900 miles

For vehicles with an electronic locking differential (option code G99).

Mileage: 135,000 miles

Mileage: 221,400 miles

Mileage: 221,400 miles

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 36.13in Axle

with 36.13in Axle with 5-760X Universal Joint - Required Requires 5-760X U-Joint Steel Axle Shaft with 30 Spline Teeth with Dana 44 Axle

2.808 In. O.D. Large Bearing 30 Spline 8.5 In. Ring Gear 8.625 In. Ring Gear

with 5-760X Universal Joint - Required with Dana 44 & GM 8.5 Axles Requires 5-760X U-Joint with 28 Splines with 35.46in Shaft Length

2.535 In. O.D. Small Bearing 30 Spline 8.5 In. Ring Gear 8.625 In. Ring Gear Does Include Bearing, Seal, or Hardware

with 5-760X Universal Joint - Required with Dana 44 & GM 8.5 Axles Requires 5-760X U-Joint with 30 Splines with 35.46in Shaft Length

28 Spline 7.625 In. Ring Gear Does Include Bearing, Seal, or Hardware

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 36.13in Axle

7.625 In. Ring Gear Does Include Bearing, Seal, or Hardware wo/Limited Slip Differential

30 Spline 8.75 In. or 8.875 In. Ring Gear Does Include Bearing, Seal, or Hardware w/12 Bolt Cover

8.5 In. Ring Gear 8.625 In. Ring Gear Does Include Bearing, Seal, or Hardware Positraction w/RPO Code ZR2 (High Wider Package)

8.875 In. Ring Gear Does Include Bearing, Seal, or Hardware

8.5 in. 10 Bolt; 8.25 in.; 28 Spline; 19.51 in. Length 4340 Chromoly~GM 8.5 in.; 28 Spline; 19.51 in. Length

8.5 in. 10 Bolt; 8.25 in.; 28 Spline; 35.46 in. Length 4340 Chromoly~GM 8.5 in.; 28 Spline; 35.46 in. Length

8.5 in. 10 Bolt; 8.25 in.; 30 Spline; 35.46 in. Length 4340 Chromoly~GM 8.5 in.; 30 Spline; 35.46 in. Length

8.5 in. 10 Bolt; 8.25 in.; 30 Spline; 19.15 in. Length GM 8.5 in.; 30 Spline; 19.15 in. Length

Dana 44; 30 Spline; 18.5 in. Length Dana 44; Standard Rotation; 30 Spline; 18.5 in. Length

28 Spline 8.5 In. Ring Gear Does Include Bearing, Seal, or Hardware

7.625 In. Ring Gear w/Limited Slip Differential

8.5 in. 10 Bolt/8.25 in.; 28 Spline; 19.1 in. Length GM 8.5 in.; 28 Spline; 19.1 in. Length

Dana 44 Reverse; 30 Spline; 18.5 in. Length Dana 44; Standard Rotation; 30 Spline; 18.5 in. Length

8.875 in. 12 Bolt; 30 Spline; 31 7/16 in. Length; 6 Lug GM 12 Bolt Truck; 30 Spline; 31 7/16 in. Length; 6 Lug

7.625 In. Ring Gear Does Include Bearing, Seal, or Hardware

Dana 60; 35 Spline; 40 in. Long; Non-Drilled Blank Dana 60; 35 Spline; 40 in. Long; Full-floating; Non-Drilled Blank

8.5 in. 10 Bolt; 30 Spline; 31 1/2 in. Length GM 8.5 in.; 30 Spline; 31 1/2 in. Length

8.5 in. 10 Bolt; 28 Spline; 31 1/2 in. Length GM 8.5 in.; 28 Spline; 31 1/2 in. Length

30 Spline Does Include Bearing, Seal, or Hardware

Dana 44; 30 Spline; 36.13 in. Length; 5-760X U-Joint Size Dana 44; Standard Rotation; 30 Spline; 36.13 in. Length; 5-760X U-Joint Size

with Dana 60 Axle

Dana 44; 30 Spline; 36.13 in. Length Dana 44; Standard Rotation; 30 Spline; 36.13 in. Length

8.5 in. 10 Bolt; 30 Spline; 35.46 in. Length GM 8.5 in.; 30 Spline; 35.46 in. Length

8.5 in. 10 Bolt; 28 Spline; 35.5 in. Length GM 8.5 in.; 28 Spline; 35.5 in. Length

7.2 in. IFS; 26 Spline; 19.15 in. Length GM 8.5 in.; 26 Spline; 19.15 in. Length

with 5-760X Universal Joint - Required with Dana 44 & GM 8.5 Axles Requires 5-760X U-Joint with 19.15in Shaft Length with 30 Splines

with 5-760X Universal Joint - Required with Dana 44 & GM 8.5 Axles Requires 5-760X U-Joint with 19.15in Shaft Length with 28 Splines

Dana 44; 30 Spline; Axle 46.4 in. Dana 44; Standard Rotation; 30 Spline; Axle 46.4 in.

Dana 44; 30 Spline; Axle 28.4 in. Dana 44; Standard Rotation; 30 Spline; Axle 28.4 in.

For Dana 44, GM 8.5"; 9.94" Overall Length; 19 Spline

Mileage: 8,000 miles

Mileage: 107,000 miles

Mileage: 4,000 miles

with 19 Splines

For vehicles with an 8-1/2 inch ring gear, a 10-bolt cover, and 30 splines. Fits 4x4 models with 6-lug wheels. Fits Denali models. This part is for vehicles without an extended cab.

Mileage: 250,400 miles

For vehicles with a 12-bolt axle cover and 4-wheel drive.

Mileage: 96,200 miles

The shaft measures 31-11/32 inches.

Mileage: 96,200 miles

with 28.976in Length with 7.625in Diameter Ring Gear Replaces OE Part Number(s) 26013882 with 28 Spline Axle Shaft

For 4x4 vehicles with a 7-5/8 inch ring gear.

For 4x4 vehicles with a 7-5/8 inch ring gear.

For vehicles with a 7-5/8 inch ring gear and two-wheel drive. This part is for vehicles without rear ABS sensors.

It fits vehicles with the high wider performance package (option code ZR2).

Mileage: 212,400 miles

with 28 Splines with 31.50in Shaft Length with GM 8.5 Axle

with GM 8.5 & 8.6 Axles with 30 Splines with 31.50in Shaft Length

For vehicles with the 3.6L engine.

Mileage: 1,000 miles

It features an ABS ring and is designed for vehicles with 6-lug wheels.

Mileage: 70,000 miles

For GM 7.625" (10 Bolt); 26.625" Overall Length; 5 x 4.75 Lug Pattern; 28 Spline

For GM 8.5" (10 Bolt); 33" Overall Length; 6 x 5.5 Lug Pattern; 30 Spline

For GM 8.875" (12 Bolt); 31.313" Overall Length; 5 x 5 Lug Pattern; 30 Spline

Replaces OE Part Number(s) 26116760 with 28 Splines with GM 7.5 & 7.625 Axles

For GM 8.5" (10 Bolt); 31.3125" Overall Length; 6 x 5.5 Lug Pattern; 30 Spline

For GM 8.5" (10 Bolt); 31.31" Overall Length; 6 x 5.5 Lug Pattern; 28 Spline

For GM 8.875" (12 Bolt); 31.281" Overall Length; 6 x 5.5 Lug Pattern; 30 Spline

For GM 8.875" (12 Bolt); 30.75" Overall Length; 5 x 5 Lug Pattern; 30 Spline

with 2 Snap Ring Grooves at Shaft End with 9.72in Shaft Length with Dana 44 Front Axle

For GM 7.625" (10 Bolt); 28.8125" Overall Length; 5 x 4.75 Lug Pattern; 28 Spline

For GM 8.875" (12 Bolt); 30.75" Overall Length; 6 x 5.5 Lug Pattern; 30 Spline

Requires 5-760X with 9.94in Shaft Length with Dana 44 & GM 8.5 Axles

Ring Gear 7.625"