Buick Skylark Electric Fuel Pump Replacement

An engine oil pressure switch may be required A fuel pump block-off plate may be required with California Emissions System with Air Conditioning

When Replacing The Pump Only Both Strainers Are Required Includes Tank Seal Strainer required to validate the warranty: F120S, F131S

Includes Tank Seal Strainer required to validate the warranty: F102S

Includes Tank Seal Strainer required to validate the warranty: F104S

12 volt 2.5 to 4.5 pounds of pressure Requires 3" x 5" Mounting Area

Includes Tank Seal Strainer required to validate the warranty: F104S

Includes Tank Seal Strainer required to validate the warranty: F104S

Includes Tank Seal Strainer required to validate the warranty: F104S

An engine oil pressure switch may be required A fuel pump block-off plate may be required without Air Conditioning

1.45" diameter pump

w/ 1.45 Inch Diameter Pump Tag Code CPK, CPV

Universal 12 Volt 5 to 9 pounds of pressure. Requires 3" x 5" Mounting Area

w/ CAE or CEH on Wiring Harness Tag

1 locking tab on internal pump connector. 38mm body with brass return jet on pump body and black jet hose.

(Universal Inline) (12 Volt 4 to 6 PSI) Requires 3" x 6" Mounting Area

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34

An engine oil pressure switch may be required A fuel pump block-off plate may be required with California Emissions System with Air Conditioning

An engine oil pressure switch may be required A fuel pump block-off plate may be required without Air Conditioning

Electric Replacement for Mechanical When converting from OE mechanical pump to inline electric system an additional inline fuel pressure regulator may be required to maintain proper line pressure

Professional; CALIF, A/C