1995 Mazda Millenia Wiper Motor: Decoding the Critical Production Date
This guide covers diagnosing, replacing, and buying the correct used wiper motor for your early 1995 Millenia, focusing on the crucial pre-April 1994 production date.
- This wiper motor (TA01-67-340) ONLY fits 1995 Millenias with a production date on or before April 1, 1994.
- Always verify your vehicle's production date on the driver's door jamb sticker before purchasing.
- Common failure symptoms include slow operation, single-speed operation, or wipers that won't park correctly.
- Before replacing the motor, always check the wiper fuse first as it's a simple and common point of failure.
Compatibility Warning: For Early 1995 Models ONLY
Critical: This windshield wiper motor, OEM part number TA01-67-340, is only for early 1995 Mazda Millenia models. It specifically fits vehicles with a production date on or before April 1st, 1994. A different part was used for vehicles built after this date. Before ordering, you must verify your vehicle's production date.
To find your car's production date, open the driver's side door and look for a sticker on the door jamb or the edge of the door. The date will be printed on this label, usually in a MM/YY format (e.g., 03/94).
Symptoms of a Failing Wiper Motor
A failing wiper motor can present several distinct symptoms. If you notice any of the following, it's time to investigate the motor.
🎬 See a breakdown of common failing wiper motor symptoms.- Wipers Move Slowly: The wipers struggle to move across the glass, even on the highest speed setting. This can indicate a weak or dying motor.
- Only One Speed Works: If you can only get the wipers to work on one speed (typically high), the motor's internal resistor or windings for other speeds have likely failed.
- Wipers Won't Park Correctly: When you turn the wipers off, they should return to their resting position at the base of the windshield. If they stop in the middle of the glass or in the up position, the internal 'park' switch in the motor assembly is likely broken.
- No Movement, But Motor Hums: If you can hear a humming or buzzing sound from the cowl area when you activate the wipers, but the arms don't move, the motor is receiving power but its internal gears may be stripped or the linkage may have disconnected.
- Wipers Don't Work at All: If there's no movement and no sound, the issue could be a blown fuse, a bad switch, faulty wiring, or a completely dead motor.
Diagnosing the Problem
Before condemning the motor, perform these simple checks:
🎬 Watch this guide on how to diagnose your wiper motor.- Check the Fuse: This is the first and easiest step. A blown fuse is a common cause of non-functioning wipers.
- Listen for the Motor: Turn the wipers on and listen carefully at the base of the windshield on the driver's side. A humming sound indicates the motor is getting power. No sound points towards an electrical supply issue (fuse, relay, or switch).
- Inspect the Wiper Linkage: Sometimes the nut holding the wiper linkage to the motor's output shaft can come loose, or the linkage itself can break. A visual inspection may reveal a disconnected arm.
Buying a Used Windshield Wiper Motor
For a vehicle like the 1995 Millenia, a quality used OEM wiper motor is an excellent, cost-effective choice. Here’s what to look for:
- Confirm the Production Date: This is the most important step. Double-check that the donor vehicle was produced on or before April 1, 1994, to ensure compatibility.
- Match the Part Number: Verify the part is a TA01-67-340. This removes any guesswork.
- Inspect the Connector: Check the electrical connector pins for any signs of corrosion, melting, or damage. A clean connector is a good sign.
- Check the Output Shaft: Look at the splined shaft where the wiper linkage attaches. Ensure the splines are clean and not stripped.
- Why Used OEM?: Original Mazda parts from this era were built to a high standard. A recycled OEM motor is often more durable and provides a better fit than a new, cheaply made aftermarket alternative.
Replacement Overview
Pro Tip: You may need a specialized wiper arm puller tool to safely remove the wiper arms without damaging them. 🎬 Check out the best tool for removing stubborn wiper arms. These are often available through auto parts store loaner tool programs.
Replacing the wiper motor is a straightforward job for a DIYer with basic tools. The general process involves:
- Disconnecting the negative battery terminal.
- Removing the plastic caps and nuts holding the wiper arms on, then removing the arms.
- Removing the plastic cowl cover at the base of the windshield to access the motor and linkage.
- Unplugging the motor's electrical connector.
- Unbolting the wiper linkage assembly and removing it from the vehicle.
- Unbolting the old motor from the linkage and installing the new one.
- Reassembling everything in the reverse order. Torque for the motor mounting bolts is 61–88 inch-pounds.
Cost of Replacement
| Part Type | Estimated Cost |
|---|---|
| New OEM | $400 - $500+ (if available) |
| New Aftermarket | $50 - $150 |
| Used OEM | $35 - $75 |
| Shop Labor | $100 - $250 |
Known Issues, Recalls, and TSBs
As of early 2026, there are no specific recalls or Technical Service Bulletins (TSBs) from Mazda or the National Highway Traffic Safety Administration (NHTSA) related to the windshield wiper motor for the 1995 Mazda Millenia. Any failures are typically due to age and normal wear and tear on the component.
Frequently Asked Questions (FAQ)
How do I find my Millenia's production date?
Look for the manufacturer's sticker on the driver's side door jamb. The production date, usually in a MM/YY format, will be printed on it. This is essential to ensure you buy the correct wiper motor.
Can I use a wiper motor from a later 1995 or 1996 Millenia?
No. Mazda changed the wiper motor design for vehicles produced after April 1, 1994. A motor from a later model will not be a direct fit for your early 1995 Millenia.
My wipers are slow. Is it definitely the motor?
Slow operation is a classic symptom of a failing motor, but it can also be caused by binding or corroded wiper linkage pivots. With the linkage disconnected from the motor, try moving the wipers by hand. If they are very stiff, the linkage may need to be lubricated or replaced. If they move freely, the motor is the likely culprit.
Do I need to do any programming after installing a new motor?
No. The 1995 Mazda Millenia wiper motor is a simple electrical component and does not require any computer programming or calibration after installation.
Helpful Videos
Technical Specifications
OEM Part Numbers: TA01-67-340
Fits vehicles with a production date on or before April 1, 1994.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Mazda Millenia: