2021-2026 Nissan Kicks Wheels: Decoding the 2025 Redesign and Bolt Pattern Change
This guide explains the crucial differences between 2021-2024 and 2025+ Kicks wheels, including the critical change from a 4-lug to a 5-lug bolt pattern.
- The 2025 Kicks redesign changed the bolt pattern from 4-lugs (2021-2024) to 5-lugs (2025-2026), making wheels incompatible between generations.
- Always verify your bolt pattern by counting the lug nuts before buying a replacement wheel.
- When buying used, inspect carefully for cracks, bends, and signs of previous weld repairs, as these can compromise safety.
- A voluntary service campaign exists for some 2023 Kicks front wheel hubs (NTB24-001) and a recall for incorrect wheel size information on the door label of some 2025 Kicks (25V188000).
Critical Compatibility Warning: The 2025 Redesign Changed Everything
Warning: The Nissan Kicks was completely redesigned for the 2025 model year. This redesign included a fundamental change to the wheel hub and suspension. As a result, wheels for 2021-2024 models are NOT interchangeable with wheels for 2025-2026 models. The primary difference is the bolt pattern.
- 2021-2024 Kicks: Use a 4-lug bolt pattern (4x100mm).
- 2025-2026 Kicks: Use a 5-lug bolt pattern (5x114.3mm).
Before purchasing a replacement wheel, you MUST count the number of lug nut holes on your existing wheels. This is the fastest way to ensure you are buying for the correct generation.
Wheels for 2021-2024 Nissan Kicks (First Generation, Facelift)
Models from 2021 to 2024 are part of the first-generation Kicks that received a facelift in 2021. All wheels for this generation use a 4-lug bolt pattern. The standard lug nut torque specification for these models is 83 ft-lbs (113 Nm).
16-inch Steel Wheel (Kicks S)
The base S trim came standard with 16-inch steel wheels with a plastic wheel cover.
17-inch Alloy Wheels (Kicks SV & SR)
The SV and SR trims were equipped with 17-inch alloy wheels. There were two primary styles available during this period.
- 15-Spoke Charcoal Machined Alloy: This was a common factory wheel on SV and SR trims. It is a 17x6.5 inch wheel. The primary OEM part number is 40300-5R03E.
- 5-Double-Spoke Black Alloy: This was often sold as an accessory wheel, providing a sportier look. It is also a 17x6.5 inch wheel. Known part numbers include D0300-5R09J (which replaces 40300-5R09J) and T99W1-5R09J for the kit.
Wheels for 2025-2026 Nissan Kicks (Second Generation)
The all-new Kicks introduced in 2025 is larger, features a new engine, and offers all-wheel drive for the first time. This new platform uses a more robust 5-lug wheel configuration across all trims. The recommended lug nut torque remains 83 ft-lbs.
16-inch Steel Wheel (Kicks S)
The base 2025-2026 Kicks S trim comes with 16x6.5 inch black steel wheels. The OEM part number for this wheel is 40300-7LA0C.
17-inch and 19-inch Alloy Wheels (Kicks SV & SR)
The higher SV and SR trims feature new, more complex alloy wheel designs in 17-inch and, for the first time, 19-inch sizes. Part numbers for these new wheels are still emerging, but known numbers from the new generation include 40300-7LC1J, 40300-7LC3A, and T99W1-7LC1J.
Pro Tip: There was a recall for some 2025 Kicks SR models with optional 19-inch wheels because the certification label on the door jamb listed the incorrect wheel size. Always verify the size printed on the tire's sidewall (e.g., R17 or R19) matches the wheel you are purchasing.
Technical Specifications
| Specification | 2021-2024 Kicks | 2025-2026 Kicks |
|---|---|---|
| Bolt Pattern (PCD) | 4 x 100 mm | 5 x 114.3 mm |
| Center Bore (Hub Bore) | 60.1 mm | 66.1 mm |
| Wheel Offset | ~ +45 mm | ~ +32 mm to +40 mm |
| Lug Nut Torque | 83 ft-lbs (113 Nm) | |
| Lug Nut Thread Size | M12 x 1.25 | |
What Happens if the Offset is Wrong?
Wheel offset is the distance from the wheel's mounting hub to its centerline. Using a wheel with the wrong offset can cause serious problems. A significantly lower offset (wheel pushed further out) can cause the tire to rub on the fender. A significantly higher offset (wheel tucked further in) can cause the tire or wheel to interfere with suspension components like the strut or brake caliper. Both scenarios can lead to premature tire wear, poor handling, and added stress on wheel bearings, leading to early failure.
Symptoms of a Failing or Damaged Wheel
- Vibration: A bent wheel will cause a noticeable vibration or wobble that gets worse with speed. This is often felt in the steering wheel.
- Slow Air Loss: A hairline crack in the wheel, often on the inner barrel, can cause a slow, persistent tire leak that is difficult to find.
- Visible Damage: Obvious signs include curb rash (scraping on the outer lip), peeling clear coat, corrosion, and large dents or bends from pothole impacts.
- Thumping or Clicking Noises: While often related to axles or bearings, a severely damaged wheel or improper lug nut torque can cause noises while driving.
Known Issues, Recalls, and Service Bulletins
- Recall 25V188000 (2025 Kicks): Certain 2025 models have an incorrect certification label in the door jamb. For SR trims with optional 19-inch wheels, the label may state the wrong wheel size. This can lead to improper tire inflation.
- Voluntary Service Campaign NTB24-001 (2023 Kicks): Nissan issued a service campaign to replace both front wheel hubs on certain 2023 Kicks vehicles. A faulty hub can cause symptoms similar to a bad wheel or bearing.
- TSB NTB12-055J: This bulletin addresses a clicking noise from the front or rear axle during acceleration, which owners might mistake for a wheel issue.
- TSB NTB08-097L: This bulletin provides diagnostic procedures for a vehicle pulling to one side or having an off-center steering wheel, which can be related to alignment but is important to rule out when diagnosing wheel-related symptoms.
Buying a Used Wheel: What to Look For
Buying a used OEM wheel is a great way to save money, but a thorough inspection is crucial for safety.
- Verify Compatibility: First and foremost, count the lug holes. 4 lugs for 2021-2024, 5 lugs for 2025-2026. They are not interchangeable.
- Check for Cracks: Inspect the entire wheel, front and back. Pay close attention to the area around the lug holes and where the spokes meet the barrel. Hairline cracks can be hard to see.
- Look for Bends: Lay the wheel on a flat surface and check if the inner and outer lips are level. Spin the wheel and watch the edges for any wobble or runout. Even a slight bend can cause a vibration that is impossible to balance out.
- Inspect for Repairs: Look for signs of welding on the back of the wheel. A weld indicates a previous crack repair. While some repairs can be done safely, they create a potential weak point. Uneven paint or filler can also hide damage.
- Examine the Finish: Check for severe corrosion, especially around the center bore and lug seats, as this can prevent the wheel from mounting flat against the hub. Minor curb rash is usually cosmetic, but deep gouges can indicate a harder impact.
- Check the Lug Seats: Ensure the tapered seats where the lug nuts make contact are clean and not deformed or elongated, which could indicate the wheel was driven while loose.
Cost Comparison for a Single 17-inch Kicks Wheel
| Part Type | Estimated Cost | Notes |
|---|---|---|
| New OEM | $450 - $900 | Purchased from a Nissan dealership. Prices vary significantly by part number and year. |
| New Aftermarket | $150 - $275 | Quality can vary. Ensure it is certified (JWL/VIA) and matches the OEM offset and size exactly. |
| Used OEM | $125 - $300 | From a salvage yard or online seller. Price depends on condition. Requires careful inspection. |
| Remanufactured OEM | $140 - $350 | A used OEM wheel that has been professionally inspected, straightened, and refinished. A good balance of cost and quality. |
| Shop Labor (Mount & Balance) | $25 - $50 per tire | Cost to move your tire and TPMS sensor to the new wheel and balance the assembly. |
Frequently Asked Questions (FAQ)
Will a wheel from a 2023 Kicks fit on my 2025 Kicks?
No, it will not fit. The 2023 model uses a 4-lug bolt pattern (4x100mm), while the redesigned 2025 model uses a 5-lug bolt pattern (5x114.3mm). The wheels are physically incompatible.
How do I find my wheel size and offset?
The wheel diameter and width are usually stamped on the back of one of the spokes (e.g., "17x6.5J"). The offset is also typically stamped on the back and may be preceded by "ET" (e.g., "ET45"). The tire size on the sidewall (e.g., 205/55R17) will tell you the wheel diameter (17 inches).
Is it safe to buy a wheel with curb rash?
Minor cosmetic curb rash (scraping along the outer edge) is generally safe and does not affect the structural integrity of the wheel. However, deep gouges or any damage that has caused the wheel to bend or crack is a major safety concern, and the wheel should not be used.
Do I need to buy a new TPMS sensor with a replacement wheel?
No, in most cases a tire shop can carefully remove the Tire Pressure Monitoring System (TPMS) sensor from your old wheel and install it in the replacement wheel. You only need a new sensor if the old one is damaged or its battery has died.
What is the correct way to tighten my lug nuts?
Always tighten the lug nuts in a star or crisscross pattern to ensure the wheel seats evenly against the hub. Use a calibrated torque wrench to tighten them to the factory specification of 83 ft-lbs. Do not use an impact gun to perform the final tightening, as this can overtighten and damage the studs or wheel. It is also recommended to re-check the torque after driving 50-100 miles.
Technical Specifications
OEM Part Numbers: 40300-5R03E D0300-5R09J 40300-5R09J T99W1-5R09J 40300-7LC1J 40300-7LC3A 40300-7LA0C T99W1-7LC1J
2021-2024 Models: Bolt Pattern 4x100mm, Center Bore 60.1mm, Offset ~45mm. 2025-2026 Models: Bolt Pattern 5x114.3mm, Center Bore 66.1mm, Offset ~32-40mm. All Models: Lug Nut Torque 83 ft-lbs.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Nissan Kicks:
- NISSAN KICKS:
- 🛍️ Shop This Part
- Critical Compatibility Warning: The 2025 Redesign Changed Everything
- Wheels for 2021-2024 Nissan Kicks (First Generation, Facelift)
- 16-inch Steel Wheel (Kicks S)
- 17-inch Alloy Wheels (Kicks SV & SR)
- Wheels for 2025-2026 Nissan Kicks (Second Generation)
- 16-inch Steel Wheel (Kicks S)
- 17-inch and 19-inch Alloy Wheels (Kicks SV & SR)
- Technical Specifications
- What Happens if the Offset is Wrong?
- Symptoms of a Failing or Damaged Wheel
- Known Issues, Recalls, and Service Bulletins
- Buying a Used Wheel: What to Look For
- Cost Comparison for a Single 17-inch Kicks Wheel
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off