2024-2025 Tesla Cybertruck Center Console Rear Trim Cap: Inspection and Replacement
This guide covers the common causes of damage to the rear center console trim cap and what to look for when buying a used replacement.
- This article is for the INTERIOR Center Console Rear Trim Cap (Part #1850332), not the recalled exterior panels.
- When buying a used panel, the condition of the rear mounting clips is the most important factor; do not buy one with broken clips.
- Replacement is a very easy DIY job requiring only a plastic trim tool and about five minutes.
- Failure is always physical (broken clips, cracks, scuffs) and does not affect the vehicle's operation.
Symptoms of a Damaged Center Console Rear Trim Cap
Failure of this part is purely physical and cosmetic. You will not experience any mechanical or electrical issues, nor will you see any dashboard warning lights. Instead, look for visible signs of damage:
- Loose Fit or Rattling: This is the most common symptom and is almost always caused by broken mounting clips on the back of the panel. If the panel feels loose, rattles when you tap it, or has a noticeable gap around the edges, the clips have likely failed.
- Visible Cracks: Hard impacts from shoes, bags, or other objects can cause the plastic to crack. While small hairline cracks might be cosmetic, larger cracks can compromise the panel's structural integrity and lead to it breaking apart.
- Deep Scratches and Gouges: The panel's location at floor level makes it susceptible to scuffs and scratches from everyday use. While light scuffs are normal, deep gouges can be unsightly and are impossible to repair.
Important: This interior trim piece is NOT related to the widely publicized recalls for the Cybertruck's exterior trim, such as the 'cant rail' or 'sail applique'. Those recalls concern exterior metal panels 🎬 Watch: Complete teardown of the Cybertruck interior and exterior that could detach from the vehicle. A damaged interior console cap is a cosmetic issue and does not pose a safety risk while driving.
Buying a Used Center Console Rear Trim Cap
Because this is a simple, non-electronic part, a used OEM (Original Equipment Manufacturer) panel is an excellent, cost-effective alternative to buying new from Tesla. Aftermarket versions are generally not available for specific interior trim like this. When buying a used part, inspection is key.
What to Check Before You Buy:
- Mounting Clips are Essential: This is the most critical inspection point. Turn the panel over and carefully examine every mounting clip and tab. They should all be present and free of stress marks or cracks. A panel with even one broken clip may not sit flush or could rattle after installation. Do not purchase a panel with broken mounting points.
- Inspect for Cracks, Not Just Scratches: Differentiate between surface scuffs and structural cracks. Minor scuffs and scratches are purely cosmetic and are to be expected on a used interior part. However, any crack, no matter how small, is a point of failure. Flex the panel slightly to see if any cracks open up.
- Verify the Part Number: The primary part number is 1850332. However, you may see different suffixes, such as 1850332-88-E or 1850332-00-E. These suffixes often denote minor changes in color, texture, or production runs. To ensure a perfect match, it's best to find a used part with the exact same full number as the one you are replacing.
Pro Tip: When you receive a used trim panel, clean it thoroughly with an interior-safe cleaner and apply a plastic protectant before installation. This will help restore its finish and make it look closer to new.
Replacement Difficulty: 1 out of 5
Replacing this panel is a very simple DIY job that should take less than five minutes. It requires no special expertise.
- Estimated Time: 5 minutes
- Tools Needed: Plastic trim removal tool
- DIY Feasible: Yes
Basic Replacement Steps:
- Using a plastic trim removal tool, carefully insert the tool into the seam between the console body and the rear cap.
- Gently pry outwards to release the clips. Work your way around the panel until it pops free.
- Align the clips of the new panel with the corresponding slots on the center console.
- Firmly press the new panel into place until you hear and feel the clips click, securing it to the console. 🎬 Watch: How to access and disassemble the center console
Cost Comparison
Pricing for this part can vary, but buying used offers significant savings over a new part from the dealer.
| Part Type | Estimated Cost |
|---|---|
| New OEM (Tesla) | $75 - $150 (estimate) |
| Used OEM (Salvage) | $50 - $80 |
| New Aftermarket | Not Available |
| Shop Labor | $0 (DIY recommended) - $60 (0.5hr minimum) |
Technical Specifications and Part Numbers
This part is specific to the 2024-2025 Tesla Cybertruck. Always verify the part number on your original part before ordering a replacement.
- Known OEM Part Numbers: 1850332, 1850332-88-E, 1850332-00-E
- Material: Molded plastic/composite
- Location: Interior, rear-facing end of the center console
Frequently Asked Questions (FAQ)
Is this the same as the recalled Cybertruck trim panel?
No. This is a small, plastic interior trim piece for the center console. The recalls you may have heard about are for large, exterior stainless-steel trim panels (the 'cant rail' and 'sail applique') that could detach while driving. This interior part is unrelated and poses no safety risk.
🎬 See: Common Cybertruck trim issues and rattles explainedWhy is my console's rear trim loose?
The most likely reason is that one or more of the plastic mounting clips on the back of the panel have broken, which is common from being kicked by rear passengers. The only solution is to replace the panel.
What is the difference between part numbers 1850332-88-E and 1850332-00-E?
The suffixes (-88-E, -00-E) typically indicate different production runs, revisions, or slight variations in color or finish. While they are likely interchangeable, the safest approach is to match the full part number from your original part to guarantee an identical replacement.
Can I repair a cracked trim cap?
Repairing cracked interior plastic is generally not recommended. Adhesives like super glue or epoxy will likely be visible and may not hold up to future impacts. Given the low cost of a used replacement, replacing the part is the best option for a clean, durable result.
Helpful Videos
Technical Specifications
OEM Part Numbers: 1850332 1850332-88-E 1850332-00-E
Molded plastic interior trim panel for the rear of the center console.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Tesla Cybertruck: