2023-2025 Kia Soul Sun Visor: Decoding Part Numbers for Sunroof vs. Non-Sunroof Models

Symptoms of a Failing Sun Visor

Since the 2023-2025 Kia Soul is a relatively new vehicle, widespread failures are uncommon. However, when a sun visor does fail, the symptoms are usually obvious and consistent with issues seen across many vehicles.

• Drooping or Sagging: This is the most common failure. The visor will not stay in its stowed position against the headliner, constantly falling into your line of sight. 🎬 Watch: How to fix a floppy Kia Soul sun visor This is caused by wear in the internal pivot mechanism that provides friction.
• Loose Pivot Point: The visor feels wobbly or loose where it mounts to the roof. Before replacing the entire unit, it's worth checking if the mounting screws have simply backed out.
• Rattling Noises: A rattling or clicking sound when driving over bumps can indicate a loose mounting clamp or a broken internal component.
• Vanity Light Failure: The light in the mirror may flicker or fail to turn on when the cover is opened. This can be due to a burnt-out bulb or a faulty switch within the visor assembly.
• Broken Mirror or Cover: Physical damage like a cracked mirror or a broken hinge on the mirror cover is another reason for replacement.

Known Issues, Recalls, and Technical Service Bulletins (TSBs)

As of early 2026, there are no mechanical failure recalls or TSBs for the sun visor assembly on the 2023-2025 Kia Soul.

However, a relevant non-compliance safety recall was issued for some 2023 Kia models, including the Soul (NHTSA Campaign: 23V-579). This recall addresses an issue where the airbag warning label on the sun visor could peel off. A detached label violates Federal Motor Vehicle Safety Standards. The official remedy is for a dealer to inspect the label and, if it is peeling, replace the entire sun visor assembly free of charge. If your vehicle is affected, this is the easiest way to get a new visor.

Part Variants and Compatibility: The Sunroof Difference

The single most important factor when buying a replacement sun visor for a 2023-2025 Kia Soul is whether your vehicle is equipped with a sunroof. Two different versions of the visor exist, and they are not interchangeable. Using the wrong one will result in improper fitment.

Decoding Kia Soul Sun Visor Part Numbers

The OEM part numbers provided by Kia clearly distinguish between side, and most importantly, the sunroof configuration. The final three letters, HGC, are the color code, which for this model is typically a standard gray or black that matches the headliner.

How to Verify Your Interior Color

While the 'HGC' color code is standard for these visors, it's always wise to confirm your vehicle's interior trim code. You can find this code on the manufacturer's sticker located in the driver's side door jamb. This ensures a perfect match, which is especially important when buying a used part that may have come from a vehicle with a slightly different shade of headliner. The 2023-2025 Soul was offered with interiors like Black Woven Cloth, Gray Two-Tone, and Black/White SynTex.

Buying a Used 2023-2025 Kia Soul Sun Visor

Because a sun visor is a simple, non-wear part, a used OEM visor is an excellent, cost-effective option. Aftermarket visors for such new models are rare and may not match the interior fabric, color, and fit as precisely as a genuine Kia part.

What to Inspect Before You Buy

• Confirm the Part Number: This is the most critical step. Ensure the part number matches your vehicle's needs (With or Without Sunroof).
• Check the Pivot: Ask the seller to confirm the pivot is stiff and holds its position. It should not feel loose or floppy.
• Inspect the Fabric and Mirror: Check photos for any stains, tears, or separation of the cloth. Ensure the mirror and its cover are not cracked or broken.
• Verify the Electrical Connector: Make sure the small plastic electrical connector and its wires are intact and not damaged.

Sun Visor Replacement Guide (DIY)

Replacing the sun visor on a 2023-2025 Kia Soul is a very easy DIY job 🎬 See this quick sun visor replacement walkthrough that takes about 10-15 minutes.

Tools Needed

• Phillips head screwdriver
• Plastic trim removal tool or a small flathead screwdriver

Step-by-Step Instructions

1. Pry Open the Screw Cover: At the base of the sun visor where it mounts to the roof, there is a plastic cover. Use a trim tool or carefully use a flathead screwdriver to pry this cover open. It is held on by clips and will pop off.
2. Disconnect the Electrical Plug: Once the cover is off, you will see a small electrical connector for the vanity light. Press the tab and unplug it.
3. Remove the Mounting Screws: While holding the sun visor to prevent it from falling, use the Phillips screwdriver to remove the two screws holding the mounting bracket to the roof.
4. Remove the Old Visor: With the screws out and the wire unplugged, the visor can be fully removed.
5. Install the New Visor: Installation is the reverse of removal. Plug in the electrical connector on the new visor, align it with the screw holes, and tighten the two screws snugly. Do not overtighten, as this can strip the mounting holes. Snap the plastic cover back into place.

Cost Comparison

Sun visor replacement is an inexpensive repair, especially if you do it yourself.

Frequently Asked Questions (FAQ)