2022-2024 Lucid Air Frunk Trim & Cover: Solving Fitment, Latch, and Damage Issues
Your definitive guide to inspecting, replacing, and troubleshooting the front trunk (frunk) storage compartment trim panels and covers for the Lucid Air.
- This 'Storage Compartment' is the trim/cover for the front trunk (frunk), not an interior cabin part.
- When buying used, the single most important check is for broken mounting tabs on the back of the panel.
- A common issue with the frunk system is the lid failing to open on the first try, which is related to the latch striker, not the trim itself.
- Replacement is a very easy DIY job (1/5 difficulty) that requires only a plastic trim removal tool.
Identifying the Correct Part
When searching for a 'Storage Compartment' for the 2022-2024 Lucid Air, it's important to clarify the location. The OEM part numbers P11-E75200 and P11-E75700-03 do not refer to interior cabin storage like the center console or glove box. Instead, these numbers correspond to trim panels and covers located within the front trunk (frunk). These pieces make up the lining and floor of the forward storage area.
Symptoms of Failure
As these are non-electronic, static trim pieces, 'failure' relates exclusively to physical condition. You will not see any error codes or experience drivability issues from a damaged frunk panel. Instead, look for physical signs of damage.
- Cracks and Fractures: Heavy or sharp-edged cargo can cause the plastic to crack. These cracks can compromise the panel's structural integrity and lead to rattling.
- Broken Mounting Tabs: The most critical failure point. These panels are held in place by a series of plastic clips and tabs molded into the back. If these break, the panel will not sit flush, may vibrate, rattle, or fall out of place completely.
- Scuffs and Gouges: Deep scratches and gouges from loading and unloading items are common. While usually cosmetic, deep gouges can weaken the panel.
- Warping or Stains: Spills from chemicals or heat from external sources could potentially warp or discolor the plastic, affecting its fit and appearance.
Known Issues & Owner Complaints
While there are no official recalls or Technical Service Bulletins (TSBs) for the frunk trim panels themselves, Lucid Air owners have reported a common issue with the frunk's operating mechanism that you may encounter while working in this area.
Frunk Fails to Open on First Attempt
A widely discussed issue is the frunk lid failing to open on the first try. Owners report that they command the frunk to open (via the app, key fob, or screen), and the lid unlatches but then immediately closes itself. A second attempt is almost always successful. According to service reports from owners, this is often caused by a misaligned latch striker. While this is not a failure of the trim panel itself, it is the most common problem associated with the frunk assembly where these parts are located.
Pro Tip: If you are replacing a frunk trim panel due to damage, it's a good opportunity to inspect the latch and striker alignment. If you've experienced the 'fail-to-open' issue, mention it to your service provider if the vehicle is in for other work.
Buying a Used Frunk Trim Panel
Given the high cost of new OEM parts for Lucid vehicles, a used OEM panel is often the most economical choice. Since these are simple cosmetic parts, a used one in good condition is just as effective as a new one. Here’s what to inspect:
- Inspect All Mounting Points: This is the most important check. Ask the seller for clear, high-resolution photos of the back of the panel. Look at every single mounting tab and clip receiver. Ensure none are cracked, stressed, or broken off. A panel with even one broken tab may not install securely and could lead to persistent rattles.
- Check for Hidden Cracks: Look closely at the edges and corners for hairline cracks that may not be obvious in low-quality photos. Damage is often described by sellers in listings.
- Verify the Part Number: Match the part number (e.g., P11-E75200) to the specific piece you are replacing to ensure you are buying the correct panel for the correct location within the frunk.
- Cosmetic Condition: Assess the level of scratches and scuffs. Minor wear is expected on a used part from a cargo area, but avoid panels with deep gouges or chemical stains.
Replacement Information
Replacing a frunk trim panel is a straightforward task suitable for DIYers with basic tools.
- Difficulty: 1 out of 5
- Estimated Time: 15-30 minutes
- Tools Required: Plastic trim removal tool kit.
The process generally involves using a plastic pry tool to carefully release the clips holding the panel in place. Start at one edge and work your way around the panel until all clips are disengaged. Installation is the reverse of removal: align the clips with their corresponding holes in the vehicle body and press firmly until each clip snaps into place.
Cost Comparison
Aftermarket options for Lucid-specific trim are not available. Your options are new OEM from a Lucid service center or used OEM from an auto recycler.
| Part Type | Estimated Cost |
|---|---|
| New OEM | $200 - $350 (estimate, dealer purchase) |
| Used OEM | $75 - $150 |
| Shop Labor | $75 - $250 (0.5-1.0 hour minimum) |
Frequently Asked Questions (FAQ)
Why won't my Lucid Air's frunk open on the first try?
This is a common issue reported by owners, often caused by a misaligned frunk latch striker. The trim panels themselves are not the cause. The lid unlatches but immediately re-latches. A second attempt usually works.
Is it difficult to replace a frunk trim panel myself?
No, this is considered a very easy DIY task. With a simple plastic trim removal tool, the panels can be safely pried off and the new one snapped into place in under 30 minutes. The installation difficulty is a 1 out of 5.
What is the most important thing to check when buying a used frunk panel?
The condition of the mounting tabs on the back of the panel is the most critical factor. Even if the front surface looks perfect, a single broken tab can prevent the panel from fitting securely and may cause rattles. Always get clear pictures of the back before buying.
Are there any recalls for the Lucid Air frunk trim?
No, as of mid-2024, there are no safety recalls or TSBs issued by Lucid or the NHTSA that specifically address the frunk trim panels or covers.
Technical Specifications
OEM Part Numbers: P11-E75200 P11-E75700-03
Material: Molded plastic/polymer composite
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- LUCID AIR: